Development of a flat type six-axis stage based on piezoelectric actuators

Hau Wei Lee, Tsung Ting Hsieh, Chin Chia Liu, Chien Hung Liu

研究成果: Article

2 引文 斯高帕斯(Scopus)

摘要

This study presents and investigates a six-DOF (degrees of freedom) piezoelectric based stage for positioning error compensation. The relationship between the displacement of the piezoelectric actuators and the stage can be computed according to the geometric relationships of the actuators installed. In this study, a feedforward compensator based on the hysteresis model has been designed for compensation and a PI controller was used for positioning. The combination of a feedforward compensator and PI controller gives the stage good positioning and tracking performance. Stage position information is feedback from a six-DOF optical measurement system comprised of three modular two-dimensional measurement devices. Each module employs a quadrant photodiode (QPD), a laser diode, and a lens. The measurement signal is acquired and processed using an FPGA based processor for real time control. The linear and angular positioning resolution is 0.02 m and 0.1 arcsec, respectively. When the stage is controlled in a closed loop, the positioning errors are in the range of ± 0.1 m and ± 0.5 arcsec. The stage is controlled to track a sinusoidal wave with an amplitude of 2.5 m and a frequency of 5 Hz; tracking errors were within ± 0.1 m and ± 0.2 arcsec.

原文English
文章編號523786
期刊Mathematical Problems in Engineering
2014
DOIs
出版狀態Published - 2014

All Science Journal Classification (ASJC) codes

  • Mathematics(all)
  • Engineering(all)

指紋 深入研究「Development of a flat type six-axis stage based on piezoelectric actuators」主題。共同形成了獨特的指紋。

  • 引用此