Search concepts
|
Selected filters |
Search results
-
2011
Diagnosis of ball screw preload loss by vibration signals through the Hilbert-Huang transform and multiscale measure
Shin, Y. C., Huang, Y. C. & Chao, J. A., 2011, Information Technology for Manufacturing Systems II. p. 636-641 6 p. (Applied Mechanics and Materials; vol. 58-60).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
4 Citations (Scopus) -
Improved particle swarm optimization by updating constraints of PID control for real time linear motor positioning
Li, Y. H., Huang, Y-C. & Chao, J. A., 2011 Dec 1, Communication Systems and Information Technology - Selected Papers from the 2011 International Conference on Electric and Electronics, EEIC 2011. VOL. 4 ed. p. 515-523 9 p. (Lecture Notes in Electrical Engineering; vol. 100 LNEE, no. VOL. 4).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Prognostic diagnosis of ball screw preload loss for machine tool through the Hilbert-Huang transform and multiscale entropy measure
Huang, Y. C. & Chang, J. L., 2011 Aug 1, In: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 32, 4, p. 349-358 10 p.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
2012
Development of a piezoelectric micro-cutting system
Huang, Y-C. & Hsu, C. B., 2012 Dec 1, In: Journal of Technology. 27, 4, p. 171-178 8 p.Research output: Contribution to journal › Article › peer-review
-
Dynamic balancing modal analysis and vibration suppressing design for reciprocating compressor crankshaft
Huang, Y. C. & Lee, F. Y., 2012, Mechatronics and Applied Mechanics. p. 996-999 4 p. (Applied Mechanics and Materials; vol. 157-158).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Numerical simulation and experimental study on bonding tool design of thermosonic transducer for Flip-Chip bonding
Huang, Y. C. & Li, K. Y., 2012, Mechatronics and Applied Mechanics. p. 1670-1673 4 p. (Applied Mechanics and Materials; vol. 157-158).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Theoretical and experimental design of a new flexible hinged positioning stage
Huang, Y-C., Lee, C. Y. & Chen, C. R., 2012 Feb 1, In: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 33, 1, p. 59-66 8 p.Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus) -
2013
A quality monitoring online system using an early warning abnormal trend distribution: A thickness measurement case study using a LVDT
Chuo, P. C., Huang, Y. C., Chiu, M. C. & Cheng, H. C., 2013, Materials, Mechatronics and Automation II. p. 120-127 8 p. (Advanced Materials Research; vol. 740).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Design and experiment of iterative learning controller based on particle swarm optimization approach with new bounded constraints technique
Huang, Y. C., Li, Y. H. & Li, S. T., 2013 Feb 20, Innovation for Applied Science and Technology. p. 2233-2237 5 p. (Applied Mechanics and Materials; vol. 284-287).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Improved Particle Swarm Optimization by Updating Constraints of PID Control for Real Time Linear Motor Positioning
Huang, Y. C. & Li, Y. H., 2013 Aug 1, In: Intelligent Automation and Soft Computing. 19, 3, p. 425-437 13 p.Research output: Contribution to journal › Article › peer-review
-
Precision motion of iterative learning controller using adaptive filter bandwidth tuning by improved particle swarm optimization technique
Huang, Y-C., Li, S. T. & Peng, K. H., 2013 Oct 22, Materials and Diverse Technologies in Industry and Manufacture. p. 349-353 5 p. (Applied Mechanics and Materials; vol. 376).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Prognostic diagnosis of hollow ball screw pretension on preload loss through sensed vibration signals
Huang, Y. C., Chen, Y. S., Sun, S. L. & Peng, K. H., 2013 Aug 8, Intelligent Technologies and Engineering Systems. p. 959-966 8 p. (Lecture Notes in Electrical Engineering; vol. 234 LNEE).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Prognostic diagnosis of the preload loss for single nut ball screw through vibration signals
Huang, Y. C. & Shin, Y. C., 2013 Aug, In: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 34, 4, p. 303-311 9 p.Research output: Contribution to journal › Article › peer-review
-
Research of ear PPG signals compared with ECG signals by empirical mode decomposition and Hilbert-Huang transform
Huang, Y. C. & Lin, C. S., 2013 Apr 30, In: Journal of Technology. 28, 1, p. 1-8 8 p.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
Simulation and experiment of langevin-type piezoelectric ultrasonic horn for micro tool motion
Huang, Y. C., Ding, G. Z., Chen, B. H. & Huang, Y. J., 2013 Aug 8, Intelligent Technologies and Engineering Systems. p. 967-974 8 p. (Lecture Notes in Electrical Engineering; vol. 234 LNEE).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
5 Citations (Scopus) -
2016
A new particle swarm optimization technique with iterative learning control for high precision motion
Huang, Y. C. & Hsu, M. C., 2016, Applied System Innovation - Proceedings of the International Conference on Applied System Innovation, ICASI 2015. Meen, T-H., Prior, S. D. & Lam, A. D. K-T. (eds.). CRC Press/Balkema, p. 1081-1086 6 p. (Applied System Innovation - Proceedings of the International Conference on Applied System Innovation, ICASI 2015).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Prognostic diagnosis of the health status of an air-turbine dental handpiece rotor by using sound and vibration signals
Yi-Cheng, H., Chang-Chih, L. & Po-Chou, C., 2016, In: Journal of Vibroengineering. 18, 3, p. 1514-1524 11 p.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
2018
Diagnosis of the hollow ball screw preload classification using machine learning
Huang, Y. C., Kao, C. H. & Chen, S. J., 2018 Jun 30, In: Applied Sciences (Switzerland). 8, 7, 1072.Research output: Contribution to journal › Article › peer-review
5 Citations (Scopus) -
Numerical simulation and experimental validation of novel hyperelastic micro-motion manipulator for water conserving device
Huang, Y. C. & Hsu, H. C., 2018 Aug 1, In: Microsystem Technologies. 24, 8, p. 3329-3339 11 p.Research output: Contribution to journal › Article › peer-review
-
Numerical simulation and experimental validation of the vibration suppression control by using input shaping technique with extended Kalman filter
Huang, Y. C., Lee, Y. L. & Ma, M. Y., 2018 Jan 1, In: Journal of Marine Science and Technology (Taiwan). 26, 5, p. 731-742 12 p.Research output: Contribution to journal › Article › peer-review
-
2019
Anticipatory iterative learning control for linear motor positioning accuracy by use of hybrid particle swarm optimization
Huang, Y. C., Hsu, S. W. & Ma, M. Y., 2019 Jan 1, In: Journal of Intelligent and Fuzzy Systems. 36, 2, p. 897-910 14 p.Research output: Contribution to journal › Article › peer-review
-
Computed tomography system for total knee replacement planning and comparison with plain radiography measured by an orthopedic surgeon
Huang, Y. J., Huang, Y. C., Wang, S. C. & Ku, M. C., 2019 Jan 1, In: Journal of Imaging Science and Technology. 63, 5, 050503.Research output: Contribution to journal › Article › peer-review
-
Labeling confidence values for wafer-handling robot arm performance using a feature-based general regression neural network and genetic algorithm
Huang, Y. C., Yang, Z. S. & Liao, H. S., 2019 Oct 1, In: Applied Sciences (Switzerland). 9, 20, 4241.Research output: Contribution to journal › Article › peer-review
Open Access -
Numerical simulation and experimental validation of heat sinks fabricated using selective laser melting for use in a compact LED recessed downlight
Huang, Y. C. & Hsu, H. C., 2019 Jan 9, In: Microsystem Technologies. 25, 1, p. 121-137 17 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
Wearable sensor for measurement of gait walking and running motion
Huang, Y. C., Chen, Y. R., Wu, H. Y. & Huang, Y. J., 2019, In: Sensors and Materials. 31, 2, p. 629-644 16 p.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
2020
Selective laser melting heat sinks under jet impingement cooling for heat dissipation of higher light output LED lighting in a limited space
Huang, Y-C. & Hsu, H-C., 2020, In: Applied Sciences (Switzerland). 10, 11Research output: Contribution to journal › Article › peer-review