Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy

D. C. Chen, C. S. You

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

True stress-strain values were obtained from the tensile tests of 7075 aluminum alloy and finite element analysis. The results revealed that different ductile fracture criteria resulted in different accuracy of analysis. Moreover, factors affecting ductile fracture, such as effective stress, effective strain, and damage were analyzed. The maximum damage level occurred in the center, with its value reaching 0.454. The break happened in 12.9 s in the P1 point. In the P3 point, fracture was not revealed. It can be seen that the maximum damage was observed over the fracture area in the P1 point. Finite element analysis as applied to the 7075 aluminum alloy fracture criteria can be used for forging, drawing, and stamping of the materials.

Original languageEnglish
Pages (from-to)122-127
Number of pages6
JournalStrength of Materials
Volume47
Issue number1
DOIs
Publication statusPublished - 2015 Jan 1

Fingerprint

Aluminum alloys
Ductile fracture
Finite element method
Stamping
Forging

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials

Cite this

@article{c0bfa32f24bd4d89830e9582e6510a7f,
title = "Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy",
abstract = "True stress-strain values were obtained from the tensile tests of 7075 aluminum alloy and finite element analysis. The results revealed that different ductile fracture criteria resulted in different accuracy of analysis. Moreover, factors affecting ductile fracture, such as effective stress, effective strain, and damage were analyzed. The maximum damage level occurred in the center, with its value reaching 0.454. The break happened in 12.9 s in the P1 point. In the P3 point, fracture was not revealed. It can be seen that the maximum damage was observed over the fracture area in the P1 point. Finite element analysis as applied to the 7075 aluminum alloy fracture criteria can be used for forging, drawing, and stamping of the materials.",
author = "Chen, {D. C.} and You, {C. S.}",
year = "2015",
month = "1",
day = "1",
doi = "10.1007/s11223-015-9637-z",
language = "English",
volume = "47",
pages = "122--127",
journal = "Strength of Materials",
issn = "0039-2316",
publisher = "Springer New York",
number = "1",

}

Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy. / Chen, D. C.; You, C. S.

In: Strength of Materials, Vol. 47, No. 1, 01.01.2015, p. 122-127.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy

AU - Chen, D. C.

AU - You, C. S.

PY - 2015/1/1

Y1 - 2015/1/1

N2 - True stress-strain values were obtained from the tensile tests of 7075 aluminum alloy and finite element analysis. The results revealed that different ductile fracture criteria resulted in different accuracy of analysis. Moreover, factors affecting ductile fracture, such as effective stress, effective strain, and damage were analyzed. The maximum damage level occurred in the center, with its value reaching 0.454. The break happened in 12.9 s in the P1 point. In the P3 point, fracture was not revealed. It can be seen that the maximum damage was observed over the fracture area in the P1 point. Finite element analysis as applied to the 7075 aluminum alloy fracture criteria can be used for forging, drawing, and stamping of the materials.

AB - True stress-strain values were obtained from the tensile tests of 7075 aluminum alloy and finite element analysis. The results revealed that different ductile fracture criteria resulted in different accuracy of analysis. Moreover, factors affecting ductile fracture, such as effective stress, effective strain, and damage were analyzed. The maximum damage level occurred in the center, with its value reaching 0.454. The break happened in 12.9 s in the P1 point. In the P3 point, fracture was not revealed. It can be seen that the maximum damage was observed over the fracture area in the P1 point. Finite element analysis as applied to the 7075 aluminum alloy fracture criteria can be used for forging, drawing, and stamping of the materials.

UR - http://www.scopus.com/inward/record.url?scp=84953352577&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84953352577&partnerID=8YFLogxK

U2 - 10.1007/s11223-015-9637-z

DO - 10.1007/s11223-015-9637-z

M3 - Article

AN - SCOPUS:84953352577

VL - 47

SP - 122

EP - 127

JO - Strength of Materials

JF - Strength of Materials

SN - 0039-2316

IS - 1

ER -