Suspended substrate stripline bandpass filters with source-load coupling structure using lumped and full-wave mixed approach

Min Hua Ho, P. F. Chen

Research output: Contribution to journalArticle

18 Citations (Scopus)

Abstract

This paper presents the design of two suspended substrate stripline (SSS) bandpass filters (BPFs), both with a source-load coupling structure embedded to create a transmission zero (TZ) near each side of the passband edges. For the first BPF, the physical circuit layout is proposed first and followed by the establishment of an equivalent LC circuit. The optimization of element values of the LC circuit using a circuit-level simulator leads to quick adjustment of the structural parameters of the physical circuit layout with the aid of a full-wave simulator. For the second BPF, the ingenious equivalent LC circuit modified from that of the first one is proposed for bandwidth enhancement, which is achieved by exciting two extra loaded resonances in the passband. With the element values of the LC circuit optimized, proper reshaping the physical circuit layout from that of the first BPF is easily accomplished. The presented lumped and full-wave mixed approach is very efficient in that the circuit- level simulator is used to the largest extent and the time-consuming full-wave simulator is employed only at the later stage of the design. Experiments are conducted to verify the design of the two SSS BPFs and agreements are observed between the measured and simulated data.

Original languageEnglish
Pages (from-to)519-535
Number of pages17
JournalProgress in Electromagnetics Research
Volume122
DOIs
Publication statusPublished - 2012 Jan 1

Fingerprint

LC circuits
Bandpass filters
bandpass filters
simulators
Integrated circuit layout
Networks (circuits)
layouts
Substrates
Simulators
equivalent circuits
adjusting
bandwidth
optimization
augmentation
Bandwidth
Experiments

All Science Journal Classification (ASJC) codes

  • Radiation
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Cite this

@article{2c91351aaad24826a644e5df23af5ce0,
title = "Suspended substrate stripline bandpass filters with source-load coupling structure using lumped and full-wave mixed approach",
abstract = "This paper presents the design of two suspended substrate stripline (SSS) bandpass filters (BPFs), both with a source-load coupling structure embedded to create a transmission zero (TZ) near each side of the passband edges. For the first BPF, the physical circuit layout is proposed first and followed by the establishment of an equivalent LC circuit. The optimization of element values of the LC circuit using a circuit-level simulator leads to quick adjustment of the structural parameters of the physical circuit layout with the aid of a full-wave simulator. For the second BPF, the ingenious equivalent LC circuit modified from that of the first one is proposed for bandwidth enhancement, which is achieved by exciting two extra loaded resonances in the passband. With the element values of the LC circuit optimized, proper reshaping the physical circuit layout from that of the first BPF is easily accomplished. The presented lumped and full-wave mixed approach is very efficient in that the circuit- level simulator is used to the largest extent and the time-consuming full-wave simulator is employed only at the later stage of the design. Experiments are conducted to verify the design of the two SSS BPFs and agreements are observed between the measured and simulated data.",
author = "Ho, {Min Hua} and Chen, {P. F.}",
year = "2012",
month = "1",
day = "1",
doi = "10.2528/PIER11102502",
language = "English",
volume = "122",
pages = "519--535",
journal = "Progress in Electromagnetics Research",
issn = "1070-4698",
publisher = "Electromagnetics Academy",

}

TY - JOUR

T1 - Suspended substrate stripline bandpass filters with source-load coupling structure using lumped and full-wave mixed approach

AU - Ho, Min Hua

AU - Chen, P. F.

PY - 2012/1/1

Y1 - 2012/1/1

N2 - This paper presents the design of two suspended substrate stripline (SSS) bandpass filters (BPFs), both with a source-load coupling structure embedded to create a transmission zero (TZ) near each side of the passband edges. For the first BPF, the physical circuit layout is proposed first and followed by the establishment of an equivalent LC circuit. The optimization of element values of the LC circuit using a circuit-level simulator leads to quick adjustment of the structural parameters of the physical circuit layout with the aid of a full-wave simulator. For the second BPF, the ingenious equivalent LC circuit modified from that of the first one is proposed for bandwidth enhancement, which is achieved by exciting two extra loaded resonances in the passband. With the element values of the LC circuit optimized, proper reshaping the physical circuit layout from that of the first BPF is easily accomplished. The presented lumped and full-wave mixed approach is very efficient in that the circuit- level simulator is used to the largest extent and the time-consuming full-wave simulator is employed only at the later stage of the design. Experiments are conducted to verify the design of the two SSS BPFs and agreements are observed between the measured and simulated data.

AB - This paper presents the design of two suspended substrate stripline (SSS) bandpass filters (BPFs), both with a source-load coupling structure embedded to create a transmission zero (TZ) near each side of the passband edges. For the first BPF, the physical circuit layout is proposed first and followed by the establishment of an equivalent LC circuit. The optimization of element values of the LC circuit using a circuit-level simulator leads to quick adjustment of the structural parameters of the physical circuit layout with the aid of a full-wave simulator. For the second BPF, the ingenious equivalent LC circuit modified from that of the first one is proposed for bandwidth enhancement, which is achieved by exciting two extra loaded resonances in the passband. With the element values of the LC circuit optimized, proper reshaping the physical circuit layout from that of the first BPF is easily accomplished. The presented lumped and full-wave mixed approach is very efficient in that the circuit- level simulator is used to the largest extent and the time-consuming full-wave simulator is employed only at the later stage of the design. Experiments are conducted to verify the design of the two SSS BPFs and agreements are observed between the measured and simulated data.

UR - http://www.scopus.com/inward/record.url?scp=84863281671&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863281671&partnerID=8YFLogxK

U2 - 10.2528/PIER11102502

DO - 10.2528/PIER11102502

M3 - Article

AN - SCOPUS:84863281671

VL - 122

SP - 519

EP - 535

JO - Progress in Electromagnetics Research

JF - Progress in Electromagnetics Research

SN - 1070-4698

ER -