尋找研究成果

搜尋結果

• 2011

  Diagnosis of ball screw preload loss by vibration signals through the Hilbert-Huang transform and multiscale measure

  Shin, Y. C., Huang, Y. C. & Chao, J. A., 2011, Information Technology for Manufacturing Systems II. p. 636-641 6 p. (Applied Mechanics and Materials; 卷 58-60).

  研究成果: Conference contribution

  • Ball screws
  • Mathematical transformations
  • Entropy
  • Machine tools
  • Decomposition
  4 引文 斯高帕斯（Scopus）

• Improved particle swarm optimization by updating constraints of PID control for real time linear motor positioning

  Li, Y. H., Huang, Y-C. & Chao, J. A., 2011 十二月 1, Communication Systems and Information Technology - Selected Papers from the 2011 International Conference on Electric and Electronics, EEIC 2011. VOL. 4 編輯 p. 515-523 9 p. (Lecture Notes in Electrical Engineering; 卷 100 LNEE, 編號 VOL. 4).

  研究成果: Conference contribution

  • Linear motors
  • Three term control systems
  • Particle swarm optimization (PSO)
  • Synchronous motors
  • Control systems

• Prognostic diagnosis of ball screw preload loss for machine tool through the Hilbert-Huang transform and multiscale entropy measure

  Huang, Y. C. & Chang, J. L., 2011 八月 1, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 32, 4, p. 349-358 10 p.

  研究成果: Article › 同行評審

  • Ball screws
  • Machine tools
  • Entropy
  • Decomposition
  • Torque motors
  1 引文 斯高帕斯（Scopus）
• 2012

  Development of a piezoelectric micro-cutting system

  Huang, Y-C. & Hsu, C. B., 2012 十二月 1, 於: Journal of Technology. 27, 4, p. 171-178 8 p.

  研究成果: Article › 同行評審

  • Microdissection
  • Ultrasonics
  • Tissue
  • Dissection
  • Enzymes

• Dynamic balancing modal analysis and vibration suppressing design for reciprocating compressor crankshaft

  Huang, Y. C. & Lee, F. Y., 2012, Mechatronics and Applied Mechanics. p. 996-999 4 p. (Applied Mechanics and Materials; 卷 157-158).

  研究成果: Conference contribution

  • Reciprocating compressors
  • Crankshafts
  • Modal analysis
  • Compressors
  • Connecting rods
  2 引文 斯高帕斯（Scopus）

• Numerical simulation and experimental study on bonding tool design of thermosonic transducer for Flip-Chip bonding

  Huang, Y. C. & Li, K. Y., 2012, Mechatronics and Applied Mechanics. p. 1670-1673 4 p. (Applied Mechanics and Materials; 卷 157-158).

  研究成果: Conference contribution

  • Transducers
  • Ultrasonic transducers
  • Computer simulation
  • Mountings
  • Light emitting diodes

• Theoretical and experimental design of a new flexible hinged positioning stage

  Huang, Y-C., Lee, C. Y. & Chen, C. R., 2012 二月 1, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 33, 1, p. 59-66 8 p.

  研究成果: Article › 同行評審

  • Hinges
  • Design of experiments
  • Natural frequencies
  • Piezoelectric actuators
  • Analysis of variance (ANOVA)
  3 引文 斯高帕斯（Scopus）
• 2013

  A quality monitoring online system using an early warning abnormal trend distribution: A thickness measurement case study using a LVDT

  Chuo, P. C., Huang, Y. C., Chiu, M. C. & Cheng, H. C., 2013, Materials, Mechatronics and Automation II. p. 120-127 8 p. (Advanced Materials Research; 卷 740).

  研究成果: Conference contribution

  • Thickness measurement
  • Online systems
  • Alarm systems
  • Monitoring
  • HTML

• Design and experiment of iterative learning controller based on particle swarm optimization approach with new bounded constraints technique

  Huang, Y. C., Li, Y. H. & Li, S. T., 2013 二月 20, Innovation for Applied Science and Technology. p. 2233-2237 5 p. (Applied Mechanics and Materials; 卷 284-287).

  研究成果: Conference contribution

  • Particle swarm optimization (PSO)
  • Controllers
  • Derivatives
  • Experiments
  • Linear motors
  2 引文 斯高帕斯（Scopus）

• Improved Particle Swarm Optimization by Updating Constraints of PID Control for Real Time Linear Motor Positioning

  Huang, Y. C. & Li, Y. H., 2013 八月 1, 於: Intelligent Automation and Soft Computing. 19, 3, p. 425-437 13 p.

  研究成果: Article › 同行評審

  • Linear Motor
  • PID Control
  • Particle Swarm Optimization
  • Positioning
  • Linear motors

• Precision motion of iterative learning controller using adaptive filter bandwidth tuning by improved particle swarm optimization technique

  Huang, Y-C., Li, S. T. & Peng, K. H., 2013 十月 22, Materials and Diverse Technologies in Industry and Manufacture. p. 349-353 5 p. (Applied Mechanics and Materials; 卷 376).

  研究成果: Conference contribution

  • Adaptive filters
  • Particle swarm optimization (PSO)
  • Tuning
  • Bandwidth
  • Controllers

• Prognostic diagnosis of hollow ball screw pretension on preload loss through sensed vibration signals

  Huang, Y. C., Chen, Y. S., Sun, S. L. & Peng, K. H., 2013 八月 8, Intelligent Technologies and Engineering Systems. p. 959-966 8 p. (Lecture Notes in Electrical Engineering; 卷 234 LNEE).

  研究成果: Conference contribution

  • Ball screws
  • Thermal effects
  • Cooling systems
  • Machine tools
  • Fast Fourier transforms
  1 引文 斯高帕斯（Scopus）

• Prognostic diagnosis of the preload loss for single nut ball screw through vibration signals

  Huang, Y. C. & Shin, Y. C., 2013 八月, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 34, 4, p. 303-311 9 p.

  研究成果: Article › 同行評審

  • Ball screws
  • Mathematical transformations
  • Entropy
  • Decomposition
  • Pattern matching

• Research of ear PPG signals compared with ECG signals by empirical mode decomposition and Hilbert-Huang transform

  Huang, Y. C. & Lin, C. S., 2013 四月 30, 於: Journal of Technology. 28, 1, p. 1-8 8 p.

  研究成果: Article › 同行評審

  • Electrocardiography
  • Decomposition
  • Mathematical transformations
  • Aging of materials
  • Health
  1 引文 斯高帕斯（Scopus）

• Simulation and experiment of langevin-type piezoelectric ultrasonic horn for micro tool motion

  Huang, Y. C., Ding, G. Z., Chen, B. H. & Huang, Y. J., 2013 八月 8, Intelligent Technologies and Engineering Systems. p. 967-974 8 p. (Lecture Notes in Electrical Engineering; 卷 234 LNEE).

  研究成果: Conference contribution

  • Piezoelectric transducers
  • Ultrasonics
  • Experiments
  • Vibrators
  • Harmonic analysis
  5 引文 斯高帕斯（Scopus）
• 2014

  Adaptive zero-phase filtering bandwidth of iterative learning control by particle swarm optimization

  Su, Y. W., Chao, J. A. & Huang, Y-C., 2014 一月 1, Proceedings of the 2nd International Conference on Intelligent Technologies and Engineering Systems, ICITES 2013. Chen, C-Y., Yang, C-F. & Juang, J. (編輯). Springer Verlag, p. 1031-1037 7 p. (Lecture Notes in Electrical Engineering; 卷 293).

  研究成果: Conference contribution

  • Particle swarm optimization (PSO)
  • Bandwidth
  • Butterworth filters
  • Error compensation
  • Controllers
  4 引文 斯高帕斯（Scopus）

• Ball nut preload diagnosis of the hollow ball screw through sensed current signals

  Huang, Y. C., Sun, S. L. & Peng, K. H., 2014, 於: International Journal of Automation and Smart Technology. 4, 3, p. 134-142 9 p.

  研究成果: Article › 同行評審

  • Ball screws
  • Entropy
  • Health
  • Cooling
  • Oils
  3 引文 斯高帕斯（Scopus）

• Dynamic motion and modal analysis simulation for the balance mass of the crankshaft of a two-cylinder reciprocating air compressor

  Huang, Y. C. & Lin, D. Y., 2014, Sensors, Mechatronics and Automation. p. 696-699 4 p. (Applied Mechanics and Materials; 卷 511-512).

  研究成果: Conference contribution

  • Crankshafts
  • Motion analysis
  • Modal analysis
  • Compressors
  • Reciprocating compressors

• Experiments of iterative learning control system using particle swarm optimization by new bounded constraints on velocity and positioning

  Huang, Y. C. & Li, Y. H., 2014, 於: Engineering Computations (Swansea, Wales). 31, 2, p. 250-266 17 p.

  研究成果: Article › 同行評審

  • Particle swarm optimization (PSO)
  • Control systems
  • Derivatives
  • Experiments
  • Controllers
  7 引文 斯高帕斯（Scopus）

• Study on Iterative Learning Control bandwidth tuning using particle swarm optimization technique for high precision motion

  Huang, Y-C. & Su, Y. W., 2014 十一月 5, Proceedings - 2014 International Conference on Information Science, Electronics and Electrical Engineering, ISEEE 2014. Li, S., Cheng, Y., Dai, Y. & Jiang, X. (編輯). Institute of Electrical and Electronics Engineers Inc., p. 2033-2037 5 p. 6946280. (Proceedings - 2014 International Conference on Information Science, Electronics and Electrical Engineering, ISEEE 2014; 卷 3).

  研究成果: Conference contribution

  • Particle swarm optimization (PSO)
  • Tuning
  • Bandwidth
  • Controllers
  • Butterworth filters
• 2016

  A new particle swarm optimization technique with iterative learning control for high precision motion

  Huang, Y. C. & Hsu, M. C., 2016, Applied System Innovation - Proceedings of the International Conference on Applied System Innovation, ICASI 2015. Meen, T-H., Prior, S. D. & Lam, A. D. K-T. (編輯). CRC Press/Balkema, p. 1081-1086 6 p. (Applied System Innovation - Proceedings of the International Conference on Applied System Innovation, ICASI 2015).

  研究成果: Conference contribution

  • Iterative Learning Control
  • Particle Swarm Optimization
  • Optimization Techniques
  • Particle swarm optimization (PSO)
  • Motion

• Prognostic diagnosis of the health status of an air-turbine dental handpiece rotor by using sound and vibration signals

  Yi-Cheng, H., Chang-Chih, L. & Po-Chou, C., 2016, 於: Journal of Vibroengineering. 18, 3, p. 1514-1524 11 p.

  研究成果: Article › 同行評審

  • Compressed air motors
  • Acoustic waves
  • Health
  • Rotors
  • Microphones
  1 引文 斯高帕斯（Scopus）
• 2018

  Diagnosis of the hollow ball screw preload classification using machine learning

  Huang, Y. C., Kao, C. H. & Chen, S. J., 2018 六月 30, 於: Applied Sciences (Switzerland). 8, 7, 1072.

  研究成果: Article › 同行評審

  • Ball screws
  • machine learning
  • screws
  • balls
  • hollow
  5 引文 斯高帕斯（Scopus）

• Numerical simulation and experimental validation of novel hyperelastic micro-motion manipulator for water conserving device

  Huang, Y. C. & Hsu, H. C., 2018 八月 1, 於: Microsystem Technologies. 24, 8, p. 3329-3339 11 p.

  研究成果: Article › 同行評審

  • manipulators
  • Manipulators
  • Water
  • inlet pressure
  • water pressure

• Numerical simulation and experimental validation of the vibration suppression control by using input shaping technique with extended Kalman filter

  Huang, Y. C., Lee, Y. L. & Ma, M. Y., 2018 一月 1, 於: Journal of Marine Science and Technology (Taiwan). 26, 5, p. 731-742 12 p.

  研究成果: Article › 同行評審

  • Kalman filter
  • Extended Kalman filters
  • vibration
  • Computer simulation
  • simulation
• 2019

  Anticipatory iterative learning control for linear motor positioning accuracy by use of hybrid particle swarm optimization

  Huang, Y. C., Hsu, S. W. & Ma, M. Y., 2019 一月 1, 於: Journal of Intelligent and Fuzzy Systems. 36, 2, p. 897-910 14 p.

  研究成果: Article › 同行評審

  • Linear Motor
  • Hybrid Optimization
  • Iterative Learning Control
  • Particle Swarm Optimization
  • Positioning

• Computed tomography system for total knee replacement planning and comparison with plain radiography measured by an orthopedic surgeon

  Huang, Y. J., Huang, Y. C., Wang, S. C. & Ku, M. C., 2019 一月 1, 於: Journal of Imaging Science and Technology. 63, 5, 050503.

  研究成果: Article › 同行評審

  • Knee prostheses
  • surgeons
  • orthopedics
  • Radiography
  • Orthopedics

• Labeling confidence values for wafer-handling robot arm performance using a feature-based general regression neural network and genetic algorithm

  Huang, Y. C., Yang, Z. S. & Liao, H. S., 2019 十月 1, 於: Applied Sciences (Switzerland). 9, 20, 4241.

  研究成果: Article › 同行評審

  開啟存取

  • robot arms
  • genetic algorithms
  • marking
  • regression analysis
  • Labeling

• Numerical simulation and experimental validation of heat sinks fabricated using selective laser melting for use in a compact LED recessed downlight

  Huang, Y. C. & Hsu, H. C., 2019 一月 9, 於: Microsystem Technologies. 25, 1, p. 121-137 17 p.

  研究成果: Article › 同行評審

  • Selective laser melting
  • heat sinks
  • Heat sinks
  • Light emitting diodes
  • light emitting diodes
  2 引文 斯高帕斯（Scopus）

• Wearable sensor for measurement of gait walking and running motion

  Huang, Y. C., Chen, Y. R., Wu, H. Y. & Huang, Y. J., 2019, 於: Sensors and Materials. 31, 2, p. 629-644 16 p.

  研究成果: Article › 同行評審

  開啟存取

  • gait
  • walking
  • Wearable sensors
  • pitch (inclination)
  • yaw
  1 引文 斯高帕斯（Scopus）
• 2020

  Selective laser melting heat sinks under jet impingement cooling for heat dissipation of higher light output LED lighting in a limited space

  Huang, Y-C. & Hsu, H-C., 2020, 於: Applied Sciences (Switzerland). 10, 11

  研究成果: Article › 同行評審