Fabrication of micro-optical switch by post-CMOS micromachining process

Ying Chou Cheng, Chi Yuan Lee, Ching Liang Dai, Wen Jong Chen, Pei Zen Chang, Ping Hei Chen

研究成果: Conference article同行評審


This work presents the micro-machined 2-D switch array for use on free-space optical interconnect platform integrated with a digital 1×8 de-multiplexer control circuit together. Moreover, this device employs electrostatic actuation for light beam directions control. The CMOS-MEMS array-based optical platform contains 10×10 circular micromirrors switching spots, the diameter of each mirror is about 50 μm and the overall chip size is around 2 mm by 2 mm. The commercialized simulation softwares were used to validate the micromirror design and elucidate the behavior of the micromirror before fabrication. The post-process simply employs HF based solution to etch silicon dioxide layer to release the suspended mirror structures. The micromirror array is actuated using an electrostatic force. The results reveal that the micromirror has a tilting angle of around 8° according to the triangular relation with a driving voltage of 18V at pull down state. Also described herein are the general principles of the light-beam switching method used, the detailed of device design, the post-CMOS fabrication process flow, the result of simulations and preliminary experimental results are discussed.

頁(從 - 到)274-283
期刊Proceedings of SPIE - The International Society for Optical Engineering
出版狀態Published - 2004 十二月 2
事件MEM, MOEMS, and Micromachining - Strasbourg, France
持續時間: 2004 四月 292004 四月 30

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

指紋 深入研究「Fabrication of micro-optical switch by post-CMOS micromachining process」主題。共同形成了獨特的指紋。