Analysis of the harmonics losses and bearing load for motorized high speed spindle part I: Modeling

Shih Chang Chen, Yu-Lin Juan, Chia Hui Tang, Ching Feng Chang, Tsair Rong Chen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

Angular contact bearings are the most popular type of bearings used in the motorized high speed spindle. An initial preload and operating-induced load control are managed to ensure its rigidity, but the centrifugal force and temperature will rise with the rapid increase of spindle speed. Although the centrifugal force and thermo induced bearings load are applied on the spindle assembly. This paper aims to study innovative structure solution of spindle and develop a new type of super precision bearings which will ensure the lifetime and high performance of spindle. Section II proposed an improved inverter output filter, for pulsewidth modulated (PWM) drive system. The proposed filter is shown to effectively reduce the power losses in the spindle. This usage of the filter can improve lifetime of bearings and gain a higher output power of the spindle. The simulations show a 20 KW, 400 Hz PWM drive system with total loss reduced 13.36%, and a 20KW, 800HZ PWM drive system with total loss reduced 15.77%. Therefore, the filter configuration is an excellent contribution for PWM drive system.

Original languageEnglish
Title of host publicationIEEM2010 - IEEE International Conference on Industrial Engineering and Engineering Management
Pages772-777
Number of pages6
DOIs
Publication statusPublished - 2010 Dec 1
EventIEEE International Conference on Industrial Engineering and Engineering Management, IEEM2010 - Macao, China
Duration: 2010 Dec 72010 Dec 10

Other

OtherIEEE International Conference on Industrial Engineering and Engineering Management, IEEM2010
CountryChina
CityMacao
Period10-12-0710-12-10

Fingerprint

Bearings (structural)
Rigidity

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering

Cite this

Chen, S. C., Juan, Y-L., Tang, C. H., Chang, C. F., & Chen, T. R. (2010). Analysis of the harmonics losses and bearing load for motorized high speed spindle part I: Modeling. In IEEM2010 - IEEE International Conference on Industrial Engineering and Engineering Management (pp. 772-777). [5675604] https://doi.org/10.1109/IEEM.2010.5675604
Chen, Shih Chang ; Juan, Yu-Lin ; Tang, Chia Hui ; Chang, Ching Feng ; Chen, Tsair Rong. / Analysis of the harmonics losses and bearing load for motorized high speed spindle part I : Modeling. IEEM2010 - IEEE International Conference on Industrial Engineering and Engineering Management. 2010. pp. 772-777
@inproceedings{3a7b8831d3b14614858a643c5fb94d3f,
title = "Analysis of the harmonics losses and bearing load for motorized high speed spindle part I: Modeling",
abstract = "Angular contact bearings are the most popular type of bearings used in the motorized high speed spindle. An initial preload and operating-induced load control are managed to ensure its rigidity, but the centrifugal force and temperature will rise with the rapid increase of spindle speed. Although the centrifugal force and thermo induced bearings load are applied on the spindle assembly. This paper aims to study innovative structure solution of spindle and develop a new type of super precision bearings which will ensure the lifetime and high performance of spindle. Section II proposed an improved inverter output filter, for pulsewidth modulated (PWM) drive system. The proposed filter is shown to effectively reduce the power losses in the spindle. This usage of the filter can improve lifetime of bearings and gain a higher output power of the spindle. The simulations show a 20 KW, 400 Hz PWM drive system with total loss reduced 13.36{\%}, and a 20KW, 800HZ PWM drive system with total loss reduced 15.77{\%}. Therefore, the filter configuration is an excellent contribution for PWM drive system.",
author = "Chen, {Shih Chang} and Yu-Lin Juan and Tang, {Chia Hui} and Chang, {Ching Feng} and Chen, {Tsair Rong}",
year = "2010",
month = "12",
day = "1",
doi = "10.1109/IEEM.2010.5675604",
language = "English",
isbn = "9781424485031",
pages = "772--777",
booktitle = "IEEM2010 - IEEE International Conference on Industrial Engineering and Engineering Management",

}

Chen, SC, Juan, Y-L, Tang, CH, Chang, CF & Chen, TR 2010, Analysis of the harmonics losses and bearing load for motorized high speed spindle part I: Modeling. in IEEM2010 - IEEE International Conference on Industrial Engineering and Engineering Management., 5675604, pp. 772-777, IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2010, Macao, China, 10-12-07. https://doi.org/10.1109/IEEM.2010.5675604

Analysis of the harmonics losses and bearing load for motorized high speed spindle part I : Modeling. / Chen, Shih Chang; Juan, Yu-Lin; Tang, Chia Hui; Chang, Ching Feng; Chen, Tsair Rong.

IEEM2010 - IEEE International Conference on Industrial Engineering and Engineering Management. 2010. p. 772-777 5675604.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Analysis of the harmonics losses and bearing load for motorized high speed spindle part I

T2 - Modeling

AU - Chen, Shih Chang

AU - Juan, Yu-Lin

AU - Tang, Chia Hui

AU - Chang, Ching Feng

AU - Chen, Tsair Rong

PY - 2010/12/1

Y1 - 2010/12/1

N2 - Angular contact bearings are the most popular type of bearings used in the motorized high speed spindle. An initial preload and operating-induced load control are managed to ensure its rigidity, but the centrifugal force and temperature will rise with the rapid increase of spindle speed. Although the centrifugal force and thermo induced bearings load are applied on the spindle assembly. This paper aims to study innovative structure solution of spindle and develop a new type of super precision bearings which will ensure the lifetime and high performance of spindle. Section II proposed an improved inverter output filter, for pulsewidth modulated (PWM) drive system. The proposed filter is shown to effectively reduce the power losses in the spindle. This usage of the filter can improve lifetime of bearings and gain a higher output power of the spindle. The simulations show a 20 KW, 400 Hz PWM drive system with total loss reduced 13.36%, and a 20KW, 800HZ PWM drive system with total loss reduced 15.77%. Therefore, the filter configuration is an excellent contribution for PWM drive system.

AB - Angular contact bearings are the most popular type of bearings used in the motorized high speed spindle. An initial preload and operating-induced load control are managed to ensure its rigidity, but the centrifugal force and temperature will rise with the rapid increase of spindle speed. Although the centrifugal force and thermo induced bearings load are applied on the spindle assembly. This paper aims to study innovative structure solution of spindle and develop a new type of super precision bearings which will ensure the lifetime and high performance of spindle. Section II proposed an improved inverter output filter, for pulsewidth modulated (PWM) drive system. The proposed filter is shown to effectively reduce the power losses in the spindle. This usage of the filter can improve lifetime of bearings and gain a higher output power of the spindle. The simulations show a 20 KW, 400 Hz PWM drive system with total loss reduced 13.36%, and a 20KW, 800HZ PWM drive system with total loss reduced 15.77%. Therefore, the filter configuration is an excellent contribution for PWM drive system.

UR - http://www.scopus.com/inward/record.url?scp=78751697175&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78751697175&partnerID=8YFLogxK

U2 - 10.1109/IEEM.2010.5675604

DO - 10.1109/IEEM.2010.5675604

M3 - Conference contribution

AN - SCOPUS:78751697175

SN - 9781424485031

SP - 772

EP - 777

BT - IEEM2010 - IEEE International Conference on Industrial Engineering and Engineering Management

ER -

Chen SC, Juan Y-L, Tang CH, Chang CF, Chen TR. Analysis of the harmonics losses and bearing load for motorized high speed spindle part I: Modeling. In IEEM2010 - IEEE International Conference on Industrial Engineering and Engineering Management. 2010. p. 772-777. 5675604 https://doi.org/10.1109/IEEM.2010.5675604