Abstract
The design of an annular-ring microstrip antennas for circular polarization (CP) was discussed. For obtaining the CP operation of the annular-strip microstrip antenna, two orthogonal modes with equal amplitude and 90° phase difference were excited simultaneously. In order to excite orthogonal modes, a L-shaped strip was placed between inside the annular ring and its two ends were connected to the orthogonal modes of the inner boundary of the annular ring patch. The resonant frequency of x-polarized mode was higher than that of y-polarized mode, and thus a right-handed CP operation was obtained. The axial ratio of the CP radiation was also measured in the broadside direction.
| Original language | English |
|---|---|
| Pages (from-to) | 471-474 |
| Number of pages | 4 |
| Journal | IEEE Antennas and Propagation Society, AP-S International Symposium (Digest) |
| Volume | 1 |
| Publication status | Published - 2004 Sep 29 |
| Event | IEEE Antennas and Propagation Society Symposium 2004 Digest held in Conjunction with: USNC/URSI National Radio Science Meeting - Monterey, CA, United States Duration: 2004 Jun 20 → 2004 Jun 25 |
Fingerprint
All Science Journal Classification (ASJC) codes
- Electrical and Electronic Engineering
Cite this
}
Design of an annular-ring microstrip antenna for circular polarization. / Sim, Chow Yen Desmond; Lin, Kuang Woei; Row, Jeen-Sheen.
In: IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), Vol. 1, 29.09.2004, p. 471-474.Research output: Contribution to journal › Conference article
TY - JOUR
T1 - Design of an annular-ring microstrip antenna for circular polarization
AU - Sim, Chow Yen Desmond
AU - Lin, Kuang Woei
AU - Row, Jeen-Sheen
PY - 2004/9/29
Y1 - 2004/9/29
N2 - The design of an annular-ring microstrip antennas for circular polarization (CP) was discussed. For obtaining the CP operation of the annular-strip microstrip antenna, two orthogonal modes with equal amplitude and 90° phase difference were excited simultaneously. In order to excite orthogonal modes, a L-shaped strip was placed between inside the annular ring and its two ends were connected to the orthogonal modes of the inner boundary of the annular ring patch. The resonant frequency of x-polarized mode was higher than that of y-polarized mode, and thus a right-handed CP operation was obtained. The axial ratio of the CP radiation was also measured in the broadside direction.
AB - The design of an annular-ring microstrip antennas for circular polarization (CP) was discussed. For obtaining the CP operation of the annular-strip microstrip antenna, two orthogonal modes with equal amplitude and 90° phase difference were excited simultaneously. In order to excite orthogonal modes, a L-shaped strip was placed between inside the annular ring and its two ends were connected to the orthogonal modes of the inner boundary of the annular ring patch. The resonant frequency of x-polarized mode was higher than that of y-polarized mode, and thus a right-handed CP operation was obtained. The axial ratio of the CP radiation was also measured in the broadside direction.
UR - http://www.scopus.com/inward/record.url?scp=4544353746&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=4544353746&partnerID=8YFLogxK
M3 - Conference article
AN - SCOPUS:4544353746
VL - 1
SP - 471
EP - 474
JO - AP-S International Symposium (Digest) (IEEE Antennas and Propagation Society)
JF - AP-S International Symposium (Digest) (IEEE Antennas and Propagation Society)
SN - 0272-4693
ER -