Find Research outputs

Search results

• A block-based division reversible data hiding method in encrypted images

  Liu, W. L., Leng, H. S., Huang, C. K. & Chen, D. C., 2017 Dec 1, In: Symmetry. 9, 12, 308.

  Research output: Contribution to journal › Article › peer-review

  • Data Hiding
  • Division
  • division
  • Pixels
  • Digital storage
  6 Citations (Scopus)

• Analysis of forging forming of 6061 aluminum alloy bicycle pedal

  Chen, D. C., Shiu, J. R., Nian, F. L. & Chen, M. R., 2013 Jan 24, Frontiers of Manufacturing and Design Science III. PART 1 ed. p. 31-35 5 p. (Applied Mechanics and Materials; vol. 271, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Forging
  • Aluminum alloys
  • Taguchi methods
  • Sports
  2 Citations (Scopus)

• An Investigation into CIGS Thin-Films Solar Cell P2 Layer Scribing Depth and Width Using Different Laser Process Parameters

  Chen, D. C., Chen, M. F. & Chen, M. R., 2015, In: Advances in Materials Science and Engineering. 2015, 894673.

  Research output: Contribution to journal › Article › peer-review

  • Thin film solar cells
  • Lasers
  • Stainless Steel
  • Stainless steel
  • Solar cells
  1 Citation (Scopus)

• An investigation into suitable friction factor and optimized forming process of 6061 aluminum alloy bicycle stem

  Chen, D-C., Lin, J. G., Chu, Y. T. & Shiu, J. R., 2015 Feb 1, In: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 36, 1, p. 41-48 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Bicycles
  • Aluminum alloys
  • Friction
  • Metal forming
  • Aluminum

• Application of ANOVA and taguchi-based mutation particle swarm algorithm for parameters design of multi-hole extrusion process

  Chen, W. J., Su, W. C., Nian, F. L., Lin, J. R. & Chen, D. C., 2013, In: Research Journal of Applied Sciences, Engineering and Technology. 6, 13, p. 2316-2325 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Analysis of variance (ANOVA)
  • Extrusion
  • Bending (forming)
  • Taguchi methods
  • Particle swarm optimization (PSO)
  4 Citations (Scopus)

• Application of response surface methodology and elitist multi-objective hybrid particle swarm algorithm for optimization design of an air-core linear motor

  Chen, W-J., Su, W. C., Chen, D-C. & Nian, F. L., 2012 Nov 1, In: International Journal of Advancements in Computing Technology. 4, 20, p. 72-81 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Linear motors
  • Magnets
  • Sorting
  • Air
  • Multiobjective optimization

• Application of the Taguchi method for finite element analysis of a shear-type magnetorheological fluid damper

  Chen, D. C. & Chen, L. R., 2020 Apr, In: Advances in Mechanical Engineering. 12, 4

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Magnetorheological fluids
  • Taguchi methods
  • Pistons
  • Finite element method
  • Magnetic flux
  1 Citation (Scopus)

• A study on the cellphone cover-forming process of titanium alloys using the finite element method

  Chen, D. C., Chen, M. R. & Nian, F. L., 2012, Frontiers of Manufacturing and Design Science II. p. 1550-1554 5 p. (Applied Mechanics and Materials; vol. 121-126).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Titanium alloys
  • Finite element method
  • Stamping
  • Plastic deformation
  • Plastics

• A Study Regarding the Gap between the Industry and Academia Expectations for College Student's Employability

  Sui, F. M., Chang, J. C., Hsiao, H. C., Chen, S. C. & Chen, D. C., 2019 Jan 9, 2018 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2018. IEEE Computer Society, p. 1573-1577 5 p. 8607269. (IEEE International Conference on Industrial Engineering and Engineering Management; vol. 2019-December).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Employability
  • College Students
  • Students
  • Education
  • Word processing
  2 Citations (Scopus)

• Design and surface roughness analysis of thin-sheet plastic injection forming

  Chen, D-C., Pan, J. Y., Gao, J. W. & Chen, W-J., 2013 Aug 8, Intelligent Technologies and Engineering Systems. p. 743-753 11 p. (Lecture Notes in Electrical Engineering; vol. 234 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Plastic sheets
  • Surface roughness
  • Plastics
  • Plastic products
  • Plastics molding

• Development of assessment indicators for measuring the student learning effects of artificial intelligence-based robot design

  Shyr, W-J., Yang, F. C., Liu, P. W., Hsieh, Y. M., You, C. S. & Chen, D-C., 2019 Jul 1, In: Computer Applications in Engineering Education. 27, 4, p. 863-868 6 p.

  Research output: Contribution to journal › Article › peer-review

  • learning success
  • robot
  • artificial intelligence
  • Artificial intelligence
  • Students
  1 Citation (Scopus)

• Development of professional competencies for artificial intelligence in finite element analysis

  Chen, D. C., You, C. S. & Su, M. S., 2020 Jan 1, (Accepted/In press) In: Interactive Learning Environments.

  Research output: Contribution to journal › Article › peer-review

  • artificial intelligence
  • Artificial intelligence
  • Finite element method
  • questionnaire
  • training plan

• Diamond shape division reversible data hiding in encrypted images

  Huang, C. K., Chen, D. C., Liu, W. L. & Huang, S. C., 2017 Dec 1, In: ICIC Express Letters, Part B: Applications. 8, 12, p. 1559-1566 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Diamonds
  • Pixels
  • Statistical methods

• Die stress analysis and improvement of the welding valve fastener in multi-stage forging

  Tzou, G. Y., Lin, S. H., Chen, D. C. & Chai, U. C., 2020 Jan 1, In: Transactions of the Canadian Society for Mechanical Engineering. 44, 2, p. 263-271 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Fasteners
  • Forging
  • Stress analysis
  • Welding
  • Stress concentration

• Effect of Electrode Route Motion on Electrode Wear in EDM Machining of Mold Steel

  Chen, D. C., Wang, Y. K. & Lin, G. F., 2013 Oct, In: Arabian Journal for Science and Engineering. 38, 10, p. 2793-2800 8 p.

  Research output: Contribution to journal › Article › peer-review

  • machining
  • routes
  • steels
  • electrodes
  • surface roughness
  2 Citations (Scopus)

• Employability Table for Mechanical and Mechanical College Students in Science and Technology Colleges After Graduation: Analysis of Employability of Graduates and Employers

  Chen, D. C., Hsiao, H. C., Chang, J. C., Chen, S. C., Gao, Y. C., Guo, J. Y. & Chen, Y. H., 2019 Jan 1, Innovative Technologies and Learning - 2nd International Conference, ICITL 2019, Proceedings. Rønningsbakk, L., Wu, T-T., Sandnes, F. E. & Huang, Y-M. (eds.). Springer, p. 836-846 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11937 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Table
  • Students
  • Mechanical engineering
  • Performance
  • Self-assessment

• Enabling mlearning technologies into integrating off-campus internship and capstone courses for technological university in Taiwan

  Chen, S. C., Hsiao, H. C., Chang, J. C. & Chen, D. C., 2020, Proceedings of the 16th International Conference Mobile Learning 2020, ML 2020. IADIS, p. 135-137 3 p. (Proceedings of the 16th International Conference Mobile Learning 2020, ML 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Teaching
  • Design of experiments
  • Students
  • Experiments
  • Industry

• Enhancement of extrusion die learning based on a simulation analysis

  Chen, D. C., You, C. S. & Liu, K. H., 2016 Jan 1, In: World Transactions on Engineering and Technology Education. 14, 2, p. 282-287 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Extrusion dies
  • simulation
  • Students
  • learning
  • engineer

• FEM Analysis and Experiment Validation on Multi-Pass Forging of Torx Round Flange Bolt

  Lin, S. H., Chen, D. C., Chai, U. C. & Tzou, G. Y., 2020 Oct 1, In: International Journal of Automotive Technology. 21, 5, p. 1113-1119 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Forging
  • Bolts
  • Flanges
  • Finite element method
  • Experiments

• Finite element analysis and die design of extrusion processes of radial-finned heat sink

  Chen, D. C., Chen, J. M., Guo, M. W., Jao, C. H. & Chen, W. J., 2011, Advances in Materials and Processing Technologies II, AMPT 2009. p. 30-35 6 p. (Advanced Materials Research; vol. 264-265).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Heat sinks
  • Extrusion
  • Extrusion dies
  • Finite element method
  • Friction

• Finite element analysis of advanced bicycle precision brake disk forming technology

  Chen, D. C., Kang, J. H. & Lai, C. C., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 12004. (MATEC Web of Conferences; vol. 21).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Brakes
  • Finite element method
  • Modal analysis
  • Oils

• Finite element analysis of chip breaker geometry in turning process

  Chen, D. C., You, C. S. & Kao, S. H., 2016 Jul 1, In: Advances in Mechanical Engineering. 8, 7, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Wear of materials
  • Cutting tools
  • Finite element method
  • Geometry
  • Aluminum alloys
  4 Citations (Scopus)

• Finite element analysis of deep drawing

  Chen, D. C., Cheng-Yu, L. & Lai, Y. Y., 2019 Sep, In: Advances in Mechanical Engineering. 11, 9

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Deep drawing
  • Aluminum alloys
  • Plastic flow
  • Finite element method
  • Plastic deformation
  2 Citations (Scopus)

• Finite element analysis of rim ring rolling forming of bicycle aluminum alloy

  Chen, D. C., Lai, B. Y. & You, C. S., 2012 Feb 15, Materials and Manufacturing Technologies XIV. p. 231-236 6 p. (Advanced Materials Research; vol. 445).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Aluminum alloys
  • Finite element method
  • Sports
  • Pollution

• Forging process of bicycle chain wheel using experiment and finite element analysis

  Chen, D-C., Nian, F. L. & Chen, M. R., 2012 Jul 2, In: Advanced Science Letters. 9, p. 68-73 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Forging
  • bicycle
  • Finite Element Analysis
  • Bicycles
  • Wheel

• Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy

  Chen, D. C. & You, C. S., 2015 Jan 1, In: Strength of Materials. 47, 1, p. 122-127 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Aluminum alloys
  • Ductile fracture
  • Finite element method
  • Stamping
  • Forging
  1 Citation (Scopus)

• Investigation into bicycle front fork forming process of simulation and experiment

  Chen, D. C. & Ku, W. H., 2015, Advances in Engineering Plasticity XII. Trans Tech Publications Ltd, p. 199-204 6 p. (Key Engineering Materials; vol. 626).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Forging
  • titanium alloy (TiAl6V4)
  • Experiments
  • Taguchi methods

• Investigation on fracture and conductivity of flex-on-film flexible bonding using anisotropic conductive film considering repeated bending

  Lin, C. M., Chen, D. C. & Liu, Y. C., 2019 Aug 1, In: Microsystem Technologies. 25, 8, p. 3017-3026 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Conductive films
  • conductivity
  • Acoustic impedance
  • electrical resistance
  • Electrodes
  3 Citations (Scopus)

• Investigation on Optimization of Baking in Sole Bonding Process

  Chen, D. C., Jin, H. W. & Su, J. Z., 2019 Oct 24, In: IOP Conference Series: Materials Science and Engineering. 644, 1, 012002.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Heating
  • Computer aided engineering
  • Hot Temperature
  • Industry
  • Temperature

• Multi-stage forging on torx-pin screw with high torque

  Tzou, G. Y., Chen, D. C. & Lin, S. H., 2017 Aug 4, In: MATEC Web of Conferences. 119, 01048.

  Research output: Contribution to journal › Conference article › peer-review

  • Forging
  • Torque
  • Finite element method
  • Needles
  • Friction
  1 Citation (Scopus)

• Optimization analysis of A7075 bicycle stem forging process

  Chen, D. C., Shiu, J. R. & Lin, J. G., 2013, The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales. Trans Tech Publications Ltd, p. 227-233 7 p. (Key Engineering Materials; vol. 554-557).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Forging
  • Taguchi methods
  • Structural analysis
  • Stress analysis
  1 Citation (Scopus)

• Optimization design of parameters with hybrid particle swarm optimization algorithm in multi-hole extrusion process

  Chen, W-J., Chen, D-C., Su, W. C. & Nian, F. L., 2012 Feb 2, Advances in Electronic Engineering, Communication and Management Vol. 2 - Proceedings of 2011 International Conference on Electronic Engineering, Communication and Management, EECM 2011. p. 279-284 6 p. (Lecture Notes in Electrical Engineering; vol. 140 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Extrusion
  • Particle swarm optimization (PSO)
  • Bending (forming)
  • Titanium alloys
  • Plastic deformation
  2 Citations (Scopus)

• Optimization of the parameters for the rotary diamond dressing of grinding wheels

  Liu, C. C., Chen, D. C. & Kuo, T. Y., 2019 Jan 1, In: Smart Science. 7, 3, p. 184-188 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Grinding
  • Diamond
  • Grinding wheels
  • Wheel
  • Strombus or kite or diamond
  1 Citation (Scopus)

• Optimum design of Si-Cr alloy springs for seismic vibration isolator

  Chen, D. C., Kao, S. H., Chen, L. R., Wang, S. J., Chen, C. Y. & Huang, C. K., 2017 Jan 1, Advances in Engineering Plasticity and its Application XIII. Yoshida, F. & Hamasaki, H. (eds.). Trans Tech Publications Ltd, p. 700-705 6 p. (Key Engineering Materials; vol. 725 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Stress analysis
  • Wire

• Research on the Implementation Status and Learning Satisfaction of Off-campus Internship Courses in the Department of Mechanical Engineering of the University of Technology

  Chen, D. C., Hsiao, H. C., Chang, J. C., Chen, S. C., Wen, K. C., Guo, J. Y. & Gao, Y. C., 2020, Innovative Technologies and Learning - Third International Conference, ICITL 2020, Proceedings. Huang, T-C., Wu, T-T., Barroso, J., Sandnes, F. E., Martins, P. & Huang, Y-M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 172-181 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 12555 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Mechanical engineering
  • Teaching
  • Learning
  • Engineering
  • Students

• Robust design of ring rolling process for titanium alloy using the Taguchi method and the finite element method

  Chen, D. C., You, C. S., Guo, M. W. & Lai, B. Y., 2011, Advanced Design and Manufacture III, ADM2010. Trans Tech Publications Ltd, p. 177-180 4 p. (Key Engineering Materials; vol. 450).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Taguchi methods
  • Titanium alloys
  • Finite element method
  • Plastic deformation
  • titanium alloy (TiAl6V4)
  1 Citation (Scopus)

• Simulation analysis of turbine blade in 3D printing aquarium

  Chen, D. C., Lai, B. Y. & Gao, F. Y., 2017 Sep 21, In: MATEC Web of Conferences. 123, 00008.

  Research output: Contribution to journal › Conference article › peer-review

  • Turbomachine blades
  • Printing
  • Turbines
  • Stress analysis
  • Product design

• Slab analysis, FEM simulation and experimental verification on rotating forging of three-layer clad cylinder with constant shear friction

  Tzou, G. Y., Chen, D. C. & Lin, S. H., 2015 Apr 3, In: Advances in Materials and Processing Technologies. 1, 1-2, p. 223-233 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Forging
  • Friction
  • Finite element method
  • Torque
  • Shear stress

• Study of 6061 aluminum alloy milling using four- blade face cutter

  Chen, D-C., You, C. S., Tu, C. A. & Ni, C. H., 2015 Jan 1, Materials and Technologies in Precision Machinery. Tzou, G-Y. (ed.). Trans Tech Publications Ltd, p. 62-68 7 p. (Key Engineering Materials; vol. 661).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Milling cutters
  • Aluminum alloys
  • Finite element method
  • Aluminum
  • Wear of materials

• Study of 6061 Aluminum Alloy Thread Turning

  Chen, D. C., You, C. S. & Yu, M. J., 2017 Feb 1, In: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 38, 1, p. 33-40 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Aluminum alloys
  • Abrasion
  • Thread cutting
  • Cutting fluids
  • Cutting tools
  1 Citation (Scopus)

• Study of forging forming of 7075 aluminum alloy bicycle pedal

  Chen, D. C., Nian, F. L., Shiu, J. R. & Ku, W. H., 2012, Advanced Manufacturing Focusing on Multi-Disciplinary Technologies. p. 101-108 8 p. (Advanced Materials Research; vol. 579).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Forging
  • Aluminum alloys
  • Plastic deformation
  • Plastics
  1 Citation (Scopus)

• Study of piezoelectric materials combined with electromagnetic design for bicycle harvesting system

  Chen, D. C., Kao, S. H. & Huang, C. K., 2016 Apr, In: Advances in Mechanical Engineering. 8, 4, p. 1-11 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Piezoelectric materials
  • Bicycles
  • Energy harvesting
  • Electric coils
  • Magnetoelectric effects

• Study on mold flow analysis and injection product verification by analysis of variance and response surface method-taking toothbrush as an example

  Chen, D. C., Wen, K. C., Yang, R. S. & Lai, Y. Y., 2020, Materials and Technologies in Precision Machinery III. Tzou, G-Y. (ed.). Trans Tech Publications Ltd, p. 64-73 10 p. (Solid State Phenomena; vol. 311 SSP).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • analysis of variance
  • Analysis of variance (ANOVA)
  • Injection molding
  • Plastics industry
  • Computer aided engineering

• Study on wire rod drawing process using the rotating die

  Tzou, G. Y., Chen, D. C. & Lin, S. H., 2016, Metal Forming 2016. Szeliga, D. & Muszka, K. (eds.). Trans Tech Publications Ltd, p. 63-67 5 p. (Key Engineering Materials; vol. 716).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Wire
  • Finite element method
  • Friction
  • Angular velocity
  3 Citations (Scopus)

• Taguchi method and genetic algorithm neural networks analysis of forging process of bicycle chain wheel

  Chen, D. C. & You, C. S., 2013 Feb 20, Innovation for Applied Science and Technology. p. 220-224 5 p. (Applied Mechanics and Materials; vol. 284-287).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Taguchi methods
  • Bicycles
  • Forging
  • Electric network analysis
  • Wheels

• The effect of creative instruction on academic performance for mould manufacturing courses

  Chen, D. C., Lai, B. Y., Lee, C. Y. & Lai, G. Y., 2012 Jul 27, In: IEEE Global Engineering Education Conference, EDUCON. 6201085.

  Research output: Contribution to journal › Conference article › peer-review

  • Academic Performance
  • manufacturing
  • instruction
  • Manufacturing
  • performance
  1 Citation (Scopus)

• Using AHP to critical thinking develop in precision measurement of vocational college students

  Chen, D. C., You, C. S., Gao, F. Y. & Lai, B. Y., 2017 Jan 1, Emerging Technologies for Education - 1st International Symposium, SETE 2016 Held in Conjunction with ICWL 2016, Revised Selected Papers. Gennari, R., Cao, Y., Huang, Y-M., Wu, W. & Xie, H. (eds.). Springer Verlag, p. 117-122 6 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10108 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Critical Thinking
  • Analytic Hierarchy Process
  • Analytic hierarchy process
  • Students
  • Content Analysis

• Using AHP to project-based learning develop in machinery manufacturing of technology universities students

  Chen, D. C., You, C. S. & Huang, Y. C., 2017 Jan 1, Emerging Technologies for Education - 2nd International Symposium, SETE 2017, Held in Conjunction with ICWL 2017, Revised Selected Papers. Huang, T-C., Lau, R., Huang, Y-M., Spaniol, M. & Yuen, C-H. (eds.). Springer Verlag, p. 154-160 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10676 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Project-based Learning
  • Analytic Hierarchy Process
  • Universities
  • Analytic hierarchy process
  • Manufacturing

• Using an analytic hierarchy process to develop competencies on mould product creativity for vocational college students

  Chen, D-C., Chen, C. P., Lee, C. Y., You, C. S. & Jao, C. H., 2011 Dec 1, In: World Transactions on Engineering and Technology Education. 9, 1, p. 54-59 6 p.

  Research output: Contribution to journal › Article › peer-review

  • vocational college
  • Textbooks
  • Analytic hierarchy process
  • creativity
  • Students
  4 Citations (Scopus)

• Using the Taguchi method and finite element method to analyze a robust new design for titanium alloy prick hole extrusion

  Chen, D. C., You, C. S., Nian, F. L. & Guo, M. W., 2011 Jan 1, In: Procedia Engineering. 10, p. 82-87 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Taguchi methods
  • Titanium alloys
  • Extrusion
  • Finite element method
  • Plastic deformation
  8 Citations (Scopus)