A simple impedance-matching technique for patch antennas fed by coplanar microstrip line

Jeen-Sheen Row

doi:10.1109/TAP.2005.856375

A simple impedance-matching technique for patch antennas fed by coplanar microstrip line

Jeen-Sheen Row

Department of Electrical Engineering

Research output: Contribution to journal › Article

16 Citations (Scopus)

Abstract

A simple impedance-matching technique for the patch antennas fed by a coplanar microstrip line is presented. By placing a shorting through hole at a proper position, the resonant input resistance of the edge-fed patch antenna can be easily tuned to 50 Ω. For the cases of the patch antennas with the aspect ratios varied from 0.5 to 2, both theoretical and experimental investigations of the proposed technique are carried out. From the obtained results, it is shown that, to acquire the 50 Ft input impedance, the position of the through hole is only related to the length of the radiating edge of the patch antenna. Details of the antenna design are presented.

Original language	English
Pages (from-to)	3389-3391
Number of pages	3
Journal	IEEE Transactions on Antennas and Propagation
Volume	53
Issue number	10
DOIs	https://doi.org/10.1109/TAP.2005.856375
Publication status	Published - 2005 Oct 1

Fingerprint

All Science Journal Classification (ASJC) codes

Computer Networks and Communications
Electrical and Electronic Engineering

Cite this

Row, J-S. (2005). A simple impedance-matching technique for patch antennas fed by coplanar microstrip line. IEEE Transactions on Antennas and Propagation, 53(10), 3389-3391. https://doi.org/10.1109/TAP.2005.856375

@article{22a438ca05014cff874703d99a62c01a,

title = "A simple impedance-matching technique for patch antennas fed by coplanar microstrip line",

abstract = "A simple impedance-matching technique for the patch antennas fed by a coplanar microstrip line is presented. By placing a shorting through hole at a proper position, the resonant input resistance of the edge-fed patch antenna can be easily tuned to 50 Ω. For the cases of the patch antennas with the aspect ratios varied from 0.5 to 2, both theoretical and experimental investigations of the proposed technique are carried out. From the obtained results, it is shown that, to acquire the 50 Ft input impedance, the position of the through hole is only related to the length of the radiating edge of the patch antenna. Details of the antenna design are presented.",

author = "Jeen-Sheen Row",

year = "2005",

month = oct

day = "1",

doi = "10.1109/TAP.2005.856375",

language = "English",

volume = "53",

pages = "3389--3391",

journal = "IEEE Transactions on Antennas and Propagation",

issn = "0018-926X",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "10",

}

TY - JOUR

T1 - A simple impedance-matching technique for patch antennas fed by coplanar microstrip line

AU - Row, Jeen-Sheen

PY - 2005/10/1

Y1 - 2005/10/1

N2 - A simple impedance-matching technique for the patch antennas fed by a coplanar microstrip line is presented. By placing a shorting through hole at a proper position, the resonant input resistance of the edge-fed patch antenna can be easily tuned to 50 Ω. For the cases of the patch antennas with the aspect ratios varied from 0.5 to 2, both theoretical and experimental investigations of the proposed technique are carried out. From the obtained results, it is shown that, to acquire the 50 Ft input impedance, the position of the through hole is only related to the length of the radiating edge of the patch antenna. Details of the antenna design are presented.

AB - A simple impedance-matching technique for the patch antennas fed by a coplanar microstrip line is presented. By placing a shorting through hole at a proper position, the resonant input resistance of the edge-fed patch antenna can be easily tuned to 50 Ω. For the cases of the patch antennas with the aspect ratios varied from 0.5 to 2, both theoretical and experimental investigations of the proposed technique are carried out. From the obtained results, it is shown that, to acquire the 50 Ft input impedance, the position of the through hole is only related to the length of the radiating edge of the patch antenna. Details of the antenna design are presented.

UR - http://www.scopus.com/inward/record.url?scp=27644586213&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=27644586213&partnerID=8YFLogxK

U2 - 10.1109/TAP.2005.856375

DO - 10.1109/TAP.2005.856375

M3 - Article

AN - SCOPUS:27644586213

VL - 53

SP - 3389

EP - 3391

JO - IEEE Transactions on Antennas and Propagation

JF - IEEE Transactions on Antennas and Propagation

SN - 0018-926X

IS - 10

ER -

Access to Document

10.1109/TAP.2005.856375