A wideband bandpass filter using combined λ/4 stepped-impedance resonators

Lian Yu Chen, Chung I.G. Hsu, Ching-Her Lee

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper presents a wideband bandpass filter (BPF) designed using novel multi-mode resonators (MMRs). The MMR is formed by combining two quarter-wavelength (λ/4) stepped-impedance resonators (SIRs) in a proper fashion. The fundamental resonant frequency of the inherent λ/4 SIR and that of the embedded half-wavelength (λ/4) SIR were designed to be located in the passband of the BPF. Experiments on a second-order wideband BPF were carried out for validating the filter design. The fabricated BPF was measured to have a large bandwidth of 1:2.1 with a minimum insertion loss of only 0.35 dB and a small group-delay variation of not more than 0.15 ns in the passband.

Original languageEnglish
Title of host publicationTENCON 2007 - 2007 IEEE Region 10 Conference
DOIs
Publication statusPublished - 2007 Dec 1
EventIEEE Region 10 Conference, TENCON 2007 - Taipei, Taiwan
Duration: 2007 Oct 302007 Nov 2

Publication series

NameIEEE Region 10 Annual International Conference, Proceedings/TENCON

Other

OtherIEEE Region 10 Conference, TENCON 2007
CountryTaiwan
CityTaipei
Period07-10-3007-11-02

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Computer Science Applications
  • Electrical and Electronic Engineering

Cite this

Chen, L. Y., Hsu, C. I. G., & Lee, C-H. (2007). A wideband bandpass filter using combined λ/4 stepped-impedance resonators. In TENCON 2007 - 2007 IEEE Region 10 Conference [4428995] (IEEE Region 10 Annual International Conference, Proceedings/TENCON). https://doi.org/10.1109/TENCON.2007.4428995