Integration automatic warehouse and network with two-ways communication in CIM system

Seng Yuh Liou, Yuau Tay Chen, Chao Wei Chang, Menq-Jiun Wu

研究成果: Paper

3 引文 斯高帕斯(Scopus)

摘要

The automatic warehouse system is a very important unit in the computer integration system. It is also a mechatronic system. In the factory the automatic warehouse will manage efficiently goods and save a lot of the storage space. In this article an automatic warehouse with the graphic monitor system of a CIM training system is presented. The graphic monitor system set the monitor point which may be represented as a sensor or a switch on the hardware system of the automatic warehouse. The control system is OMRON C200H PLC which linked with the graphic monitor system. Every monitor point represents a bit of PLC. When the on/off of bit causes the monitor graphics change which present the state of the operating machine. The communication module of PLC will receive or transmit the data from/to the network control center. The data include input/output condition, material number, and completion signal. According to the data PLC start to transmit the pulses from the position control module to rotate the stepping motor of the automatic guided vehicle to the design position in the x direction, and the cargo pallet will move along the vertical axis to the right cell of the storage frame to store/retrieve goods.

原文English
頁面262-266
頁數5
出版狀態Published - 1995 十二月 1
事件Proceedings of the 1995 International IEEE/IAS Conference on Industrial Automation and Control: Emerging Technologies - Taipei, Taiwan
持續時間: 1995 五月 221995 五月 27

Other

OtherProceedings of the 1995 International IEEE/IAS Conference on Industrial Automation and Control: Emerging Technologies
城市Taipei, Taiwan
期間95-05-2295-05-27

    指紋

All Science Journal Classification (ASJC) codes

  • Engineering(all)

引用此

Liou, S. Y., Chen, Y. T., Chang, C. W., & Wu, M-J. (1995). Integration automatic warehouse and network with two-ways communication in CIM system. 262-266. 論文發表於 Proceedings of the 1995 International IEEE/IAS Conference on Industrial Automation and Control: Emerging Technologies, Taipei, Taiwan, .