• 257 Citations
  • 9 h-Index
19992019
If you made any changes in Pure these will be visible here soon.

Research Output 1999 2019

  • 257 Citations
  • 9 h-Index
  • 50 Article
  • 31 Conference contribution
  • 10 Conference article
  • 2 Paper
Filter
Conference contribution
2019
1 Citation (Scopus)

A Study Regarding the Gap between the Industry and Academia Expectations for College Student's Employability

Sui, F. M., Chang, J. C., Hsiao, H. C., Chen, S. C. & Chen, D-C., 2019 Jan 9, 2018 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2018. IEEE Computer Society, p. 1573-1577 5 p. 8607269. (IEEE International Conference on Industrial Engineering and Engineering Management; vol. 2019-December).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Education
Word processing
Industry
Application programs

Employability Table for Mechanical and Mechanical College Students in Science and Technology Colleges After Graduation: Analysis of Employability of Graduates and Employers

Chen, D. C., Hsiao, H. C., Chang, J. C., Chen, S. C., Gao, Y. C., Guo, J. Y. & Chen, Y. H., 2019 Jan 1, Innovative Technologies and Learning - 2nd International Conference, ICITL 2019, Proceedings. Rønningsbakk, L., Wu, T-T., Sandnes, F. E. & Huang, Y-M. (eds.). Springer, p. 836-846 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11937 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Table
Mechanical engineering
Students
Self-assessment
Engineering
2018

Developing the capability indicators for CNC machine R&D staff in Taiwan

Chen, D. C. & Chen, T. W., 2018 Jan 1, Innovative Technologies and Learning - First International Conference, ICITL 2018, Proceedings. Lin, L., Wu, T-T., Huang, Y-M., Huang, Y-M., Starcic, A. I. & Shadieva, R. (eds.). Springer Verlag, p. 223-230 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11003 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taiwan
Industry
Questionnaire
Wilcoxon Signed Rank Test

Strengthen entrepreneurial capacity in entrepreneurial competitions

Chen, S. C., Hsiao, H. C., Chang, J. C., Chou, C. M. & Chen, D. C., 2018 Jan 1, Proceedings of the 15th International Conference on Cognition and Exploratory Learning in the Digital Age, CELDA 2018. Sampson, D. G., Sampson, D. G., Isaias, P., Ifenthaler, D., Ifenthaler, D. & Rodrigues, L. (eds.). IADIS Press, p. 363-366 4 p. (Proceedings of the 15th International Conference on Cognition and Exploratory Learning in the Digital Age, CELDA 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

entrepreneurship
Students
student
learning
Taiwan
2017

Optimum design of Si-Cr alloy springs for seismic vibration isolator

Chen, D. C., Kao, S. H., Chen, L. R., Wang, S. J., Chen, C. Y. & Huang, C. K., 2017 Jan 1, Advances in Engineering Plasticity and its Application XIII. Yoshida, F. & Hamasaki, H. (eds.). Trans Tech Publications Ltd, p. 700-705 6 p. (Key Engineering Materials; vol. 725 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stress analysis
Wire
Optimum design

Using AHP to critical thinking develop in precision measurement of vocational college students

Chen, D. C., You, C. S., Gao, F. Y. & Lai, B. Y., 2017 Jan 1, Emerging Technologies for Education - 1st International Symposium, SETE 2016 Held in Conjunction with ICWL 2016, Revised Selected Papers. Gennari, R., Cao, Y., Huang, Y-M., Wu, W. & Xie, H. (eds.). Springer Verlag, p. 117-122 6 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10108 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Critical Thinking
Analytic hierarchy process
Analytic Hierarchy Process
Students
Content Analysis

Using AHP to project-based learning develop in machinery manufacturing of technology universities students

Chen, D. C., You, C. S. & Huang, Y. C., 2017 Jan 1, Emerging Technologies for Education - 2nd International Symposium, SETE 2017, Held in Conjunction with ICWL 2017, Revised Selected Papers. Huang, T-C., Lau, R., Huang, Y-M., Spaniol, M. & Yuen, C-H. (eds.). Springer Verlag, p. 154-160 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10676 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Project-based Learning
Analytic hierarchy process
Analytic Hierarchy Process
Machinery
Manufacturing
2016
3 Citations (Scopus)

Study on wire rod drawing process using the rotating die

Tzou, G. Y., Chen, D-C. & Lin, S. H., 2016 Jan 1, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 63-67 5 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wire
Finite element method
Friction
Angular velocity
2015

Finite element analysis of advanced bicycle precision brake disk forming technology

Chen, D. C., Kang, J. H. & Lai, C. C., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 12004. (MATEC Web of Conferences; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Brakes
Finite element method
Modal analysis
Braking

Investigation into bicycle front fork forming process of simulation and experiment

Chen, D. C. & Ku, W. H., 2015 Jan 1, Advances in Engineering Plasticity XII. Trans Tech Publications Ltd, Vol. 626. p. 199-204 6 p. (Key Engineering Materials; vol. 626).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Forging
Experiments
Taguchi methods
Titanium alloys

Study of 6061 aluminum alloy milling using four- blade face cutter

Chen, D-C., You, C. S., Tu, C. A. & Ni, C. H., 2015 Jan 1, Materials and Technologies in Precision Machinery. Tzou, G-Y. (ed.). Trans Tech Publications Ltd, p. 62-68 7 p. (Key Engineering Materials; vol. 661).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Milling cutters
Aluminum alloys
Finite element method
Aluminum
Wear of materials
2014

Analysis of insulating object plastic injection forming of bicycle dynamo hub power connector

Chen, D-C., Jao, C. H. & Huang, C. K., 2014 Jan 1, Metal Forming 2014. Fratini, L. & Micari, F. (eds.). Trans Tech Publications Ltd, p. 791-797 7 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Plastics
Global warming
Industry
Welds
2 Citations (Scopus)

An investigation into optimized Ti-6Al-4V titanium alloy equal channel angular extrusion process

Chen, D-C., Li, Y. J. & Tzou, G. Y., 2014 Jan 1, Applied Science and Precision Engineering Innovation. p. 181-186 6 p. (Applied Mechanics and Materials; vol. 479-480).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium alloys
Extrusion
Plastic deformation
Taguchi methods
Processing

Finite element analysis and mold design of forging process of highway bicycle pedal

Chen, D. C., Chen, W. J., Hong, T. L., Chen, S. H., Lin, Y. X. & Tsai, M. J., 2014 Jan 7, Advances in Materials and Processing Technologies XV. p. 63-69 7 p. (Materials Science Forum; vol. 773-774).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

pedals
bicycle
Bicycles
forging
Forging
2013
2 Citations (Scopus)

Analysis of forging forming of 6061 aluminum alloy bicycle pedal

Chen, D. C., Shiu, J. R., Nian, F. L. & Chen, M. R., 2013 Jan 24, Frontiers of Manufacturing and Design Science III. PART 1 ed. p. 31-35 5 p. (Applied Mechanics and Materials; vol. 271, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Forging
Aluminum alloys
Taguchi methods
Sports

Design and surface roughness analysis of thin-sheet plastic injection forming

Chen, D-C., Pan, J. Y., Gao, J. W. & Chen, W-J., 2013 Aug 8, Intelligent Technologies and Engineering Systems. p. 743-753 11 p. (Lecture Notes in Electrical Engineering; vol. 234 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic sheets
Surface roughness
Plastics
Plastics molding
Plastic products
1 Citation (Scopus)

Optimization analysis of A7075 bicycle stem forging process

Chen, D-C., Shiu, J. R. & Lin, J. G., 2013 Jul 29, The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales. p. 227-233 7 p. (Key Engineering Materials; vol. 554-557).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Forging
Taguchi methods
Stress analysis
Structural analysis

Taguchi method and genetic algorithm neural networks analysis of forging process of bicycle chain wheel

Chen, D. C. & You, C. S., 2013 Feb 20, Innovation for Applied Science and Technology. p. 220-224 5 p. (Applied Mechanics and Materials; vol. 284-287).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taguchi methods
Bicycles
Electric network analysis
Forging
Wheels
2012

A study on the cellphone cover-forming process of titanium alloys using the finite element method

Chen, D-C., Chen, M. R. & Nian, F. L., 2012 Jan 1, Frontiers of Manufacturing and Design Science II. p. 1550-1554 5 p. (Applied Mechanics and Materials; vol. 121-126).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium alloys
Finite element method
Stamping
Plastic deformation
Plastics

Finite element analysis of rim ring rolling forming of bicycle aluminum alloy

Chen, D. C., Lai, B. Y. & You, C. S., 2012 Feb 15, Materials and Manufacturing Technologies XIV. p. 231-236 6 p. (Advanced Materials Research; vol. 445).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Aluminum alloys
Finite element method
Sports
Plastic deformation
2 Citations (Scopus)

Optimization design of parameters with hybrid particle swarm optimization algorithm in multi-hole extrusion process

Chen, W-J., Chen, D-C., Su, W. C. & Nian, F. L., 2012 Feb 2, Advances in Electronic Engineering, Communication and Management Vol. 2 - Proceedings of 2011 International Conference on Electronic Engineering, Communication and Management, EECM 2011. p. 279-284 6 p. (Lecture Notes in Electrical Engineering; vol. 140 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Particle swarm optimization (PSO)
Extrusion
Bending (forming)
Titanium alloys
Plastic deformation
1 Citation (Scopus)

Study of forging forming of 7075 aluminum alloy bicycle pedal

Chen, D. C., Nian, F. L., Shiu, J. R. & Ku, W. H., 2012 Nov 26, Advanced Manufacturing Focusing on Multi-Disciplinary Technologies. p. 101-108 8 p. (Advanced Materials Research; vol. 579).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Forging
Aluminum alloys
Plastic deformation
Plastics
2011

Finite element analysis and die design of extrusion processes of radial-finned heat sink

Chen, D. C., Chen, J. M., Guo, M. W., Jao, C. H. & Chen, W. J., 2011 Aug 8, Advances in Materials and Processing Technologies II, AMPT 2009. p. 30-35 6 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat sinks
Extrusion dies
Extrusion
Finite element method
Friction
1 Citation (Scopus)

Robust design of ring rolling process for titanium alloy using the Taguchi method and the finite element method

Chen, D. C., You, C. S., Guo, M. W. & Lai, B. Y., 2011 Jan 5, Advanced Design and Manufacture III, ADM2010. p. 177-180 4 p. (Key Engineering Materials; vol. 450).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taguchi methods
Titanium alloys
Plastic deformation
Finite element method
Loads (forces)
2010

Finite element analysis and die design of non-specific engineering structure of aluminum alloy during extrusion

Chen, D-C. & Lu, Y. Y., 2010 Sep 3, NUMIFORM 2010 - Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor O. C. Zienkiewicz (1921-2009), Volume 1 and 2. p. 1055-1059 5 p. (AIP Conference Proceedings; vol. 1252).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

aluminum alloys
engineering
billets
plastics
computer programs
1 Citation (Scopus)

Finite element simulations of A1100 / A3003 (A6063) sandwich sheet rolling processing

Chen, D. C. & Cao, J. H., 2010 Aug 16, Advances in Materials Processing IX. p. 51-56 6 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum alloys
Processing
Loads (forces)
Plastic deformation
Plastics

Rigid-plastic finite element analysis of cross wedge rolling

Chen, D-C., You, C. S., Lai, G. N. & Ji, S. C., 2010 Aug 17, PRICM7. p. 1610-1613 4 p. (Materials Science Forum; vol. 654-656).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

wedges
Plastic deformation
plastics
Plastics
Finite element method
2008
2 Citations (Scopus)

A finite element investigation into the changing channel angular extrusion of brass alloy

Chen, D. G., Wang, J. C. & Tzou, G. Y., 2008 Jan 1, Advanced Manufacture: Focusing on New and Emerging Technologies - Selected, peer Reviewed Papers from the 2007 International Conference on Advanced Manufacture. Trans Tech Publications Ltd, p. 90-95 6 p. (Materials Science Forum; vol. 594).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

brasses
Brass
Extrusion
billets
Plastic deformation
2007

Analysis of porous beams during H-profiled rolling forming using the finite element method

Chen, D. C. & Chen, C. F., 2007 Dec 1, Computational Plasticity - Fundamentals and Applications, COMPLAS IX. PART 2 ed. p. 761-765 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite Element Method
Finite element method
Stress concentration
Plastic deformation
Finite Element
2 Citations (Scopus)

Design of titanium alloy superplastic blow-forming in ellip-cylindrical die using Taguchi method

Chen, D-C., Lin, J. Y., Jheng, M. W. & Chen, J. M., 2007 Dec 1, Proceedings of the 35th International MATADOR 2007 Conference. p. 105-109 5 p. (Proceedings of the 35th International MATADOR 2007 Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium sheet
Taguchi methods
Titanium alloys
Processing
Friction

Use of taguchi method to study a robust design for H-sectioned porous beams during rolling

Chen, D-C. & Chen, C. F., 2007 Dec 1, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 3 ed. Vol. 561-565. p. 1845-1848 4 p. (Materials Science Forum; vol. 561-565, no. PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taguchi methods
Flanges
Plastic deformation
Friction
Processing