Find Research Outputs

Search results

• 2011

  Finite element analysis and die design of extrusion processes of radial-finned heat sink

  Chen, D. C., Chen, J. M., Guo, M. W., Jao, C. H. & Chen, W. J., 2011 Aug 8, Advances in Materials and Processing Technologies II, AMPT 2009. p. 30-35 6 p. (Advanced Materials Research; vol. 264-265).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Heat sinks
  • Extrusion
  • Extrusion dies
  • Finite element method
  • Friction

• Robust design of ring rolling process for titanium alloy using the Taguchi method and the finite element method

  Chen, D. C., You, C. S., Guo, M. W. & Lai, B. Y., 2011 Jan 1, Advanced Design and Manufacture III, ADM2010. Trans Tech Publications Ltd, p. 177-180 4 p. (Key Engineering Materials; vol. 450).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Taguchi methods
  • Titanium alloys
  • Finite element method
  • Plastic deformation
  • titanium alloy (TiAl6V4)
  1 Citation (Scopus)

• Using an analytic hierarchy process to develop competencies on mould product creativity for vocational college students

  Chen, D-C., Chen, C. P., Lee, C. Y., You, C. S. & Jao, C. H., 2011 Dec 1, In : World Transactions on Engineering and Technology Education. 9, 1, p. 54-59 6 p.

  Research output: Contribution to journal › Article › peer-review

  • vocational college
  • Textbooks
  • Analytic hierarchy process
  • creativity
  • Students
  4 Citations (Scopus)

• Using the Taguchi method and finite element method to analyze a robust new design for titanium alloy prick hole extrusion

  Chen, D. C., You, C. S., Nian, F. L. & Guo, M. W., 2011 Jan 1, In : Procedia Engineering. 10, p. 82-87 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Taguchi methods
  • Titanium alloys
  • Extrusion
  • Finite element method
  • Plastic deformation
  7 Citations (Scopus)
• 2012

  Application of response surface methodology and elitist multi-objective hybrid particle swarm algorithm for optimization design of an air-core linear motor

  Chen, W-J., Su, W. C., Chen, D-C. & Nian, F. L., 2012 Nov 1, In : International Journal of Advancements in Computing Technology. 4, 20, p. 72-81 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Linear motors
  • Magnets
  • Sorting
  • Air
  • Multiobjective optimization

• A study on the cellphone cover-forming process of titanium alloys using the finite element method

  Chen, D-C., Chen, M. R. & Nian, F. L., 2012 Jan 1, Frontiers of Manufacturing and Design Science II. p. 1550-1554 5 p. (Applied Mechanics and Materials; vol. 121-126).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Titanium alloys
  • Finite element method
  • Stamping
  • Plastic deformation
  • Plastics

• Finite element analysis of rim ring rolling forming of bicycle aluminum alloy

  Chen, D. C., Lai, B. Y. & You, C. S., 2012 Feb 15, Materials and Manufacturing Technologies XIV. p. 231-236 6 p. (Advanced Materials Research; vol. 445).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Aluminum alloys
  • Finite element method
  • Sports
  • Pollution

• Forging process of bicycle chain wheel using experiment and finite element analysis

  Chen, D-C., Nian, F. L. & Chen, M. R., 2012 Jul 2, In : Advanced Science Letters. 9, p. 68-73 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Forging
  • bicycle
  • Finite Element Analysis
  • Bicycles
  • Wheel

• Optimization design of parameters with hybrid particle swarm optimization algorithm in multi-hole extrusion process

  Chen, W-J., Chen, D-C., Su, W. C. & Nian, F. L., 2012 Feb 2, Advances in Electronic Engineering, Communication and Management Vol. 2 - Proceedings of 2011 International Conference on Electronic Engineering, Communication and Management, EECM 2011. p. 279-284 6 p. (Lecture Notes in Electrical Engineering; vol. 140 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Extrusion
  • Particle swarm optimization (PSO)
  • Bending (forming)
  • Titanium alloys
  • Plastic deformation
  2 Citations (Scopus)

• Study of forging forming of 7075 aluminum alloy bicycle pedal

  Chen, D. C., Nian, F. L., Shiu, J. R. & Ku, W. H., 2012 Nov 26, Advanced Manufacturing Focusing on Multi-Disciplinary Technologies. p. 101-108 8 p. (Advanced Materials Research; vol. 579).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Forging
  • Aluminum alloys
  • Plastic deformation
  • Plastics
  1 Citation (Scopus)

• The effect of creative instruction on academic performance for mould manufacturing courses

  Chen, D. C., Lai, B. Y., Lee, C. Y. & Lai, G. Y., 2012 Jul 27, In : IEEE Global Engineering Education Conference, EDUCON. 6201085.

  Research output: Contribution to journal › Conference article › peer-review

  • Academic Performance
  • manufacturing
  • instruction
  • Manufacturing
  • performance
  1 Citation (Scopus)
• 2013

  Analysis of forging forming of 6061 aluminum alloy bicycle pedal

  Chen, D. C., Shiu, J. R., Nian, F. L. & Chen, M. R., 2013 Jan 24, Frontiers of Manufacturing and Design Science III. PART 1 ed. p. 31-35 5 p. (Applied Mechanics and Materials; vol. 271, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Forging
  • Aluminum alloys
  • Taguchi methods
  • Sports
  2 Citations (Scopus)

• Application of ANOVA and taguchi-based mutation particle swarm algorithm for parameters design of multi-hole extrusion process

  Chen, W. J., Su, W. C., Nian, F. L., Lin, J. R. & Chen, D. C., 2013, In : Research Journal of Applied Sciences, Engineering and Technology. 6, 13, p. 2316-2325 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Analysis of variance (ANOVA)
  • Extrusion
  • Bending (forming)
  • Taguchi methods
  • Particle swarm optimization (PSO)
  4 Citations (Scopus)

• Design and surface roughness analysis of thin-sheet plastic injection forming

  Chen, D-C., Pan, J. Y., Gao, J. W. & Chen, W-J., 2013 Aug 8, Intelligent Technologies and Engineering Systems. p. 743-753 11 p. (Lecture Notes in Electrical Engineering; vol. 234 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Plastic sheets
  • Surface roughness
  • Plastics
  • Plastic products
  • Plastics molding

• Effect of Electrode Route Motion on Electrode Wear in EDM Machining of Mold Steel

  Chen, D. C., Wang, Y. K. & Lin, G. F., 2013 Oct, In : Arabian Journal for Science and Engineering. 38, 10, p. 2793-2800 8 p.

  Research output: Contribution to journal › Article › peer-review

  • machining
  • routes
  • steels
  • electrodes
  • surface roughness
  1 Citation (Scopus)

• Optimization analysis of A7075 bicycle stem forging process

  Chen, D. C., Shiu, J. R. & Lin, J. G., 2013 Jan 1, The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales. Trans Tech Publications Ltd, p. 227-233 7 p. (Key Engineering Materials; vol. 554-557).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Forging
  • Taguchi methods
  • Structural analysis
  • Stress analysis
  1 Citation (Scopus)

• Taguchi method and genetic algorithm neural networks analysis of forging process of bicycle chain wheel

  Chen, D. C. & You, C. S., 2013 Feb 20, Innovation for Applied Science and Technology. p. 220-224 5 p. (Applied Mechanics and Materials; vol. 284-287).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Taguchi methods
  • Bicycles
  • Forging
  • Electric network analysis
  • Wheels
• 2015

  An Investigation into CIGS Thin-Films Solar Cell P2 Layer Scribing Depth and Width Using Different Laser Process Parameters

  Chen, D. C., Chen, M. F. & Chen, M. R., 2015, In : Advances in Materials Science and Engineering. 2015, 894673.

  Research output: Contribution to journal › Article › peer-review

  • Thin film solar cells
  • Lasers
  • Stainless Steel
  • Stainless steel
  • Solar cells
  1 Citation (Scopus)

• An investigation into suitable friction factor and optimized forming process of 6061 aluminum alloy bicycle stem

  Chen, D-C., Lin, J. G., Chu, Y. T. & Shiu, J. R., 2015 Feb 1, In : Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 36, 1, p. 41-48 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Bicycles
  • Aluminum alloys
  • Friction
  • Metal forming
  • Aluminum

• Finite element analysis of advanced bicycle precision brake disk forming technology

  Chen, D. C., Kang, J. H. & Lai, C. C., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 12004. (MATEC Web of Conferences; vol. 21).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Brakes
  • Finite element method
  • Modal analysis
  • Oils

• Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy

  Chen, D. C. & You, C. S., 2015 Jan 1, In : Strength of Materials. 47, 1, p. 122-127 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Aluminum alloys
  • Ductile fracture
  • Finite element method
  • Stamping
  • Forging
  1 Citation (Scopus)

• Investigation into bicycle front fork forming process of simulation and experiment

  Chen, D. C. & Ku, W. H., 2015 Jan 1, Advances in Engineering Plasticity XII. Trans Tech Publications Ltd, p. 199-204 6 p. (Key Engineering Materials; vol. 626).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bicycles
  • Forging
  • titanium alloy (TiAl6V4)
  • Experiments
  • Taguchi methods

• Slab analysis, FEM simulation and experimental verification on rotating forging of three-layer clad cylinder with constant shear friction

  Tzou, G. Y., Chen, D. C. & Lin, S. H., 2015 Apr 3, In : Advances in Materials and Processing Technologies. 1, 1-2, p. 223-233 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Forging
  • Friction
  • Finite element method
  • Torque
  • Shear stress

• Study of 6061 aluminum alloy milling using four- blade face cutter

  Chen, D-C., You, C. S., Tu, C. A. & Ni, C. H., 2015 Jan 1, Materials and Technologies in Precision Machinery. Tzou, G-Y. (ed.). Trans Tech Publications Ltd, p. 62-68 7 p. (Key Engineering Materials; vol. 661).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Milling cutters
  • Aluminum alloys
  • Finite element method
  • Aluminum
  • Wear of materials

• 嬰兒床

  Chen, D-C., 2015 Nov 1, Patent No. D171395

  Research output: Patent
• 2016

  Enhancement of extrusion die learning based on a simulation analysis

  Chen, D. C., You, C. S. & Liu, K. H., 2016 Jan 1, In : World Transactions on Engineering and Technology Education. 14, 2, p. 282-287 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Extrusion dies
  • simulation
  • Students
  • learning
  • engineer

• Finite element analysis of chip breaker geometry in turning process

  Chen, D. C., You, C. S. & Kao, S. H., 2016 Jul 1, In : Advances in Mechanical Engineering. 8, 7, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Wear of materials
  • Cutting tools
  • Finite element method
  • Geometry
  • Aluminum alloys
  3 Citations (Scopus)

• Study of piezoelectric materials combined with electromagnetic design for bicycle harvesting system

  Chen, D. C., Kao, S. H. & Huang, C. K., 2016 Apr, In : Advances in Mechanical Engineering. 8, 4, p. 1-11 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Piezoelectric materials
  • Bicycles
  • Energy harvesting
  • Electric coils
  • Magnetoelectric effects

• Study on wire rod drawing process using the rotating die

  Tzou, G. Y., Chen, D-C. & Lin, S. H., 2016 Jan 1, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 63-67 5 p. (Key Engineering Materials; vol. 716).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Wire
  • Finite element method
  • Friction
  • Angular velocity
  3 Citations (Scopus)

• 整合QFD, TRIZ及田口法研發破壞性創新之自行車鏈輪製程設計

  Chen, D-C., You, C. S., Ni, C. H. & Yu, M. J., 2016 Jan 1, In : International Journal of Systematic Innovation. 4, 1, p. 1-15 15 p.

  Research output: Contribution to journal › Article › peer-review

  • Bicycles
  • Quality Function Deployment (QFD)
  • Product development
  • Disruptive Innovation
  • Wheels
• 2017

  A block-based division reversible data hiding method in encrypted images

  Liu, W. L., Leng, H. S., Huang, C. K. & Chen, D. C., 2017 Dec 1, In : Symmetry. 9, 12, 308.

  Research output: Contribution to journal › Article › peer-review

  • Data Hiding
  • Division
  • division
  • Pixels
  • Digital storage
  5 Citations (Scopus)

• Diamond shape division reversible data hiding in encrypted images

  Huang, C. K., Chen, D. C., Liu, W. L. & Huang, S. C., 2017 Dec 1, In : ICIC Express Letters, Part B: Applications. 8, 12, p. 1559-1566 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Diamonds
  • Pixels
  • Statistical methods

• Multi-stage forging on torx-pin screw with high torque

  Tzou, G. Y., Chen, D. C. & Lin, S. H., 2017 Aug 4, In : MATEC Web of Conferences. 119, 01048.

  Research output: Contribution to journal › Conference article › peer-review

  • Forging
  • Torque
  • Finite element method
  • Needles
  • Friction
  1 Citation (Scopus)

• Optimum design of Si-Cr alloy springs for seismic vibration isolator

  Chen, D. C., Kao, S. H., Chen, L. R., Wang, S. J., Chen, C. Y. & Huang, C. K., 2017 Jan 1, Advances in Engineering Plasticity and its Application XIII. Yoshida, F. & Hamasaki, H. (eds.). Trans Tech Publications Ltd, p. 700-705 6 p. (Key Engineering Materials; vol. 725 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Stress analysis
  • Wire

• Simulation analysis of turbine blade in 3D printing aquarium

  Chen, D. C., Lai, B. Y. & Gao, F. Y., 2017 Sep 21, In : MATEC Web of Conferences. 123, 00008.

  Research output: Contribution to journal › Conference article › peer-review

  • Turbomachine blades
  • Printing
  • Turbines
  • Stress analysis
  • Product design

• Study of 6061 Aluminum Alloy Thread Turning

  Chen, D. C., You, C. S. & Yu, M. J., 2017 Feb 1, In : Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 38, 1, p. 33-40 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Aluminum alloys
  • Abrasion
  • Thread cutting
  • Cutting fluids
  • Cutting tools

• Using AHP to critical thinking develop in precision measurement of vocational college students

  Chen, D. C., You, C. S., Gao, F. Y. & Lai, B. Y., 2017 Jan 1, Emerging Technologies for Education - 1st International Symposium, SETE 2016 Held in Conjunction with ICWL 2016, Revised Selected Papers. Gennari, R., Cao, Y., Huang, Y-M., Wu, W. & Xie, H. (eds.). Springer Verlag, p. 117-122 6 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10108 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Critical Thinking
  • Analytic Hierarchy Process
  • Analytic hierarchy process
  • Students
  • Content Analysis

• Using AHP to project-based learning develop in machinery manufacturing of technology universities students

  Chen, D. C., You, C. S. & Huang, Y. C., 2017 Jan 1, Emerging Technologies for Education - 2nd International Symposium, SETE 2017, Held in Conjunction with ICWL 2017, Revised Selected Papers. Huang, T-C., Lau, R., Huang, Y-M., Spaniol, M. & Yuen, C-H. (eds.). Springer Verlag, p. 154-160 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10676 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Project-based Learning
  • Analytic Hierarchy Process
  • Universities
  • Analytic hierarchy process
  • Manufacturing

• Vibration characteristics and modal analysis of a grinding machine

  Chen, D. C., Chen, M. F., Kang, J. H. & Lai, C. C., 2017 Dec 1, In : Journal of Vibroengineering. 19, 8, p. 6288-6300 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Grinding machines
  • Modal analysis
  • Spectrum analyzers
  • Finite element method
  • Machine design

• Warpage Analysis of a Plastic Spur Gear Injection Molding

  Chen, D. C., Huang, C. K. & Lin, J. W., 2017 Oct 2, In : Smart Science. 5, 4, p. 206-213 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Injection Molding
  • Spur gears
  • Plastics
  • Injection molding
  • Trace
  3 Citations (Scopus)
• 2018

  Application of ductile fracture criterion for tensile test of zirconium alloy 702

  Chen, D. C., Chang, D. Y., Chen, F. H. & Kuo, T. Y., 2018 Mar 1, In : Scientia Iranica. 25, 2B, p. 824-829 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Zirconium alloys
  • Ductile fracture
  • Finite element method
  • Fracture energy
  • Materials properties
  2 Citations (Scopus)

• Developing the capability indicators for CNC machine R&D staff in Taiwan

  Chen, D. C. & Chen, T. W., 2018 Jan 1, Innovative Technologies and Learning - First International Conference, ICITL 2018, Proceedings. Lin, L., Wu, T-T., Huang, Y-M., Huang, Y-M., Starcic, A. I. & Shadieva, R. (eds.). Springer Verlag, p. 223-230 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11003 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Taiwan
  • Industry
  • Questionnaire
  • Wilcoxon Signed Rank Test
  • Skills

• Finite element simulation and analysis of saw cutting

  Chen, D. C., Chen, Y. H., You, C. S. & Huang, S. H., 2018 Jul 31, In : MATEC Web of Conferences. 185, 00021.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Sawing
  • Aluminum
  • Structural design
  • Wear of materials
  • Finite element method

• Generalized optimizations of two-stage forging of micro/meso copper fastener

  Lin, S. H., Chai, U. C., Tzou, G. Y. & Chen, D. C., 2018 Jul 31, In : MATEC Web of Conferences. 185, 00002.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Fasteners
  • Forging
  • Copper
  • Taguchi methods
  • Friction

• Integration of meta-analysis, analytic hierarchy process, and Taguchi method to examine tool wear

  Chen, D. C., You, C. S. & Ting, J. C., 2018 Sep 1, In : Journal of Technology. 33, 3, p. 155-164 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Taguchi methods
  • Analytic hierarchy process
  • Wear of materials
  • Cytokines
  • Cutting tools

• Strengthen entrepreneurial capacity in entrepreneurial competitions

  Chen, S. C., Hsiao, H. C., Chang, J. C., Chou, C. M. & Chen, D. C., 2018 Jan 1, Proceedings of the 15th International Conference on Cognition and Exploratory Learning in the Digital Age, CELDA 2018. Sampson, D. G., Sampson, D. G., Isaias, P., Ifenthaler, D., Ifenthaler, D. & Rodrigues, L. (eds.). IADIS Press, p. 363-366 4 p. (Proceedings of the 15th International Conference on Cognition and Exploratory Learning in the Digital Age, CELDA 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • entrepreneurship
  • Students
  • Problem-Based Learning
  • student
  • Soil conservation

• Study of membrane restrictors in hydrostatic bearing

  Chen, D. C., Chen, M. F., Pan, C. H. & Pan, J. Y., 2018 Sep 1, In : Advances in Mechanical Engineering. 10, 9

  Research output: Contribution to journal › Article › peer-review

  • Hydrostatic bearings
  • Membranes
  • Oils
  • Diaphragms
  • Feedback
  1 Citation (Scopus)

• Study of Storage Shelves Deformation Using Finite Element Analysis during Seismic

  Chen, D. C. & Kuo, T. Y., 2018 Apr 23, In : MATEC Web of Conferences. 167, 03008.

  Research output: Contribution to journal › Conference article › peer-review

  • Finite element method
  • Earthquakes
  • Industry 4.0
  • Warehouses
  • Industry
• 2019

  A Study Regarding the Gap between the Industry and Academia Expectations for College Student's Employability

  Sui, F. M., Chang, J. C., Hsiao, H. C., Chen, S. C. & Chen, D. C., 2019 Jan 9, 2018 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2018. IEEE Computer Society, p. 1573-1577 5 p. 8607269. (IEEE International Conference on Industrial Engineering and Engineering Management; vol. 2019-December).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Employability
  • College Students
  • Students
  • Education
  • Word processing
  2 Citations (Scopus)

• Development of assessment indicators for measuring the student learning effects of artificial intelligence-based robot design

  Shyr, W-J., Yang, F. C., Liu, P. W., Hsieh, Y. M., You, C. S. & Chen, D-C., 2019 Jul 1, In : Computer Applications in Engineering Education. 27, 4, p. 863-868 6 p.

  Research output: Contribution to journal › Article › peer-review

  • learning success
  • robot
  • artificial intelligence
  • Artificial intelligence
  • Students
  1 Citation (Scopus)