Design and implementation of a sensorless PMSM drive including standstill starting

Der Fa Chen, Tian Hua Liu, Che Kai Hung

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Abstract

The paper proposes a novel sensorless PMSM system, driven by a matrix converter. In this paper, first, a standstill starting technique is proposed. Then, a flux/rotor position estimating technique is proposed to obtain the shaft angle of the motor and achieve a closed-loop system. Finally, a 32-bit TMS320C40 digital signal processor is used to execute the starting and sensorless techniques, and all of the control loops, including a current-loop and a speed-loop. Several experimental results are shown to validate the theoretical analysis.

Original languageEnglish
Title of host publicationIECON 2004 - 30th Annual Conference of IEEE Industrial Electronics Society
Pages987-992
Number of pages6
Volume1
Publication statusPublished - 2004 Dec 1
EventIECON 2004 - 30th Annual Conference of IEEE Industrial Electronics Society - Busan, Korea, Republic of
Duration: 2004 Nov 22004 Nov 6

Other

OtherIECON 2004 - 30th Annual Conference of IEEE Industrial Electronics Society
CountryKorea, Republic of
CityBusan
Period04-11-0204-11-06

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

Chen, D. F., Liu, T. H., & Hung, C. K. (2004). Design and implementation of a sensorless PMSM drive including standstill starting. In IECON 2004 - 30th Annual Conference of IEEE Industrial Electronics Society (Vol. 1, pp. 987-992)