A DSP-based active power filter rooted on energy balance concept

Ding Tsair Su, Jui Liang Yang, Ying Shing Shiao

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The object of this paper is to design a single phase digital active power filter, which adopts an energy balance concept to simplify the control method. Only one current sensor and two voltage sensors are needed to detect the input current, the input voltage and the DC bus voltage. The digital signal processor controller is used to implement the simple PI control method. The proposed method provides both harmonic suppression and power factor correction. Finally, the feasibility of the proposed control method is verified from PSPICE simulation and experimental results.

Original languageEnglish
Title of host publication3rd International Conference on Innovative Computing Information and Control, ICICIC'08
DOIs
Publication statusPublished - 2008 Sep 30
Event3rd International Conference on Innovative Computing Information and Control, ICICIC'08 - Dalian, Liaoning, China
Duration: 2008 Jun 182008 Jun 20

Other

Other3rd International Conference on Innovative Computing Information and Control, ICICIC'08
CountryChina
CityDalian, Liaoning
Period08-06-1808-06-20

Fingerprint

Energy balance
Electric potential
Sensors
Digital signal processors
SPICE
Controllers

All Science Journal Classification (ASJC) codes

  • Computer Science Applications
  • Software
  • Control and Systems Engineering

Cite this

Su, D. T., Yang, J. L., & Shiao, Y. S. (2008). A DSP-based active power filter rooted on energy balance concept. In 3rd International Conference on Innovative Computing Information and Control, ICICIC'08 [4603670] https://doi.org/10.1109/ICICIC.2008.26
Su, Ding Tsair ; Yang, Jui Liang ; Shiao, Ying Shing. / A DSP-based active power filter rooted on energy balance concept. 3rd International Conference on Innovative Computing Information and Control, ICICIC'08. 2008.
@inproceedings{f5a7a1ffda7143db970b04874dee616f,
title = "A DSP-based active power filter rooted on energy balance concept",
abstract = "The object of this paper is to design a single phase digital active power filter, which adopts an energy balance concept to simplify the control method. Only one current sensor and two voltage sensors are needed to detect the input current, the input voltage and the DC bus voltage. The digital signal processor controller is used to implement the simple PI control method. The proposed method provides both harmonic suppression and power factor correction. Finally, the feasibility of the proposed control method is verified from PSPICE simulation and experimental results.",
author = "Su, {Ding Tsair} and Yang, {Jui Liang} and Shiao, {Ying Shing}",
year = "2008",
month = "9",
day = "30",
doi = "10.1109/ICICIC.2008.26",
language = "English",
isbn = "9780769531618",
booktitle = "3rd International Conference on Innovative Computing Information and Control, ICICIC'08",

}

Su, DT, Yang, JL & Shiao, YS 2008, A DSP-based active power filter rooted on energy balance concept. in 3rd International Conference on Innovative Computing Information and Control, ICICIC'08., 4603670, 3rd International Conference on Innovative Computing Information and Control, ICICIC'08, Dalian, Liaoning, China, 08-06-18. https://doi.org/10.1109/ICICIC.2008.26

A DSP-based active power filter rooted on energy balance concept. / Su, Ding Tsair; Yang, Jui Liang; Shiao, Ying Shing.

3rd International Conference on Innovative Computing Information and Control, ICICIC'08. 2008. 4603670.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - A DSP-based active power filter rooted on energy balance concept

AU - Su, Ding Tsair

AU - Yang, Jui Liang

AU - Shiao, Ying Shing

PY - 2008/9/30

Y1 - 2008/9/30

N2 - The object of this paper is to design a single phase digital active power filter, which adopts an energy balance concept to simplify the control method. Only one current sensor and two voltage sensors are needed to detect the input current, the input voltage and the DC bus voltage. The digital signal processor controller is used to implement the simple PI control method. The proposed method provides both harmonic suppression and power factor correction. Finally, the feasibility of the proposed control method is verified from PSPICE simulation and experimental results.

AB - The object of this paper is to design a single phase digital active power filter, which adopts an energy balance concept to simplify the control method. Only one current sensor and two voltage sensors are needed to detect the input current, the input voltage and the DC bus voltage. The digital signal processor controller is used to implement the simple PI control method. The proposed method provides both harmonic suppression and power factor correction. Finally, the feasibility of the proposed control method is verified from PSPICE simulation and experimental results.

UR - http://www.scopus.com/inward/record.url?scp=52449100876&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=52449100876&partnerID=8YFLogxK

U2 - 10.1109/ICICIC.2008.26

DO - 10.1109/ICICIC.2008.26

M3 - Conference contribution

SN - 9780769531618

BT - 3rd International Conference on Innovative Computing Information and Control, ICICIC'08

ER -

Su DT, Yang JL, Shiao YS. A DSP-based active power filter rooted on energy balance concept. In 3rd International Conference on Innovative Computing Information and Control, ICICIC'08. 2008. 4603670 https://doi.org/10.1109/ICICIC.2008.26