尋找研究成果

在所有內容中搜尋

為 研究成果 進行篩選

搜尋概念
已選取的篩選器

出版年份

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

作者

  • Dyi-Cheng Chen
2011

Robust design of ring rolling process for titanium alloy using the Taguchi method and the finite element method

Chen, D. C., You, C. S., Guo, M. W. & Lai, B. Y., 2011 一月 1, Advanced Design and Manufacture III, ADM2010. Trans Tech Publications Ltd, p. 177-180 4 p. (Key Engineering Materials; 卷 450).

研究成果: Conference contribution

1 引文 斯高帕斯(Scopus)
2014

Analysis and experiment of 7075 aluminum alloy tensile test

Chen, D. C., You, C. S. & Gao, F. Y., 2014 一月 1, 於 : Procedia Engineering. 81, p. 1252-1258 7 p.

研究成果: Conference article

13 引文 斯高帕斯(Scopus)
2017

Optimum design of Si-Cr alloy springs for seismic vibration isolator

Chen, D. C., Kao, S. H., Chen, L. R., Wang, S. J., Chen, C. Y. & Huang, C. K., 2017 一月 1, Advances in Engineering Plasticity and its Application XIII. Yoshida, F. & Hamasaki, H. (編輯). Trans Tech Publications Ltd, p. 700-705 6 p. (Key Engineering Materials; 卷 725 KEM).

研究成果: Conference contribution

2016

Study on wire rod drawing process using the rotating die

Tzou, G. Y., Chen, D-C. & Lin, S. H., 2016 一月 1, Metal Forming 2016. Trans Tech Publications Ltd, 卷 716. p. 63-67 5 p. (Key Engineering Materials; 卷 716).

研究成果: Conference contribution

3 引文 斯高帕斯(Scopus)
2018

Study of Storage Shelves Deformation Using Finite Element Analysis during Seismic

Chen, D. C. & Kuo, T. Y., 2018 四月 23, 於 : MATEC Web of Conferences. 167, 03008.

研究成果: Conference article

2015

Study of 6061 aluminum alloy milling using four- blade face cutter

Chen, D-C., You, C. S., Tu, C. A. & Ni, C. H., 2015 一月 1, Materials and Technologies in Precision Machinery. Tzou, G-Y. (編輯). Trans Tech Publications Ltd, p. 62-68 7 p. (Key Engineering Materials; 卷 661).

研究成果: Conference contribution

2017

Vibration characteristics and modal analysis of a grinding machine

Chen, D. C., Chen, M. F., Kang, J. H. & Lai, C. C., 2017 十二月 1, 於 : Journal of Vibroengineering. 19, 8, p. 6288-6300 13 p.

研究成果: Article

2011
4 引文 斯高帕斯(Scopus)
2018

Finite element simulation and analysis of saw cutting

Chen, D. C., Chen, Y. H., You, C. S. & Huang, S. H., 2018 七月 31, 於 : MATEC Web of Conferences. 185, 00021.

研究成果: Conference article

開啟存取
2013
4 引文 斯高帕斯(Scopus)
2014

Analysis of insulating object plastic injection forming of bicycle dynamo hub power connector

Chen, D-C., Jao, C. H. & Huang, C. K., 2014 一月 1, Metal Forming 2014. Fratini, L. & Micari, F. (編輯). Trans Tech Publications Ltd, p. 791-797 7 p. (Key Engineering Materials; 卷 622-623).

研究成果: Conference contribution

2013

Design and surface roughness analysis of thin-sheet plastic injection forming

Chen, D-C., Pan, J. Y., Gao, J. W. & Chen, W-J., 2013 八月 8, Intelligent Technologies and Engineering Systems. p. 743-753 11 p. (Lecture Notes in Electrical Engineering; 卷 234 LNEE).

研究成果: Conference contribution

2018

Study of membrane restrictors in hydrostatic bearing

Chen, D. C., Chen, M. F., Pan, C. H. & Pan, J. Y., 2018 九月 1, 於 : Advances in Mechanical Engineering. 10, 9

研究成果: Article

1 引文 斯高帕斯(Scopus)

Strengthen entrepreneurial capacity in entrepreneurial competitions

Chen, S. C., Hsiao, H. C., Chang, J. C., Chou, C. M. & Chen, D. C., 2018 一月 1, Proceedings of the 15th International Conference on Cognition and Exploratory Learning in the Digital Age, CELDA 2018. Sampson, D. G., Sampson, D. G., Isaias, P., Ifenthaler, D., Ifenthaler, D. & Rodrigues, L. (編輯). IADIS Press, p. 363-366 4 p. (Proceedings of the 15th International Conference on Cognition and Exploratory Learning in the Digital Age, CELDA 2018).

研究成果: Conference contribution

2019

Employability Table for Mechanical and Mechanical College Students in Science and Technology Colleges After Graduation: Analysis of Employability of Graduates and Employers

Chen, D. C., Hsiao, H. C., Chang, J. C., Chen, S. C., Gao, Y. C., Guo, J. Y. & Chen, Y. H., 2019 一月 1, Innovative Technologies and Learning - 2nd International Conference, ICITL 2019, Proceedings. Rønningsbakk, L., Wu, T-T., Sandnes, F. E. & Huang, Y-M. (編輯). Springer, p. 836-846 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); 卷 11937 LNCS).

研究成果: Conference contribution

2012

Finite element analysis of rim ring rolling forming of bicycle aluminum alloy

Chen, D. C., Lai, B. Y. & You, C. S., 2012 二月 15, Materials and Manufacturing Technologies XIV. p. 231-236 6 p. (Advanced Materials Research; 卷 445).

研究成果: Conference contribution

Investigation into bicycle front fork forming process of simulation and experiment

Chen, D. C. & Ku, W. H., 2015 一月 1, Advances in Engineering Plasticity XII. Trans Tech Publications Ltd, p. 199-204 6 p. (Key Engineering Materials; 卷 626).

研究成果: Conference contribution

2018

Integration of meta-analysis, analytic hierarchy process, and Taguchi method to examine tool wear

Chen, D. C., You, C. S. & Ting, J. C., 2018 九月 1, 於 : Journal of Technology. 33, 3, p. 155-164 10 p.

研究成果: Article

2012

Optimization design of parameters with hybrid particle swarm optimization algorithm in multi-hole extrusion process

Chen, W-J., Chen, D-C., Su, W. C. & Nian, F. L., 2012 二月 2, Advances in Electronic Engineering, Communication and Management Vol. 2 - Proceedings of 2011 International Conference on Electronic Engineering, Communication and Management, EECM 2011. p. 279-284 6 p. (Lecture Notes in Electrical Engineering; 卷 140 LNEE).

研究成果: Conference contribution

2 引文 斯高帕斯(Scopus)
2017

Multi-stage forging on torx-pin screw with high torque

Tzou, G. Y., Chen, D. C. & Lin, S. H., 2017 八月 4, 於 : MATEC Web of Conferences. 119, 01048.

研究成果: Conference article

1 引文 斯高帕斯(Scopus)
2015
1 引文 斯高帕斯(Scopus)
2013

Optimization analysis of A7075 bicycle stem forging process

Chen, D. C., Shiu, J. R. & Lin, J. G., 2013 一月 1, The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales. Trans Tech Publications Ltd, p. 227-233 7 p. (Key Engineering Materials; 卷 554-557).

研究成果: Conference contribution

1 引文 斯高帕斯(Scopus)
2019

A Study Regarding the Gap between the Industry and Academia Expectations for College Student's Employability

Sui, F. M., Chang, J. C., Hsiao, H. C., Chen, S. C. & Chen, D. C., 2019 一月 9, 2018 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2018. IEEE Computer Society, p. 1573-1577 5 p. 8607269. (IEEE International Conference on Industrial Engineering and Engineering Management; 卷 2019-December).

研究成果: Conference contribution

2 引文 斯高帕斯(Scopus)
2018

Generalized optimizations of two-stage forging of micro/meso copper fastener

Lin, S. H., Chai, U. C., Tzou, G. Y. & Chen, D. C., 2018 七月 31, 於 : MATEC Web of Conferences. 185, 00002.

研究成果: Conference article

開啟存取
2020

FEM Analysis and Experiment Validation on Multi-Pass Forging of Torx Round Flange Bolt

Lin, S. H., Chen, D. C., Chai, U. C. & Tzou, G. Y., 2020 十月 1, 於 : International Journal of Automotive Technology. 21, 5, p. 1113-1119 7 p.

研究成果: Article

2012

Study of forging forming of 7075 aluminum alloy bicycle pedal

Chen, D. C., Nian, F. L., Shiu, J. R. & Ku, W. H., 2012 十一月 26, Advanced Manufacturing Focusing on Multi-Disciplinary Technologies. p. 101-108 8 p. (Advanced Materials Research; 卷 579).

研究成果: Conference contribution

1 引文 斯高帕斯(Scopus)
2018

Developing the capability indicators for CNC machine R&D staff in Taiwan

Chen, D. C. & Chen, T. W., 2018 一月 1, Innovative Technologies and Learning - First International Conference, ICITL 2018, Proceedings. Lin, L., Wu, T-T., Huang, Y-M., Huang, Y-M., Starcic, A. I. & Shadieva, R. (編輯). Springer Verlag, p. 223-230 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); 卷 11003 LNCS).

研究成果: Conference contribution

2014
3 引文 斯高帕斯(Scopus)
2020
開啟存取
2014

Finite element analysis and mold design of forging process of highway bicycle pedal

Chen, D. C., Chen, W. J., Hong, T. L., Chen, S. H., Lin, Y. X. & Tsai, M. J., 2014 一月 1, Advances in Materials and Processing Technologies XV. Trans Tech Publications Ltd, p. 63-69 7 p. (Materials Science Forum; 卷 773-774).

研究成果: Conference contribution

2019
2 引文 斯高帕斯(Scopus)
2013

Effect of Electrode Route Motion on Electrode Wear in EDM Machining of Mold Steel

Chen, D. C., Wang, Y. K. & Lin, G. F., 2013 十月, 於 : Arabian Journal for Science and Engineering. 38, 10, p. 2793-2800 8 p.

研究成果: Article

1 引文 斯高帕斯(Scopus)
2014
1 引文 斯高帕斯(Scopus)
2012

A study on the cellphone cover-forming process of titanium alloys using the finite element method

Chen, D-C., Chen, M. R. & Nian, F. L., 2012 一月 1, Frontiers of Manufacturing and Design Science II. p. 1550-1554 5 p. (Applied Mechanics and Materials; 卷 121-126).

研究成果: Conference contribution

2017
5 引文 斯高帕斯(Scopus)
2012
1 引文 斯高帕斯(Scopus)

Forging process of bicycle chain wheel using experiment and finite element analysis

Chen, D-C., Nian, F. L. & Chen, M. R., 2012 七月 2, 於 : Advanced Science Letters. 9, p. 68-73 6 p.

研究成果: Article

2014
2015

Finite element analysis of advanced bicycle precision brake disk forming technology

Chen, D. C., Kang, J. H. & Lai, C. C., 2015 八月 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (編輯). EDP Sciences, 12004. (MATEC Web of Conferences; 卷 21).

研究成果: Conference contribution

2011

Finite element analysis and die design of extrusion processes of radial-finned heat sink

Chen, D. C., Chen, J. M., Guo, M. W., Jao, C. H. & Chen, W. J., 2011 八月 8, Advances in Materials and Processing Technologies II, AMPT 2009. p. 30-35 6 p. (Advanced Materials Research; 卷 264-265).

研究成果: Conference contribution

2016

整合QFD, TRIZ及田口法研發破壞性創新之自行車鏈輪製程設計

Chen, D-C., You, C. S., Ni, C. H. & Yu, M. J., 2016 一月 1, 於 : International Journal of Systematic Innovation. 4, 1, p. 1-15 15 p.

研究成果: Article

2019

Optimization of the parameters for the rotary diamond dressing of grinding wheels

Liu, C. C., Chen, D. C. & Kuo, T. Y., 2019 一月 1, 於 : Smart Science. 7, 3, p. 184-188 5 p.

研究成果: Article

開啟存取
1 引文 斯高帕斯(Scopus)
2011
7 引文 斯高帕斯(Scopus)
2020
2014

Optimal Process Conditions for the Manufacture of Aluminum Alloy Bicycle Pedals

Chen, D-C., Lin, J. G., Ku, W. H. & Shiu, J. R., 2014 一月 1, 於 : Advances in Mechanical Engineering. 2014, 601253.

研究成果: Article

3 引文 斯高帕斯(Scopus)
2016

Enhancement of extrusion die learning based on a simulation analysis

Chen, D. C., You, C. S. & Liu, K. H., 2016 一月 1, 於 : World Transactions on Engineering and Technology Education. 14, 2, p. 282-287 6 p.

研究成果: Article

2017

Diamond shape division reversible data hiding in encrypted images

Huang, C. K., Chen, D. C., Liu, W. L. & Huang, S. C., 2017 十二月 1, 於 : ICIC Express Letters, Part B: Applications. 8, 12, p. 1559-1566 8 p.

研究成果: Article