Geometry and simulation of the generation of cylindrical gears by an imaginary disc cutter

Hsueh-Cheng Yang Yang, Tsang Lang Liang

研究成果: Article

摘要

This paper proposed a method of representing the geometry of an imaginary disc cutter in parameter form. The undercutting condition of the imaginary disc cutter is studied, and the mathematical model of the generated gears is developed by the undercutting condition of the cutter. Through a mathematical model of the generation process, the vector equations of generated gears are established. According to the proposed method, a planetary gear mechanism and a pair of gear pump with smaller numbers of teeth are illustrated. A cutting simulation process is presented for machining the proposed gear pairs. Stress analysis for the proposed gear mechanism is performed. Finally, the proposed method is applied to determine singular points of the proposed disc cutter.

原文English
頁(從 - 到)411-428
頁數18
期刊Transactions of the Canadian Society for Mechanical Engineering
33
發行號3
出版狀態Published - 2009 十二月 1

指紋

Gears
Geometry
Mathematical models
Gear pumps
Stress analysis
Machining

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering

引用此文

@article{a64ed4bee92c42dcbe29c17099cd8f10,
title = "Geometry and simulation of the generation of cylindrical gears by an imaginary disc cutter",
abstract = "This paper proposed a method of representing the geometry of an imaginary disc cutter in parameter form. The undercutting condition of the imaginary disc cutter is studied, and the mathematical model of the generated gears is developed by the undercutting condition of the cutter. Through a mathematical model of the generation process, the vector equations of generated gears are established. According to the proposed method, a planetary gear mechanism and a pair of gear pump with smaller numbers of teeth are illustrated. A cutting simulation process is presented for machining the proposed gear pairs. Stress analysis for the proposed gear mechanism is performed. Finally, the proposed method is applied to determine singular points of the proposed disc cutter.",
author = "Yang, {Hsueh-Cheng Yang} and Liang, {Tsang Lang}",
year = "2009",
month = "12",
day = "1",
language = "English",
volume = "33",
pages = "411--428",
journal = "Transactions of the Canadian Society for Mechanical Engineering",
issn = "0315-8977",
publisher = "Canadian Society for Mechanical Engineering",
number = "3",

}

TY - JOUR

T1 - Geometry and simulation of the generation of cylindrical gears by an imaginary disc cutter

AU - Yang, Hsueh-Cheng Yang

AU - Liang, Tsang Lang

PY - 2009/12/1

Y1 - 2009/12/1

N2 - This paper proposed a method of representing the geometry of an imaginary disc cutter in parameter form. The undercutting condition of the imaginary disc cutter is studied, and the mathematical model of the generated gears is developed by the undercutting condition of the cutter. Through a mathematical model of the generation process, the vector equations of generated gears are established. According to the proposed method, a planetary gear mechanism and a pair of gear pump with smaller numbers of teeth are illustrated. A cutting simulation process is presented for machining the proposed gear pairs. Stress analysis for the proposed gear mechanism is performed. Finally, the proposed method is applied to determine singular points of the proposed disc cutter.

AB - This paper proposed a method of representing the geometry of an imaginary disc cutter in parameter form. The undercutting condition of the imaginary disc cutter is studied, and the mathematical model of the generated gears is developed by the undercutting condition of the cutter. Through a mathematical model of the generation process, the vector equations of generated gears are established. According to the proposed method, a planetary gear mechanism and a pair of gear pump with smaller numbers of teeth are illustrated. A cutting simulation process is presented for machining the proposed gear pairs. Stress analysis for the proposed gear mechanism is performed. Finally, the proposed method is applied to determine singular points of the proposed disc cutter.

UR - http://www.scopus.com/inward/record.url?scp=77955809776&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77955809776&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:77955809776

VL - 33

SP - 411

EP - 428

JO - Transactions of the Canadian Society for Mechanical Engineering

JF - Transactions of the Canadian Society for Mechanical Engineering

SN - 0315-8977

IS - 3

ER -