Analysis and dsp implementation of a broadband duct anc system using spatially feedforward structure

Mingsian R. Bai, Yujeng Lin, Jian Da Wu

研究成果: Article

3 引文 斯高帕斯(Scopus)

摘要

The active control technique for broadband attenuation of noise in ducts, using spatially feedforward structure, is investigated from the viewpoints of both acoustic analysis and control engineering. According to the previous work by Munjal and Eriksson [1], there exists an ideal controller for this problem. The ideal controller is a function of the finite source impedance and is thus independent of the boundary conditions. Despite the simplicity, the ideal controller cannot be practically implemented due to the difficulty of calibration of electro-mechanical parameters. To overcome the problem, the controller is implemented via an equivalent formulation modified from the controller originally proposed by Roure [2]. The modified controller is implemented on a DSP platform, using a FIR filter, an IIR filter and a hybrid filter. The experimental results showed that the system achieved 17.2 dB maximal attenuation in the frequency band 300;600 Hz. Physical insights and design considerations in implementation phase are also discussed in the paper.

原文English
頁(從 - 到)129-136
頁數8
期刊Journal of Vibration and Acoustics, Transactions of the ASME
123
發行號2
DOIs
出版狀態Published - 2001 四月

All Science Journal Classification (ASJC) codes

  • Acoustics and Ultrasonics
  • Mechanics of Materials
  • Mechanical Engineering

指紋 深入研究「Analysis and dsp implementation of a broadband duct anc system using spatially feedforward structure」主題。共同形成了獨特的指紋。

  • 引用此