Abstract
In this paper, we propose a novel design of a UMTS diplexer using combined coplanar waveguide (CPW) and microstrip. The diplexer is composed of two bandpass filters, which termed as the Tx- and Rx-filter. The filter is composed of the lumped elements implemented by the CPW and microstrip structures. Zero has been implanted in each filter design for increasing the isolation between the Rx- and Tx-port. The two filters are connected in a parallel-cascade configuration. The microstrip is used to couple signals from/to the filters.
Original language | English |
---|---|
Title of host publication | TENCON 2007 - 2007 IEEE Region 10 Conference |
DOIs | |
Publication status | Published - 2007 Dec 1 |
Event | IEEE Region 10 Conference, TENCON 2007 - Taipei, Taiwan Duration: 2007 Oct 30 → 2007 Nov 2 |
Publication series
Name | IEEE Region 10 Annual International Conference, Proceedings/TENCON |
---|
Other
Other | IEEE Region 10 Conference, TENCON 2007 |
---|---|
Country | Taiwan |
City | Taipei |
Period | 07-10-30 → 07-11-02 |
Fingerprint
All Science Journal Classification (ASJC) codes
- Computer Science Applications
- Electrical and Electronic Engineering
Cite this
}
UMTS diplexer design using combined coplanar waveguide and microstrip. / Xu, Wei Qin; Ho, Min Hua.
TENCON 2007 - 2007 IEEE Region 10 Conference. 2007. 4428793 (IEEE Region 10 Annual International Conference, Proceedings/TENCON).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
TY - GEN
T1 - UMTS diplexer design using combined coplanar waveguide and microstrip
AU - Xu, Wei Qin
AU - Ho, Min Hua
PY - 2007/12/1
Y1 - 2007/12/1
N2 - In this paper, we propose a novel design of a UMTS diplexer using combined coplanar waveguide (CPW) and microstrip. The diplexer is composed of two bandpass filters, which termed as the Tx- and Rx-filter. The filter is composed of the lumped elements implemented by the CPW and microstrip structures. Zero has been implanted in each filter design for increasing the isolation between the Rx- and Tx-port. The two filters are connected in a parallel-cascade configuration. The microstrip is used to couple signals from/to the filters.
AB - In this paper, we propose a novel design of a UMTS diplexer using combined coplanar waveguide (CPW) and microstrip. The diplexer is composed of two bandpass filters, which termed as the Tx- and Rx-filter. The filter is composed of the lumped elements implemented by the CPW and microstrip structures. Zero has been implanted in each filter design for increasing the isolation between the Rx- and Tx-port. The two filters are connected in a parallel-cascade configuration. The microstrip is used to couple signals from/to the filters.
UR - http://www.scopus.com/inward/record.url?scp=48649107493&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=48649107493&partnerID=8YFLogxK
U2 - 10.1109/TENCON.2007.4428793
DO - 10.1109/TENCON.2007.4428793
M3 - Conference contribution
AN - SCOPUS:48649107493
SN - 1424412722
SN - 9781424412723
T3 - IEEE Region 10 Annual International Conference, Proceedings/TENCON
BT - TENCON 2007 - 2007 IEEE Region 10 Conference
ER -