Warpage Analysis of a Plastic Spur Gear Injection Molding

Dyi Cheng Chen, Chen Kun Huang, Jie Wen Lin

研究成果: Article同行評審

3 引文 斯高帕斯(Scopus)

摘要

The effect of various factors on the amount of warpage in an injection molded product was investigated and a plastic spur gear was used as an example. The research involved the design of a mold and die, computer-aided engineering, simulation analysis, and the determination of the plastic material and parameters. Simulation results were verified by experiment using the fabricated mold and die. Small warpage was determined using software, and the Taguchi and Response Surface Methods were used to determine the optimal parameter combinations. The optimum parameters were found to be: injection pressure, 105 MPa; packing pressure, 70 MPa; packing time, 19 s; mold temperature, 60 °C; and plastic temperature, 190 °C. The experiments were repeated, and the results were compared with the simulations to verify the reliability of the simulation results.

原文English
頁(從 - 到)206-213
頁數8
期刊Smart Science
5
發行號4
DOIs
出版狀態Published - 2017 十月 2

All Science Journal Classification (ASJC) codes

  • Chemistry (miscellaneous)
  • Modelling and Simulation
  • Energy (miscellaneous)
  • Engineering(all)
  • Fluid Flow and Transfer Processes
  • Computer Networks and Communications
  • Computational Mathematics

指紋 深入研究「Warpage Analysis of a Plastic Spur Gear Injection Molding」主題。共同形成了獨特的指紋。

引用此