Band-notched ultra-wideband bandpass filter design using combined modified quarter-wavelength tri-section stepped-impedance resonator

C. H. Lee, C. I.G. Hsu, L. Y. Chen

研究成果: Article

26 引文 斯高帕斯(Scopus)

摘要

This study presents a new band-notched ultra-wideband (UWB) bandpass filter (BPF) that is designed using a new structure-shared multi-mode resonator (MMR). The MMR is formed by combining two quarter-wavelength (λ/4) tri-section stepped-impedance resonators (TSSIRs) in a proper fashion to exhibit both λ/4 and half-wavelength (λ/2) types of resonance. With the first two resonant frequencies of the inherent λ/4 TSSIR, the first two of the parasitic λ/2 SIR and the coupling peaks of the input/output interdigital parallel-coupled lines properly located in the UWB passband, a six-transmission-pole UWB BPF can be realised. In this filter design, besides obtaining a uniform in-band transmission response, a notched band centred around 5.5GHz is created by embedding L-shaped open-end slots in the TSSIR and loading the TSSIR with closely coupled winding-type resonators (WTRs) to filter out the 5-GHz wireless local-area network radio signal interferences. In addition, spur-lines are embedded in the TSSIR to sharpen the passband skirts for selectivity improvement.

原文English
頁(從 - 到)1232-1236
頁數5
期刊IET Microwaves, Antennas and Propagation
3
發行號8
DOIs
出版狀態Published - 2009 十一月 19

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

指紋 深入研究「Band-notched ultra-wideband bandpass filter design using combined modified quarter-wavelength tri-section stepped-impedance resonator」主題。共同形成了獨特的指紋。

  • 引用此