An adaptive steganographic method based on the measurement of just noticeable distortion profile

Ju-Yuan Hsiao, Chieh Tse Chang

研究成果: Article

9 引文 (Scopus)

摘要

This paper presents an adaptive steganographic method based on just noticeable distortion (JND) profile measurement. According to the input requirements, our method can produce a higher quality or higher embedding capacity stego-image. In the embedding secret data bits into a target pixel process, four different impact factors are utilized to compute how much information can be embedded and what the stego-pixel value will be. These are difference values that represent the correlation between neighboring pixels, the JND value of the target pixel, a predefined embedding capacity control factor, and the contents of various lengths secret data bits. The proposed method embeds more secret data bits within complex areas and less data bits in smooth areas. The difference between the target pixel and the stego-pixel values is controlled, as far as possible, to less than or equal to the JND value of the target pixel. Thus, the stego-image maintains good imperceptible property. In the extraction phase, the embedded secret data can be extracted from the stego-image without referencing the original image and the JND profile. The experimental results show that our method improves stego-image quality and conspicuously increases the embedding capacity at the same time.

原文English
頁(從 - 到)155-166
頁數12
期刊Image and Vision Computing
29
發行號2-3
DOIs
出版狀態Published - 2011 一月 1

指紋

Pixels
Image quality

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

引用此文

@article{76bc4e84b4ef475995f1a4f58b2e8f0c,
title = "An adaptive steganographic method based on the measurement of just noticeable distortion profile",
abstract = "This paper presents an adaptive steganographic method based on just noticeable distortion (JND) profile measurement. According to the input requirements, our method can produce a higher quality or higher embedding capacity stego-image. In the embedding secret data bits into a target pixel process, four different impact factors are utilized to compute how much information can be embedded and what the stego-pixel value will be. These are difference values that represent the correlation between neighboring pixels, the JND value of the target pixel, a predefined embedding capacity control factor, and the contents of various lengths secret data bits. The proposed method embeds more secret data bits within complex areas and less data bits in smooth areas. The difference between the target pixel and the stego-pixel values is controlled, as far as possible, to less than or equal to the JND value of the target pixel. Thus, the stego-image maintains good imperceptible property. In the extraction phase, the embedded secret data can be extracted from the stego-image without referencing the original image and the JND profile. The experimental results show that our method improves stego-image quality and conspicuously increases the embedding capacity at the same time.",
author = "Ju-Yuan Hsiao and Chang, {Chieh Tse}",
year = "2011",
month = "1",
day = "1",
doi = "10.1016/j.imavis.2010.08.010",
language = "English",
volume = "29",
pages = "155--166",
journal = "Image and Vision Computing",
issn = "0262-8856",
publisher = "Elsevier Limited",
number = "2-3",

}

An adaptive steganographic method based on the measurement of just noticeable distortion profile. / Hsiao, Ju-Yuan; Chang, Chieh Tse.

於: Image and Vision Computing, 卷 29, 編號 2-3, 01.01.2011, p. 155-166.

研究成果: Article

TY - JOUR

T1 - An adaptive steganographic method based on the measurement of just noticeable distortion profile

AU - Hsiao, Ju-Yuan

AU - Chang, Chieh Tse

PY - 2011/1/1

Y1 - 2011/1/1

N2 - This paper presents an adaptive steganographic method based on just noticeable distortion (JND) profile measurement. According to the input requirements, our method can produce a higher quality or higher embedding capacity stego-image. In the embedding secret data bits into a target pixel process, four different impact factors are utilized to compute how much information can be embedded and what the stego-pixel value will be. These are difference values that represent the correlation between neighboring pixels, the JND value of the target pixel, a predefined embedding capacity control factor, and the contents of various lengths secret data bits. The proposed method embeds more secret data bits within complex areas and less data bits in smooth areas. The difference between the target pixel and the stego-pixel values is controlled, as far as possible, to less than or equal to the JND value of the target pixel. Thus, the stego-image maintains good imperceptible property. In the extraction phase, the embedded secret data can be extracted from the stego-image without referencing the original image and the JND profile. The experimental results show that our method improves stego-image quality and conspicuously increases the embedding capacity at the same time.

AB - This paper presents an adaptive steganographic method based on just noticeable distortion (JND) profile measurement. According to the input requirements, our method can produce a higher quality or higher embedding capacity stego-image. In the embedding secret data bits into a target pixel process, four different impact factors are utilized to compute how much information can be embedded and what the stego-pixel value will be. These are difference values that represent the correlation between neighboring pixels, the JND value of the target pixel, a predefined embedding capacity control factor, and the contents of various lengths secret data bits. The proposed method embeds more secret data bits within complex areas and less data bits in smooth areas. The difference between the target pixel and the stego-pixel values is controlled, as far as possible, to less than or equal to the JND value of the target pixel. Thus, the stego-image maintains good imperceptible property. In the extraction phase, the embedded secret data can be extracted from the stego-image without referencing the original image and the JND profile. The experimental results show that our method improves stego-image quality and conspicuously increases the embedding capacity at the same time.

UR - http://www.scopus.com/inward/record.url?scp=78649746848&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78649746848&partnerID=8YFLogxK

U2 - 10.1016/j.imavis.2010.08.010

DO - 10.1016/j.imavis.2010.08.010

M3 - Article

AN - SCOPUS:78649746848

VL - 29

SP - 155

EP - 166

JO - Image and Vision Computing

JF - Image and Vision Computing

SN - 0262-8856

IS - 2-3

ER -