尋找研究成果

搜尋結果

• Article

  A block-based division reversible data hiding method in encrypted images

  Liu, W. L., Leng, H. S., Huang, C. K. & Chen, D. C., 2017 十二月 1, 於: Symmetry. 9, 12, 308.

  研究成果: Article › 同行評審

  • Data Hiding
  • Division
  • division
  • Pixels
  • Digital storage
  6 引文 斯高帕斯（Scopus）

• An Investigation into CIGS Thin-Films Solar Cell P2 Layer Scribing Depth and Width Using Different Laser Process Parameters

  Chen, D. C., Chen, M. F. & Chen, M. R., 2015, 於: Advances in Materials Science and Engineering. 2015, 894673.

  研究成果: Article › 同行評審

  • Thin film solar cells
  • Lasers
  • Stainless Steel
  • Stainless steel
  • Solar cells
  1 引文 斯高帕斯（Scopus）

• An investigation into suitable friction factor and optimized forming process of 6061 aluminum alloy bicycle stem

  Chen, D-C., Lin, J. G., Chu, Y. T. & Shiu, J. R., 2015 二月 1, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 36, 1, p. 41-48 8 p.

  研究成果: Article › 同行評審

  • Bicycles
  • Aluminum alloys
  • Friction
  • Metal forming
  • Aluminum

• Application of ANOVA and taguchi-based mutation particle swarm algorithm for parameters design of multi-hole extrusion process

  Chen, W. J., Su, W. C., Nian, F. L., Lin, J. R. & Chen, D. C., 2013, 於: Research Journal of Applied Sciences, Engineering and Technology. 6, 13, p. 2316-2325 10 p.

  研究成果: Article › 同行評審

  • Analysis of variance (ANOVA)
  • Extrusion
  • Bending (forming)
  • Taguchi methods
  • Particle swarm optimization (PSO)
  4 引文 斯高帕斯（Scopus）

• Application of ductile fracture criterion for tensile test of zirconium alloy 702

  Chen, D. C., Chang, D. Y., Chen, F. H. & Kuo, T. Y., 2018 三月 1, 於: Scientia Iranica. 25, 2B, p. 824-829 6 p.

  研究成果: Article › 同行評審

  • Zirconium alloys
  • Ductile fracture
  • Finite element method
  • Fracture energy
  • Materials properties
  2 引文 斯高帕斯（Scopus）

• Application of response surface methodology and elitist multi-objective hybrid particle swarm algorithm for optimization design of an air-core linear motor

  Chen, W-J., Su, W. C., Chen, D-C. & Nian, F. L., 2012 十一月 1, 於: International Journal of Advancements in Computing Technology. 4, 20, p. 72-81 10 p.

  研究成果: Article › 同行評審

  • Linear motors
  • Magnets
  • Sorting
  • Air
  • Multiobjective optimization

• Application of the Taguchi method for finite element analysis of a shear-type magnetorheological fluid damper

  Chen, D. C. & Chen, L. R., 2020, 於: Advances in Mechanical Engineering. 12, 4

  研究成果: Article › 同行評審

  開啟存取

  • Magnetorheological fluids
  • Taguchi methods
  • Pistons
  • Finite element method
  • Magnetic flux
  1 引文 斯高帕斯（Scopus）

• Development of assessment indicators for measuring the student learning effects of artificial intelligence-based robot design

  Shyr, W-J., Yang, F. C., Liu, P. W., Hsieh, Y. M., You, C. S. & Chen, D-C., 2019 七月 1, 於: Computer Applications in Engineering Education. 27, 4, p. 863-868 6 p.

  研究成果: Article › 同行評審

  • learning success
  • robot
  • artificial intelligence
  • Artificial intelligence
  • Students
  1 引文 斯高帕斯（Scopus）

• Development of professional competencies for artificial intelligence in finite element analysis

  Chen, D. C., You, C. S. & Su, M. S., 2020 一月 1, (Accepted/In press) 於: Interactive Learning Environments.

  研究成果: Article › 同行評審

  • artificial intelligence
  • Artificial intelligence
  • Finite element method
  • questionnaire
  • training plan

• Diamond shape division reversible data hiding in encrypted images

  Huang, C. K., Chen, D. C., Liu, W. L. & Huang, S. C., 2017 十二月 1, 於: ICIC Express Letters, Part B: Applications. 8, 12, p. 1559-1566 8 p.

  研究成果: Article › 同行評審

  • Diamonds
  • Pixels
  • Statistical methods

• Die stress analysis and improvement of the welding valve fastener in multi-stage forging

  Tzou, G. Y., Lin, S. H., Chen, D. C. & Chai, U. C., 2020 一月 1, 於: Transactions of the Canadian Society for Mechanical Engineering. 44, 2, p. 263-271 9 p.

  研究成果: Article › 同行評審

  • Fasteners
  • Forging
  • Stress analysis
  • Welding
  • Stress concentration

• Effect of Electrode Route Motion on Electrode Wear in EDM Machining of Mold Steel

  Chen, D. C., Wang, Y. K. & Lin, G. F., 2013 十月, 於: Arabian Journal for Science and Engineering. 38, 10, p. 2793-2800 8 p.

  研究成果: Article › 同行評審

  • machining
  • routes
  • steels
  • electrodes
  • surface roughness
  2 引文 斯高帕斯（Scopus）

• Enhancement of extrusion die learning based on a simulation analysis

  Chen, D. C., You, C. S. & Liu, K. H., 2016 一月 1, 於: World Transactions on Engineering and Technology Education. 14, 2, p. 282-287 6 p.

  研究成果: Article › 同行評審

  • Extrusion dies
  • simulation
  • Students
  • learning
  • engineer

• FEM Analysis and Experiment Validation on Multi-Pass Forging of Torx Round Flange Bolt

  Lin, S. H., Chen, D. C., Chai, U. C. & Tzou, G. Y., 2020 十月 1, 於: International Journal of Automotive Technology. 21, 5, p. 1113-1119 7 p.

  研究成果: Article › 同行評審

  • Forging
  • Bolts
  • Flanges
  • Finite element method
  • Experiments

• Finite element analysis of chip breaker geometry in turning process

  Chen, D. C., You, C. S. & Kao, S. H., 2016 七月 1, 於: Advances in Mechanical Engineering. 8, 7, p. 1-10 10 p.

  研究成果: Article › 同行評審

  • Wear of materials
  • Cutting tools
  • Finite element method
  • Geometry
  • Aluminum alloys
  4 引文 斯高帕斯（Scopus）

• Finite element analysis of deep drawing

  Chen, D. C., Cheng-Yu, L. & Lai, Y. Y., 2019, 於: Advances in Mechanical Engineering. 11, 9

  研究成果: Article › 同行評審

  開啟存取

  • Deep drawing
  • Aluminum alloys
  • Plastic flow
  • Finite element method
  • Plastic deformation
  2 引文 斯高帕斯（Scopus）

• Forging process of bicycle chain wheel using experiment and finite element analysis

  Chen, D-C., Nian, F. L. & Chen, M. R., 2012 七月 2, 於: Advanced Science Letters. 9, p. 68-73 6 p.

  研究成果: Article › 同行評審

  • Forging
  • bicycle
  • Finite Element Analysis
  • Bicycles
  • Wheel

• Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy

  Chen, D. C. & You, C. S., 2015 一月 1, 於: Strength of Materials. 47, 1, p. 122-127 6 p.

  研究成果: Article › 同行評審

  • Aluminum alloys
  • Ductile fracture
  • Finite element method
  • Stamping
  • Forging
  1 引文 斯高帕斯（Scopus）

• Integration of meta-analysis, analytic hierarchy process, and Taguchi method to examine tool wear

  Chen, D. C., You, C. S. & Ting, J. C., 2018 九月 1, 於: Journal of Technology. 33, 3, p. 155-164 10 p.

  研究成果: Article › 同行評審

  • Taguchi methods
  • Analytic hierarchy process
  • Wear of materials
  • Cytokines
  • Cutting tools

• Investigation on fracture and conductivity of flex-on-film flexible bonding using anisotropic conductive film considering repeated bending

  Lin, C. M., Chen, D. C. & Liu, Y. C., 2019 八月 1, 於: Microsystem Technologies. 25, 8, p. 3017-3026 10 p.

  研究成果: Article › 同行評審

  • Conductive films
  • conductivity
  • Acoustic impedance
  • electrical resistance
  • Electrodes
  2 引文 斯高帕斯（Scopus）

• Optimization of the parameters for the rotary diamond dressing of grinding wheels

  Liu, C. C., Chen, D. C. & Kuo, T. Y., 2019 一月 1, 於: Smart Science. 7, 3, p. 184-188 5 p.

  研究成果: Article › 同行評審

  開啟存取

  • Grinding
  • Diamond
  • Grinding wheels
  • Wheel
  • Strombus or kite or diamond
  1 引文 斯高帕斯（Scopus）

• Slab analysis, FEM simulation and experimental verification on rotating forging of three-layer clad cylinder with constant shear friction

  Tzou, G. Y., Chen, D. C. & Lin, S. H., 2015 四月 3, 於: Advances in Materials and Processing Technologies. 1, 1-2, p. 223-233 11 p.

  研究成果: Article › 同行評審

  • Forging
  • Friction
  • Finite element method
  • Torque
  • Shear stress

• Study of 6061 Aluminum Alloy Thread Turning

  Chen, D. C., You, C. S. & Yu, M. J., 2017 二月 1, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 38, 1, p. 33-40 8 p.

  研究成果: Article › 同行評審

  • Aluminum alloys
  • Abrasion
  • Thread cutting
  • Cutting fluids
  • Cutting tools
  1 引文 斯高帕斯（Scopus）

• Study of membrane restrictors in hydrostatic bearing

  Chen, D. C., Chen, M. F., Pan, C. H. & Pan, J. Y., 2018 九月 1, 於: Advances in Mechanical Engineering. 10, 9

  研究成果: Article › 同行評審

  • Hydrostatic bearings
  • Membranes
  • Oils
  • Diaphragms
  • Feedback
  1 引文 斯高帕斯（Scopus）

• Study of piezoelectric materials combined with electromagnetic design for bicycle harvesting system

  Chen, D. C., Kao, S. H. & Huang, C. K., 2016 四月, 於: Advances in Mechanical Engineering. 8, 4, p. 1-11 11 p.

  研究成果: Article › 同行評審

  • Piezoelectric materials
  • Bicycles
  • Energy harvesting
  • Electric coils
  • Magnetoelectric effects

• Using an analytic hierarchy process to develop competencies on mould product creativity for vocational college students

  Chen, D-C., Chen, C. P., Lee, C. Y., You, C. S. & Jao, C. H., 2011 十二月 1, 於: World Transactions on Engineering and Technology Education. 9, 1, p. 54-59 6 p.

  研究成果: Article › 同行評審

  • vocational college
  • Textbooks
  • Analytic hierarchy process
  • creativity
  • Students
  4 引文 斯高帕斯（Scopus）

• Using the Taguchi method and finite element method to analyze a robust new design for titanium alloy prick hole extrusion

  Chen, D. C., You, C. S., Nian, F. L. & Guo, M. W., 2011 一月 1, 於: Procedia Engineering. 10, p. 82-87 6 p.

  研究成果: Article › 同行評審

  • Taguchi methods
  • Titanium alloys
  • Extrusion
  • Finite element method
  • Plastic deformation
  8 引文 斯高帕斯（Scopus）

• Vibration characteristics and modal analysis of a grinding machine

  Chen, D. C., Chen, M. F., Kang, J. H. & Lai, C. C., 2017 十二月 1, 於: Journal of Vibroengineering. 19, 8, p. 6288-6300 13 p.

  研究成果: Article › 同行評審

  • Grinding machines
  • Modal analysis
  • Spectrum analyzers
  • Finite element method
  • Machine design

• Warpage Analysis of a Plastic Spur Gear Injection Molding

  Chen, D. C., Huang, C. K. & Lin, J. W., 2017 十月 2, 於: Smart Science. 5, 4, p. 206-213 8 p.

  研究成果: Article › 同行評審

  • Injection Molding
  • Spur gears
  • Plastics
  • Injection molding
  • Trace
  3 引文 斯高帕斯（Scopus）

• 整合QFD, TRIZ及田口法研發破壞性創新之自行車鏈輪製程設計

  Chen, D-C., You, C. S., Ni, C. H. & Yu, M. J., 2016 一月 1, 於: International Journal of Systematic Innovation. 4, 1, p. 1-15 15 p.

  研究成果: Article › 同行評審

  • Bicycles
  • Quality Function Deployment (QFD)
  • Product development
  • Disruptive Innovation
  • Wheels
• Conference article

  Finite element simulation and analysis of saw cutting

  Chen, D. C., Chen, Y. H., You, C. S. & Huang, S. H., 2018 七月 31, 於: MATEC Web of Conferences. 185, 00021.

  研究成果: Conference article › 同行評審

  開啟存取

  • Sawing
  • Aluminum
  • Structural design
  • Wear of materials
  • Finite element method

• Generalized optimizations of two-stage forging of micro/meso copper fastener

  Lin, S. H., Chai, U. C., Tzou, G. Y. & Chen, D. C., 2018 七月 31, 於: MATEC Web of Conferences. 185, 00002.

  研究成果: Conference article › 同行評審

  開啟存取

  • Fasteners
  • Forging
  • Copper
  • Taguchi methods
  • Friction

• Investigation on Optimization of Baking in Sole Bonding Process

  Chen, D. C., Jin, H. W. & Su, J. Z., 2019 十月 24, 於: IOP Conference Series: Materials Science and Engineering. 644, 1, 012002.

  研究成果: Conference article › 同行評審

  開啟存取

  • Heating
  • Computer aided engineering
  • Hot Temperature
  • Industry
  • Temperature

• Multi-stage forging on torx-pin screw with high torque

  Tzou, G. Y., Chen, D. C. & Lin, S. H., 2017 八月 4, 於: MATEC Web of Conferences. 119, 01048.

  研究成果: Conference article › 同行評審

  • Forging
  • Torque
  • Finite element method
  • Needles
  • Friction
  1 引文 斯高帕斯（Scopus）

• Simulation analysis of turbine blade in 3D printing aquarium

  Chen, D. C., Lai, B. Y. & Gao, F. Y., 2017 九月 21, 於: MATEC Web of Conferences. 123, 00008.

  研究成果: Conference article › 同行評審

  • Turbomachine blades
  • Printing
  • Turbines
  • Stress analysis
  • Product design

• Study of Storage Shelves Deformation Using Finite Element Analysis during Seismic

  Chen, D. C. & Kuo, T. Y., 2018 四月 23, 於: MATEC Web of Conferences. 167, 03008.

  研究成果: Conference article › 同行評審

  • Finite element method
  • Earthquakes
  • Industry 4.0
  • Warehouses
  • Industry

• The effect of creative instruction on academic performance for mould manufacturing courses

  Chen, D. C., Lai, B. Y., Lee, C. Y. & Lai, G. Y., 2012 七月 27, 於: IEEE Global Engineering Education Conference, EDUCON. 6201085.

  研究成果: Conference article › 同行評審

  • Academic Performance
  • manufacturing
  • instruction
  • Manufacturing
  • performance
  1 引文 斯高帕斯（Scopus）
• Conference contribution

  Analysis of forging forming of 6061 aluminum alloy bicycle pedal

  Chen, D. C., Shiu, J. R., Nian, F. L. & Chen, M. R., 2013 一月 24, Frontiers of Manufacturing and Design Science III. PART 1 編輯 p. 31-35 5 p. (Applied Mechanics and Materials; 卷 271, 編號 PART 1).

  研究成果: Conference contribution

  • Bicycles
  • Forging
  • Aluminum alloys
  • Taguchi methods
  • Sports
  2 引文 斯高帕斯（Scopus）

• A study on the cellphone cover-forming process of titanium alloys using the finite element method

  Chen, D. C., Chen, M. R. & Nian, F. L., 2012, Frontiers of Manufacturing and Design Science II. p. 1550-1554 5 p. (Applied Mechanics and Materials; 卷 121-126).

  研究成果: Conference contribution

  • Titanium alloys
  • Finite element method
  • Stamping
  • Plastic deformation
  • Plastics

• A Study Regarding the Gap between the Industry and Academia Expectations for College Student's Employability

  Sui, F. M., Chang, J. C., Hsiao, H. C., Chen, S. C. & Chen, D. C., 2019 一月 9, 2018 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2018. IEEE Computer Society, p. 1573-1577 5 p. 8607269. (IEEE International Conference on Industrial Engineering and Engineering Management; 卷 2019-December).

  研究成果: Conference contribution

  • Employability
  • College Students
  • Students
  • Education
  • Word processing
  2 引文 斯高帕斯（Scopus）

• Design and surface roughness analysis of thin-sheet plastic injection forming

  Chen, D-C., Pan, J. Y., Gao, J. W. & Chen, W-J., 2013 八月 8, Intelligent Technologies and Engineering Systems. p. 743-753 11 p. (Lecture Notes in Electrical Engineering; 卷 234 LNEE).

  研究成果: Conference contribution

  • Plastic sheets
  • Surface roughness
  • Plastics
  • Plastic products
  • Plastics molding

• Developing the capability indicators for CNC machine R&D staff in Taiwan

  Chen, D. C. & Chen, T. W., 2018 一月 1, Innovative Technologies and Learning - First International Conference, ICITL 2018, Proceedings. Lin, L., Wu, T-T., Huang, Y-M., Huang, Y-M., Starcic, A. I. & Shadieva, R. (編輯). Springer Verlag, p. 223-230 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); 卷 11003 LNCS).

  研究成果: Conference contribution

  • Taiwan
  • Industry
  • Questionnaire
  • Wilcoxon Signed Rank Test
  • Skills

• Employability Table for Mechanical and Mechanical College Students in Science and Technology Colleges After Graduation: Analysis of Employability of Graduates and Employers

  Chen, D. C., Hsiao, H. C., Chang, J. C., Chen, S. C., Gao, Y. C., Guo, J. Y. & Chen, Y. H., 2019 一月 1, Innovative Technologies and Learning - 2nd International Conference, ICITL 2019, Proceedings. Rønningsbakk, L., Wu, T-T., Sandnes, F. E. & Huang, Y-M. (編輯). Springer, p. 836-846 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); 卷 11937 LNCS).

  研究成果: Conference contribution

  • Table
  • Students
  • Mechanical engineering
  • Performance
  • Self-assessment

• Enabling mlearning technologies into integrating off-campus internship and capstone courses for technological university in Taiwan

  Chen, S. C., Hsiao, H. C., Chang, J. C. & Chen, D. C., 2020, Proceedings of the 16th International Conference Mobile Learning 2020, ML 2020. IADIS, p. 135-137 3 p. (Proceedings of the 16th International Conference Mobile Learning 2020, ML 2020).

  研究成果: Conference contribution

  • Teaching
  • Design of experiments
  • Students
  • Experiments
  • Industry

• Finite element analysis and die design of extrusion processes of radial-finned heat sink

  Chen, D. C., Chen, J. M., Guo, M. W., Jao, C. H. & Chen, W. J., 2011, Advances in Materials and Processing Technologies II, AMPT 2009. p. 30-35 6 p. (Advanced Materials Research; 卷 264-265).

  研究成果: Conference contribution

  • Heat sinks
  • Extrusion
  • Extrusion dies
  • Finite element method
  • Friction

• Finite element analysis of advanced bicycle precision brake disk forming technology

  Chen, D. C., Kang, J. H. & Lai, C. C., 2015 八月 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (編輯). EDP Sciences, 12004. (MATEC Web of Conferences; 卷 21).

  研究成果: Conference contribution

  • Bicycles
  • Brakes
  • Finite element method
  • Modal analysis
  • Oils

• Finite element analysis of rim ring rolling forming of bicycle aluminum alloy

  Chen, D. C., Lai, B. Y. & You, C. S., 2012 二月 15, Materials and Manufacturing Technologies XIV. p. 231-236 6 p. (Advanced Materials Research; 卷 445).

  研究成果: Conference contribution

  • Bicycles
  • Aluminum alloys
  • Finite element method
  • Sports
  • Pollution

• Investigation into bicycle front fork forming process of simulation and experiment

  Chen, D. C. & Ku, W. H., 2015, Advances in Engineering Plasticity XII. Trans Tech Publications Ltd, p. 199-204 6 p. (Key Engineering Materials; 卷 626).

  研究成果: Conference contribution

  • Bicycles
  • Forging
  • titanium alloy (TiAl6V4)
  • Experiments
  • Taguchi methods

• Optimization analysis of A7075 bicycle stem forging process

  Chen, D. C., Shiu, J. R. & Lin, J. G., 2013, The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales. Trans Tech Publications Ltd, p. 227-233 7 p. (Key Engineering Materials; 卷 554-557).

  研究成果: Conference contribution

  • Bicycles
  • Forging
  • Taguchi methods
  • Structural analysis
  • Stress analysis
  1 引文 斯高帕斯（Scopus）

• Optimization design of parameters with hybrid particle swarm optimization algorithm in multi-hole extrusion process

  Chen, W-J., Chen, D-C., Su, W. C. & Nian, F. L., 2012 二月 2, Advances in Electronic Engineering, Communication and Management Vol. 2 - Proceedings of 2011 International Conference on Electronic Engineering, Communication and Management, EECM 2011. p. 279-284 6 p. (Lecture Notes in Electrical Engineering; 卷 140 LNEE).

  研究成果: Conference contribution

  • Extrusion
  • Particle swarm optimization (PSO)
  • Bending (forming)
  • Titanium alloys
  • Plastic deformation
  2 引文 斯高帕斯（Scopus）