Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Ming-Fei Chen
2011

Optimized laser cutting on light guide plates using grey relational analysis

Chen, M-F., Ho, Y. S., Hsiao, W. T., Wu, T. H., Tseng, S. F. & Huang, K. C., 2011 Feb 1, In : Optics and Lasers in Engineering. 49, 2, p. 222-228 7 p.

Research output: Contribution to journalArticle

27 Citations (Scopus)

Fabrication of electrodes on the aluminum doped zinc oxide thin films using an ultraviolet laser direct-patterning technology

Hsiao, W. T., Tseng, S. F., Kuo, C. H., Huang, K. C., Chiang, D., Yao, P. C. & Chen, M. F., 2011 Jan 1, In : Physics Procedia. 19, p. 456-465 10 p.

Research output: Contribution to journalConference article

7 Citations (Scopus)
2013

Microhole machining of silicon wafer in air and under deionized water by pulsed UV laser system

Hsiao, W. T., Tseng, S. F., Huang, K. C., Chiang, D. & Chen, M. F., 2013 Jan 1, In : Applied Physics A: Materials Science and Processing. 110, 3, p. 565-570 6 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
2011

Examination of the developed scanning system for Red-Green-Blue Laser Projector with a feedback control

Chen, M-F., Ho, Y. S., Chung, C. K., Huang, W. L. & Wang, S. M., 2011 Jan 1, In : Optical Review. 18, 1, p. 128-131 4 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
2017

Vibration characteristics and modal analysis of a grinding machine

Chen, D. C., Chen, M. F., Kang, J. H. & Lai, C. C., 2017 Dec 1, In : Journal of Vibroengineering. 19, 8, p. 6288-6300 13 p.

Research output: Contribution to journalArticle

2012

Influence of pretilt angle on disclination lines of liquid crystal lens

Kuo, C. H., Chien, W. C., Hsieh, C. T., Huang, C. Y., Jiang, J. J., Li, Y. C., Chen, M. F., Hsieh, Y. P., Kuo, H. L. & Lin, C. H., 2012 Jul 1, In : Applied Optics. 51, 19, p. 4269-4274 6 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
2018

Study of membrane restrictors in hydrostatic bearing

Chen, D. C., Chen, M. F., Pan, C. H. & Pan, J. Y., 2018 Sep 1, In : Advances in Mechanical Engineering. 10, 9

Research output: Contribution to journalArticle

1 Citation (Scopus)
2013

The development of a portable line-shaping optical system for silicon surface treatment

Tseng, S. F., Hsiao, W. T., Chang, H. C. & Chen, M-F., 2013 Apr 3, In : Optical Review. 20, 2, p. 163-166 4 p.

Research output: Contribution to journalArticle

Distortion aberration correction device fabricated with liquid crystal lens array

Hsieh, C. T., Hsu, Y. F., Chung, C. W., Chen, M. F., Su, W. C. & Huang, C. Y., 2013 Jan 28, In : Optics Express. 21, 2, p. 1937-1943 7 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)
2016

Optical glass substrates forming processes using pulsed ultraviolet laser micromilling technology

Hsiao, W. T., Yang, C. C., Huang, K. C., Chung, C. K., Tseng, S. F., Chiang, D. & Chen, M. F., 2016, In : Journal of Laser Micro Nanoengineering. 11, 1, p. 30-34 5 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2015
1 Citation (Scopus)
2011
2012

Edge isolation of transparent conductive polymer (TCP) thin films on flexible substrates using UV laser ablation

Hsiao, W. T., Tseng, S. F., Huang, K. C., Chiang, D. & Chen, M. F., 2012 Jul 23, In : Journal of Nanoscience and Nanotechnology. 12, 6, p. 4905-4910 6 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2011

Hydrophobic templates with rough patterns fabricated by laser micromachining for liquid droplets generation

Tseng, S. F., Huang, K. C., Chiang, D., Chen, M-F., Hsiao, S. Y., Lin, Y. S. & Chou, C. P., 2011 Aug 8, Advances in Materials and Processing Technologies II, AMPT 2009. p. 1234-1239 6 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019

Identification of the scraping quality for the machine tool using the smartphone

Chen, M. F., Chen, C. W., Su, C. J., Huang, W. L. & Hsiao, W. T., 2019 Dec 1, In : International Journal of Advanced Manufacturing Technology. 105, 7-8, p. 3451-3461 11 p.

Research output: Contribution to journalArticle

2014

Thermal Effect on a CIGS Thin-Film Solar Cell P2 Layer by Using a UV Laser

Chen, D. C., Chen, M. F. & Chen, M. R., 2014 Jan 1, In : Advances in Mechanical Engineering. 2014, 723136.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2013

Effects of macro- and micro-hole milling parameters on Al2O 3 ceramics using an ultraviolet laser system

Hsiao, W. T., Tseng, S. F., Chung, C. K., Huang, K. C. & Chen, M. F., 2013 Aug 15, International Conference on Optics in Precision Engineering and Nanotechnology, icOPEN 2013. Vol. 8769. 87693L

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of portable laser machining system for laser writing applications

Hsiao, W. T., Tseng, S. F., Chung, C. K., Chen, P. H. & Chen, M-F., 2013 Apr 3, In : Optical Review. 20, 2, p. 167-172 6 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
2014

The identification of nonlinear systems using C(t) - K (t) plane coordinates

Chen, M. F., Chen, D. C., Yang, C. H. & Tseng, S. F., 2014, In : Mathematical Problems in Engineering. 2014, 497872.

Research output: Contribution to journalArticle

2019

Aerostatic moving stage positioning compensation using a numerical algorithm combined with an image acquisition method

Chen, M. F., Wang, P. H. & Hsiao, W. T., 2019 Sep 1, In : International Journal of Advanced Manufacturing Technology. 104, 1-4, p. 1203-1210 8 p.

Research output: Contribution to journalArticle

High positioning accuracy of a dual-axis feeding system enhanced by using error compensation methods for UV laser processing system

Hsiao, W. T., Tseng, S. F., Chiang, D., Huang, K. C. & Chen, M. F., 2011 Aug 25, 2011 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2011 - Proceedings. p. 250-253 4 p. 5944028. (Conference Record - IEEE Instrumentation and Measurement Technology Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

A theoretical analysis and experimental verification of a laser drilling process for a ceramic substrate

Chen, M-F., Hsiao, W. T., Wang, M. C., Yang, K. Y. & Chen, Y. F., 2015 Dec 1, In : International Journal of Advanced Manufacturing Technology. 81, 9-12, p. 1723-1732 10 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)
2019

靜壓軸承之智慧感測裝置及智慧感測方法

Chen, M-F. & Chen, D-C., 2019 Feb 1, Patent No. I649545

Research output: Patent

2011

Effects of laser-induced recovery process on conductive property of SnO2:F thin films

Chen, M-F., Lin, K. M. & Ho, Y. S., 2011 Feb 15, In : Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 176, 2, p. 127-131 5 p.

Research output: Contribution to journalArticle

30 Citations (Scopus)
2017

Theoretical analysis and experimental verification of AZO/i-ZnO/CdS/CIGS multilayer stack isolation using 1064 nm and 355 nm laser wavelengths

Chen, M. F., Hsiao, W. T., Wang, M. C., Chen, Y. F. & Lo, C. M., 2017 Feb 1, In : Optical and Quantum Electronics. 49, 2, 85.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2015

Effect on structural, optical and electrical properties of aluminum-doped zinc oxide films using diode laser annealing

Hsiao, W. T., Tseng, S. F., Chung, C. K., Chiang, D., Huang, K. C., Lin, K. M., Li, L. Y. & Chen, M. F., 2015 May, In : Optics and Laser Technology. 68, p. 41-47 7 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)
2013

The vibration problem studying in micro actuator system using the differential transformation method

Liu, C-C. & Chen, M-F., 2013 Feb 20, Innovation for Applied Science and Technology. p. 1966-1970 5 p. (Applied Mechanics and Materials; vol. 284-287).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Parameters optimization of laser electrode patterning on ITO/glass using multi-performance characteristics analysis

Yang, C. C., Hsiao, W. T., Chung, C. K., Tseng, S. F., Huang, K. C. & Chen, M. F., 2016 May 19, Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016. Institute of Electrical and Electronics Engineers Inc., p. 1818-1822 5 p. 7475040. (Proceedings of the IEEE International Conference on Industrial Technology; vol. 2016-May).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface modification nanoporous titanium oxide films using continuous wave CO2 laser

Hsiao, W. T., Yang, C. C., Tseng, S. F., Chiang, D., Huang, K. C., Lin, K. M. & Chen, M-F., 2016 Apr 1, In : Applied Physics A: Materials Science and Processing. 122, 4, 381.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Isolation scribing on hybrid films for CIGS-based solar cell using various nanosecond pulsed laser wavelengths

Chen, M. F., Hsiao, W. T., Wang, M. C. & Chen, Y. F., 2016, In : Journal of Laser Micro Nanoengineering. 11, 2, p. 239-245 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2011

Pulsed Nd:YAG laser treatment of monocrystalline silicon substrate

Hsiao, W. T., Tseng, S. F., Huang, K. C., Wang, Y. H. & Chen, M. F., 2011 Sep 1, In : International Journal of Advanced Manufacturing Technology. 56, 1-4, p. 223-231 9 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)
2014

Effect of optical properties characteristic polymethylmethacrylate using UV laser direct-structuring

Chung, C. K., Hsaio, W. T., Tseng, S. F., Huang, K. C. & Chen, M-F., 2014 Jan 1, Advances in Materials and Processing Technologies XVI. Trans Tech Publications, p. 230-236 7 p. (Advanced Materials Research; vol. 939).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser micromilling of convex microfluidic channels onto glassy carbon for glass molding dies

Tseng, S. F., Chen, M-F., Hsiao, W. T., Huang, C. Y., Yang, C. H. & Chen, Y. S., 2014 Jun 1, In : Optics and Lasers in Engineering. 57, p. 58-63 6 p.

Research output: Contribution to journalArticle

22 Citations (Scopus)
2012

Laser annealing process of ITO thin films using beam shaping technology

Chen, M-F., Lin, K. M. & Ho, Y. S., 2012 Mar 1, In : Optics and Lasers in Engineering. 50, 3, p. 491-495 5 p.

Research output: Contribution to journalArticle

31 Citations (Scopus)
2017

Multi-performance characterization analysis of diameter and taper angle on alumina ceramic via using pulsed ultraviolet laser percussion drilling method

Chen, M. F., Hsiao, W. T., Wang, M. C., Yang, K. Y. & Chen, Y. F., 2017 Nov 1, In : Optical and Quantum Electronics. 49, 11, 383.

Research output: Contribution to journalArticle

2 Citations (Scopus)