Abstract
The integrated antenna pair gains (G a's), as a function of separations in several indoor and outdoor environments for communication over air at antenna heights above ground ranging between 4.5 cm to 85 cm, were reported. All antennas were fabricated using a single aluminum layer on a 3-μm thick oxide layer on 20-ω-cm silicon substrates with no passivation. Two mobile wafer probe stands have been constructed using Delrin which is a type of plastic, to evaluate characteristics of integrated antennas as a function of separations in realistic environments. A monolithically integrated true single chip radio (μNode) which incorporates a transceiver, a digital processor, a sensor and a power source was proposed.
| Original language | English |
|---|---|
| Pages (from-to) | 1611-1614 |
| Number of pages | 4 |
| Journal | IEEE Antennas and Propagation Society, AP-S International Symposium (Digest) |
| Volume | 2 |
| Publication status | Published - 2004 Oct 4 |
| Event | IEEE Antennas and Propagation Society Symposium 2004 Digest held in Conjunction with: USNC/URSI National Radio Science Meeting - Monterey, CA, United States Duration: 2004 Jun 20 → 2004 Jun 25 |
Fingerprint
All Science Journal Classification (ASJC) codes
- Electrical and Electronic Engineering
Cite this
}
Power transmission gain measurements of integrated antenna pairs in indoor and outdoor environments. / Lin, Jau-Jr/jau Jr/jau; Guo, Xiaoling; Li, Ran; Brewer, Joe E.; O, Kenneth K.
In: IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), Vol. 2, 04.10.2004, p. 1611-1614.Research output: Contribution to journal › Conference article
TY - JOUR
T1 - Power transmission gain measurements of integrated antenna pairs in indoor and outdoor environments
AU - Lin, Jau-Jr/jau Jr/jau
AU - Guo, Xiaoling
AU - Li, Ran
AU - Brewer, Joe E.
AU - O, Kenneth K.
PY - 2004/10/4
Y1 - 2004/10/4
N2 - The integrated antenna pair gains (G a's), as a function of separations in several indoor and outdoor environments for communication over air at antenna heights above ground ranging between 4.5 cm to 85 cm, were reported. All antennas were fabricated using a single aluminum layer on a 3-μm thick oxide layer on 20-ω-cm silicon substrates with no passivation. Two mobile wafer probe stands have been constructed using Delrin which is a type of plastic, to evaluate characteristics of integrated antennas as a function of separations in realistic environments. A monolithically integrated true single chip radio (μNode) which incorporates a transceiver, a digital processor, a sensor and a power source was proposed.
AB - The integrated antenna pair gains (G a's), as a function of separations in several indoor and outdoor environments for communication over air at antenna heights above ground ranging between 4.5 cm to 85 cm, were reported. All antennas were fabricated using a single aluminum layer on a 3-μm thick oxide layer on 20-ω-cm silicon substrates with no passivation. Two mobile wafer probe stands have been constructed using Delrin which is a type of plastic, to evaluate characteristics of integrated antennas as a function of separations in realistic environments. A monolithically integrated true single chip radio (μNode) which incorporates a transceiver, a digital processor, a sensor and a power source was proposed.
UR - http://www.scopus.com/inward/record.url?scp=4644232924&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=4644232924&partnerID=8YFLogxK
M3 - Conference article
AN - SCOPUS:4644232924
VL - 2
SP - 1611
EP - 1614
JO - AP-S International Symposium (Digest) (IEEE Antennas and Propagation Society)
JF - AP-S International Symposium (Digest) (IEEE Antennas and Propagation Society)
SN - 0272-4693
ER -