• 210 Citations
  • 9 h-Index
1991 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1991 2019

  • 210 Citations
  • 9 h-Index
  • 33 Article
  • 29 Conference contribution
  • 2 Paper
  • 1 Conference article
2019

Anticipatory iterative learning control for linear motor positioning accuracy by use of hybrid particle swarm optimization

Huang, Y. C., Hsu, S. W. & Ma, M. Y., 2019 Jan 1, In : Journal of Intelligent and Fuzzy Systems. 36, 2, p. 897-910 14 p.

Research output: Contribution to journalArticle

Linear Motor
Iterative Learning Control
Hybrid Optimization
Linear motors
Particle swarm optimization (PSO)
Knee prostheses
surgeons
orthopedics
Radiography
Orthopedics
Open Access
robot arms
genetic algorithms
Labeling
marking
Logistics
heat sinks
Heat sinks
Light emitting diodes
Melting
light emitting diodes
1 Citation (Scopus)

Wearable sensor for measurement of gait walking and running motion

Huang, Y. C., Chen, Y. R., Wu, H. Y. & Huang, Y. J., 2019 Jan 1, In : Sensors and Materials. 31, 2, p. 629-644 16 p.

Research output: Contribution to journalArticle

Open Access
gait
walking
pitch (inclination)
yaw
Units of measurement
2018
3 Citations (Scopus)

Diagnosis of the hollow ball screw preload classification using machine learning

Huang, Y. C., Kao, C. H. & Chen, S. J., 2018 Jun 30, In : Applied Sciences (Switzerland). 8, 7, 1072.

Research output: Contribution to journalArticle

Ball screws
machine learning
screws
Learning systems
balls
Extended Kalman filters
Kalman filter
vibration
Computer simulation
simulation
2017
2 Citations (Scopus)

Iterative learning control bandwidth tuning using the particle swarm optimization technique for high precision motion

Huang, Y. C., Su, Y. W. & Chuo, P. C., 2017 Feb 1, In : Microsystem Technologies. 23, 2, p. 361-370 10 p.

Research output: Contribution to journalArticle

Particle swarm optimization (PSO)
learning
error signals
Tuning
tuning
3 Citations (Scopus)
heat sinks
Heat sinks
Thermoanalysis
Light emitting diodes
thermal analysis

Numerical simulation and experimental validation of novel hyperelastic micro-motion manipulator for water conserving device

Huang, Y-C. & Hsu, H. C., 2017 Dec 21, (Accepted/In press) In : Microsystem Technologies. p. 1-11 11 p.

Research output: Contribution to journalArticle

Manipulators
manipulators
inlet pressure
Water
Computer simulation

Particle swarm optimization on designing anticipatory iterative learning controller for positioning accuracy

Huang, Y. C. & Hsu, S. W., 2017 Jun 7, 2017 3rd International Conference on Control, Automation and Robotics, ICCAR 2017. Institute of Electrical and Electronics Engineers Inc., p. 483-486 4 p. 7942743. (2017 3rd International Conference on Control, Automation and Robotics, ICCAR 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iterative Learning Control
Particle swarm optimization (PSO)
Positioning
Particle Swarm Optimization
Controller
2016

A new particle swarm optimization technique with iterative learning control for high precision motion

Huang, Y. C. & Hsu, M. C., 2016 Jan 1, Applied System Innovation - Proceedings of the International Conference on Applied System Innovation, ICASI 2015. Lam, A. D. K-T., Prior, S. D. & Meen, T-H. (eds.). CRC Press/Balkema, p. 1081-1086 6 p. (Applied System Innovation - Proceedings of the International Conference on Applied System Innovation, ICASI 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iterative Learning Control
Particle swarm optimization (PSO)
Optimization Techniques
Particle Swarm Optimization
Motion
1 Citation (Scopus)

Prognostic diagnosis of the health status of an air-turbine dental handpiece rotor by using sound and vibration signals

Yi-Cheng, H., Chang-Chih, L. & Po-Chou, C., 2016 Jan 1, In : Journal of Vibroengineering. 18, 3, p. 1514-1524 11 p.

Research output: Contribution to journalArticle

Compressed air motors
Vibrations (mechanical)
Rotors
Health
Acoustic waves
2014
4 Citations (Scopus)

Adaptive zero-phase filtering bandwidth of iterative learning control by particle swarm optimization

Su, Y. W., Chao, J. A. & Huang, Y-C., 2014 Jan 1, Proceedings of the 2nd International Conference on Intelligent Technologies and Engineering Systems, ICITES 2013. Chen, C-Y., Yang, C-F. & Juang, J. (eds.). Springer Verlag, p. 1031-1037 7 p. (Lecture Notes in Electrical Engineering; vol. 293).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Particle swarm optimization (PSO)
Bandwidth
Butterworth filters
Error compensation
Controllers
3 Citations (Scopus)

Ball nut preload diagnosis of the hollow ball screw through sensed current signals

Huang, Y. C., Sun, S. L. & Peng, K. H., 2014 Jan 1, In : International Journal of Automation and Smart Technology. 4, 3, p. 134-142 9 p.

Research output: Contribution to journalArticle

Ball screws
Entropy
Health
Cooling

Dynamic motion and modal analysis simulation for the balance mass of the crankshaft of a two-cylinder reciprocating air compressor

Huang, Y-C. & Lin, D. Y., 2014 Mar 7, Sensors, Mechatronics and Automation. p. 696-699 4 p. (Applied Mechanics and Materials; vol. 511-512).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crankshafts
Modal analysis
Engine cylinders
Compressors
Reciprocating compressors
7 Citations (Scopus)
Particle swarm optimization (PSO)
Control systems
Experiments
Derivatives
Controllers

Study on Iterative Learning Control bandwidth tuning using particle swarm optimization technique for high precision motion

Huang, Y-C. & Su, Y. W., 2014 Nov 5, Proceedings - 2014 International Conference on Information Science, Electronics and Electrical Engineering, ISEEE 2014. Li, S., Cheng, Y., Dai, Y. & Jiang, X. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 2033-2037 5 p. 6946280. (Proceedings - 2014 International Conference on Information Science, Electronics and Electrical Engineering, ISEEE 2014; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Particle swarm optimization (PSO)
Tuning
Bandwidth
Controllers
Butterworth filters
2013

A quality monitoring online system using an early warning abnormal trend distribution: A thickness measurement case study using a LVDT

Chuo, P. C., Huang, Y. C., Chiu, M. C. & Cheng, H. C., 2013 Oct 4, Materials, Mechatronics and Automation II. p. 120-127 8 p. (Advanced Materials Research; vol. 740).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thickness measurement
Online systems
Monitoring
HTML
Alarm systems
2 Citations (Scopus)

Design and experiment of iterative learning controller based on particle swarm optimization approach with new bounded constraints technique

Huang, Y. C., Li, Y. H. & Li, S. T., 2013 Feb 20, Innovation for Applied Science and Technology. p. 2233-2237 5 p. (Applied Mechanics and Materials; vol. 284-287).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Particle swarm optimization (PSO)
Controllers
Derivatives
Experiments
Linear motors
Linear Motor
PID Control
Linear motors
Three term control systems
Particle swarm optimization (PSO)

Precision motion of iterative learning controller using adaptive filter bandwidth tuning by improved particle swarm optimization technique

Huang, Y-C., Li, S. T. & Peng, K. H., 2013 Oct 22, Materials and Diverse Technologies in Industry and Manufacture. p. 349-353 5 p. (Applied Mechanics and Materials; vol. 376).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Adaptive filters
Particle swarm optimization (PSO)
Tuning
Bandwidth
Controllers

Prognostic diagnosis of hollow ball screw pretension on preload loss through sensed vibration signals

Huang, Y. C., Chen, Y. S., Sun, S. L. & Peng, K. H., 2013 Aug 8, Intelligent Technologies and Engineering Systems. p. 959-966 8 p. (Lecture Notes in Electrical Engineering; vol. 234 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ball screws
Cooling systems
Machine tools
Fast Fourier transforms
Thermal effects
Ball screws
Entropy
Mathematical transformations
Decomposition
Pattern matching

Research of ear PPG signals compared with ECG signals by empirical mode decomposition and Hilbert-Huang transform

Huang, Y. C. & Lin, C. S., 2013 Apr 30, In : Journal of Technology. 28, 1, p. 1-8 8 p.

Research output: Contribution to journalArticle

Electrocardiography
Decomposition
Aging of materials
Health
Mathematical transformations
5 Citations (Scopus)

Simulation and experiment of langevin-type piezoelectric ultrasonic horn for micro tool motion

Huang, Y. C., Ding, G. Z., Chen, B. H. & Huang, Y. J., 2013 Aug 8, Intelligent Technologies and Engineering Systems. p. 967-974 8 p. (Lecture Notes in Electrical Engineering; vol. 234 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Piezoelectric transducers
Ultrasonics
Vibrations (mechanical)
Experiments
Vibrators
2012

Development of a piezoelectric micro-cutting system

Huang, Y-C. & Hsu, C. B., 2012 Dec 1, In : Journal of Technology. 27, 4, p. 171-178 8 p.

Research output: Contribution to journalArticle

Microdissection
Ultrasonics
Tissue
Dissection
Cutting tools
1 Citation (Scopus)

Dynamic balancing modal analysis and vibration suppressing design for reciprocating compressor crankshaft

Huang, Y-C. & Lee, F. Y., 2012 Mar 16, Mechatronics and Applied Mechanics. p. 996-999 4 p. (Applied Mechanics and Materials; vol. 157-158).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reciprocating compressors
Crankshafts
Modal analysis
Vibrations (mechanical)
Compressors

Numerical simulation and experimental study on bonding tool design of thermosonic transducer for Flip-Chip bonding

Huang, Y. C. & Li, K. Y., 2012 Mar 16, Mechatronics and Applied Mechanics. Vol. 157-158. p. 1670-1673 4 p. (Applied Mechanics and Materials; vol. 157-158).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transducers
Ultrasonic transducers
Computer simulation
Mountings
Light emitting diodes
3 Citations (Scopus)
Hinges
Design of experiments
Natural frequencies
Piezoelectric actuators
Analysis of variance (ANOVA)
2011
3 Citations (Scopus)

Diagnosis of ball screw preload loss by vibration signals through the Hilbert-Huang transform and multiscale measure

Shin, Y. C., Huang, Y-C. & Chao, J. A., 2011 Jul 22, Information Technology for Manufacturing Systems II. p. 636-641 6 p. (Applied Mechanics and Materials; vol. 58-60).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ball screws
Entropy
Mathematical transformations
Machine tools
Decomposition

Improved particle swarm optimization by updating constraints of PID control for real time linear motor positioning

Li, Y. H., Huang, Y-C. & Chao, J. A., 2011 Dec 1, Communication Systems and Information Technology - Selected Papers from the 2011 International Conference on Electric and Electronics, EEIC 2011. VOL. 4 ed. p. 515-523 9 p. (Lecture Notes in Electrical Engineering; vol. 100 LNEE, no. VOL. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Linear motors
Three term control systems
Particle swarm optimization (PSO)
Synchronous motors
Control systems
2010
1 Citation (Scopus)

Improved Particle Swarm Optimization approach of PID controller design for machine tool positioning

Ma, M. Y., Chao, J. A. & Huang, Y. C., 2010 Sep 3, 3CA 2010 - 2010 International Symposium on Computer, Communication, Control and Automation. p. 450-453 4 p. 5533768. (3CA 2010 - 2010 International Symposium on Computer, Communication, Control and Automation; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machine tools
Particle swarm optimization (PSO)
Controllers
Three term control systems
MATLAB
15 Citations (Scopus)

Prognostic experiment for ball screw preload loss of machine tool through the Hilbert-Huang transform and multiscale entropy method

Chang, J. L., Chao, J. A., Huang, Y. C. & Chen, J. S., 2010 Aug 24, 2010 IEEE International Conference on Information and Automation, ICIA 2010. p. 376-380 5 p. 5512064. (2010 IEEE International Conference on Information and Automation, ICIA 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ball screws
Machine tools
Entropy
Experiments
Natural frequencies
2009
1 Citation (Scopus)

3D finite element analysis and experiment on the piezoelectric ultrasonic transducer motion

Hsiao, F. S., Chao, J. A. & Huang, Y. C., 2009 Dec 1, 2009 IEEE International Conference on Mechatronics and Automation, ICMA 2009. p. 158-163 6 p. 5246089

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic transducers
Piezoelectric transducers
Transducers
Finite element method
Experiments

FEM analysis and experimental verification of the ultrasonic transducer for thermosonic flip-chip bonding machine

Huang, Y. C. & Hsiao, F. S., 2009 Nov 23, 2009 IEEE International Conference on Information and Automation, ICIA 2009. p. 773-777 5 p. 5205025. (2009 IEEE International Conference on Information and Automation, ICIA 2009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic transducers
Finite element method
Transducers
Gold
Wire
3 Citations (Scopus)

Robust tracking control of a piezodriven monolithic flexure-hinge stage

Huang, Y. C. & Cheng, C. H., 2009 Jun 1, In : Science in China, Series G: Physics, Mechanics and Astronomy. 52, 6, p. 926-934 9 p.

Research output: Contribution to journalArticle

hinges
flexing
disturbances
learning
controllers
4 Citations (Scopus)

Tracking control of a piezo-actuated stage based on a frictional model

Huang, Y-C. & Lin, M. S., 2009 May 1, In : Asian Journal of Control. 11, 3, p. 287-294 8 p.

Research output: Contribution to journalArticle

Piezoelectric actuators
Time delay
Friction
Parameterization
Transfer functions
2008
2 Citations (Scopus)

Experiment study on bonding tool of thermosonic transducer for flip-chip bonding

Huang, Y-C., Li, R. Y. & Chen, C. H., 2008 Sep 30, Proceedings of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2008. p. 1002-1007 6 p. 4601798. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transducers
Experiments
Ultrasonics
Light emitting diodes
Taguchi methods

Study on a PZT actuator based on pre-stressed mechanism

Huang, Y-C., Chao, J. A. & Hsiang-Jung, L., 2008 Sep 30, Proceedings of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2008. p. 722-727 6 p. 4601749. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Actuators
Piezoelectric ceramics
Tensile stress
Dynamic response
Natural frequencies
13 Citations (Scopus)

The morphology of etch pits on a sapphire surface

Liu, C. M., Chen, J. C., Huang, Y. C. & Hsieh, H. L., 2008 Feb 1, In : Journal of Physics and Chemistry of Solids. 69, 2-3, p. 572-575 4 p.

Research output: Contribution to journalArticle

Aluminum Oxide
Sapphire
sapphire
Etching
etching
2007
2 Citations (Scopus)

Development of an innovative pre-stressed PZT actuator by FEA and experiment verification

Huang, Y-C. & Chen, C. F., 2007 Dec 1, 2007 IEEE International Symposium on Industrial Electronics, ISIE 2007, Proceedings. p. 1452-1457 6 p. 4374815. (IEEE International Symposium on Industrial Electronics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Actuators
Finite element method
Natural frequencies
Piezoelectric ceramics
Experiments

Fabrication study of a LED thermosonic flip chip bonding apparatus

Huang, Y-C., Li, K. Y., Hsiao, F. S. & Chen, C. H., 2007 Dec 1, Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007. 4280023. (Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Light emitting diodes
Ultrasonics
Fabrication
Display devices
Taguchi methods

The study of a new structure of fiber Bragg grating with FFPI filter for force sensing

Huang, Y. C., Tsai, J. L. & Lee, F. Y., 2007 Dec 1, Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007. 4280006. (Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fiber Bragg gratings
Fibers
Intelligent materials
Multimode fibers
Strain measurement
2006

Design and analysis of an innovative PZT actuator by FEA and experiment verification

Huang, Y-C., Chen, C. F. & Hsu, C. W., 2006 Dec 1, Institute of Applied Mechanics - 17th International Conference on Adaptive Structures and Technologies, ICAST 2006. p. 331-337 7 p. (Institute of Applied Mechanics - 17th International Conference on Adaptive Structures and Technologies, ICAST 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Actuators
Finite element method
Piezoelectric ceramics
Experiments
Controllers

Design of innovative LED micro structure inspection apparatus by piezo servo system

Huang, Y. C., Chuang, K. C. & Lin, M. S., 2006 Sep 1, In : Hangkong Taikong ji Minhang Xuekan/Journal of Aeronautics, Astronautics and Aviation. 38 A, 3, p. 191-198 8 p.

Research output: Contribution to journalArticle

Servomechanisms
Light emitting diodes
Inspection
Microstructure
Inspection equipment

Research on loading of the soft and hard tissues based on water hydraulic system with fiber bragg grating sensing

Huang, Y-C., Chen, H. Y. & Tseng, Y. L., 2006 Dec 1, 2006 1st IEEE Conference on Industrial Electronics and Applications. 4025849. (2006 1st IEEE Conference on Industrial Electronics and Applications).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fiber Bragg gratings
Hydraulics
Tissue
Water
Lead screws
2005
9 Citations (Scopus)

Inspecting LED micro structure by piezo servo system

Huang, Y-C., Chuang, K. C., Lin, M. S. & Chen, C. F., 2005 Dec 1, Proceedings of the 2005 IEEE International Conference on Mechatronics, ICM '05. p. 151-156 6 p. 1529244. (Proceedings of the 2005 IEEE International Conference on Mechatronics, ICM '05; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Servomechanisms
Diodes
Microstructure
Inspection
Inspection equipment