Abstract
A bandpass filter (BPF) using CPW combined with microstrip is proposed. The target BPF is composed of two element filters built from combined CPW and microstrip structure. The design of element filter is based on the lumped elements approach with each circuit component built from a CPW or microstrip. In the circuit model, transmission zeros are created by the passband edges to enhance the signal selectivity. The element filter's characteristics are analyzed by the lumped L-C circuit model. Experiment is conducted, and a good agreement is observed between the measurement and simulation.
| Original language | English |
|---|---|
| Pages (from-to) | 59-66 |
| Number of pages | 8 |
| Journal | Progress In Electromagnetics Research Letters |
| Volume | 9 |
| DOIs | |
| Publication status | Published - 2009 Jan 1 |
Fingerprint
All Science Journal Classification (ASJC) codes
- Electronic, Optical and Magnetic Materials
Cite this
}
Quasi-lumped design of bandpass filter using combined CPW and microstrip. / Chen, M.; Lin, Y. C.; Ho, Min-Hua.
In: Progress In Electromagnetics Research Letters, Vol. 9, 01.01.2009, p. 59-66.Research output: Contribution to journal › Article
TY - JOUR
T1 - Quasi-lumped design of bandpass filter using combined CPW and microstrip
AU - Chen, M.
AU - Lin, Y. C.
AU - Ho, Min-Hua
PY - 2009/1/1
Y1 - 2009/1/1
N2 - A bandpass filter (BPF) using CPW combined with microstrip is proposed. The target BPF is composed of two element filters built from combined CPW and microstrip structure. The design of element filter is based on the lumped elements approach with each circuit component built from a CPW or microstrip. In the circuit model, transmission zeros are created by the passband edges to enhance the signal selectivity. The element filter's characteristics are analyzed by the lumped L-C circuit model. Experiment is conducted, and a good agreement is observed between the measurement and simulation.
AB - A bandpass filter (BPF) using CPW combined with microstrip is proposed. The target BPF is composed of two element filters built from combined CPW and microstrip structure. The design of element filter is based on the lumped elements approach with each circuit component built from a CPW or microstrip. In the circuit model, transmission zeros are created by the passband edges to enhance the signal selectivity. The element filter's characteristics are analyzed by the lumped L-C circuit model. Experiment is conducted, and a good agreement is observed between the measurement and simulation.
UR - http://www.scopus.com/inward/record.url?scp=75449096265&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=75449096265&partnerID=8YFLogxK
U2 - 10.2528/PIERL09042201
DO - 10.2528/PIERL09042201
M3 - Article
AN - SCOPUS:75449096265
VL - 9
SP - 59
EP - 66
JO - Progress In Electromagnetics Research Letters
JF - Progress In Electromagnetics Research Letters
SN - 1937-6480
ER -