• 257 Citations
  • 9 h-Index
19992019
If you made any changes in Pure these will be visible here soon.

Research Output 1999 2019

  • 257 Citations
  • 9 h-Index
  • 50 Article
  • 31 Conference contribution
  • 10 Conference article
  • 2 Paper
2019
1 Citation (Scopus)

A Study Regarding the Gap between the Industry and Academia Expectations for College Student's Employability

Sui, F. M., Chang, J. C., Hsiao, H. C., Chen, S. C. & Chen, D-C., 2019 Jan 9, 2018 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2018. IEEE Computer Society, p. 1573-1577 5 p. 8607269. (IEEE International Conference on Industrial Engineering and Engineering Management; vol. 2019-December).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Education
Word processing
Industry
Application programs

Development of assessment indicators for measuring the student learning effects of artificial intelligence-based robot design

Shyr, W-J., Yang, F. C., Liu, P. W., Hsieh, Y. M., You, C. S. & Chen, D-C., 2019 Jul 1, In : Computer Applications in Engineering Education. 27, 4, p. 863-868 6 p.

Research output: Contribution to journalArticle

learning success
artificial intelligence
robot
Artificial intelligence
Robots

Employability Table for Mechanical and Mechanical College Students in Science and Technology Colleges After Graduation: Analysis of Employability of Graduates and Employers

Chen, D. C., Hsiao, H. C., Chang, J. C., Chen, S. C., Gao, Y. C., Guo, J. Y. & Chen, Y. H., 2019 Jan 1, Innovative Technologies and Learning - 2nd International Conference, ICITL 2019, Proceedings. Rønningsbakk, L., Wu, T-T., Sandnes, F. E. & Huang, Y-M. (eds.). Springer, p. 836-846 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11937 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Table
Mechanical engineering
Students
Self-assessment
Engineering

Finite element analysis of deep drawing

Chen, D. C., Cheng-Yu, L. & Lai, Y. Y., 2019 Jan 1, In : Advances in Mechanical Engineering. 11, 9

Research output: Contribution to journalArticle

Open Access
Deep drawing
Aluminum alloys
Plastic flow
Finite element method
Plastic deformation
2 Citations (Scopus)

Investigation on fracture and conductivity of flex-on-film flexible bonding using anisotropic conductive film considering repeated bending

Lin, C. M., Chen, D. C. & Liu, Y. C., 2019 Aug 1, In : Microsystem Technologies. 25, 8, p. 3017-3026 10 p.

Research output: Contribution to journalArticle

Conductive films
Acoustic impedance
conductivity
electrical resistance
Electrodes

Investigation on Optimization of Baking in Sole Bonding Process

Chen, D. C., Jin, H. W. & Su, J. Z., 2019 Oct 24, In : IOP Conference Series: Materials Science and Engineering. 644, 1, 012002.

Research output: Contribution to journalConference article

Open Access
Heating
Computer aided engineering
Costs
Industry
Temperature

Optimization of the parameters for the rotary diamond dressing of grinding wheels

Liu, C. C., Chen, D. C. & Kuo, T. Y., 2019 Jan 1, In : Smart Science. 7, 3, p. 184-188 5 p.

Research output: Contribution to journalArticle

Open Access
Diamond
Grinding wheels
Grinding
Strombus or kite or diamond
Wheel
2018

Application of ductile fracture criterion for tensile test of zirconium alloy 702

Chen, D. C., Chang, D. Y., Chen, F. H. & Kuo, T. Y., 2018 Mar 1, In : Scientia Iranica. 25, 2B, p. 824-829 6 p.

Research output: Contribution to journalArticle

Zirconium alloys
Ductile fracture
Finite element method
Fracture energy
Materials properties

Developing the capability indicators for CNC machine R&D staff in Taiwan

Chen, D. C. & Chen, T. W., 2018 Jan 1, Innovative Technologies and Learning - First International Conference, ICITL 2018, Proceedings. Lin, L., Wu, T-T., Huang, Y-M., Huang, Y-M., Starcic, A. I. & Shadieva, R. (eds.). Springer Verlag, p. 223-230 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11003 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taiwan
Industry
Questionnaire
Wilcoxon Signed Rank Test

Finite element simulation and analysis of saw cutting

Chen, D. C., Chen, Y. H., You, C. S. & Huang, S. H., 2018 Jul 31, In : MATEC Web of Conferences. 185, 00021.

Research output: Contribution to journalConference article

Open Access
Sawing
Aluminum
Structural design
Wear of materials
Finite element method

Generalized optimizations of two-stage forging of micro/meso copper fastener

Lin, S. H., Chai, U. C., Tzou, G. Y. & Chen, D. C., 2018 Jul 31, In : MATEC Web of Conferences. 185, 00002.

Research output: Contribution to journalConference article

Open Access
Fasteners
Forging
Copper
Taguchi methods
Innovation

Integration of meta-analysis, analytic hierarchy process, and Taguchi method to examine tool wear

Chen, D. C., You, C. S. & Ting, J. C., 2018 Sep 1, In : Journal of Technology. 33, 3, p. 155-164 10 p.

Research output: Contribution to journalArticle

Taguchi methods
Analytic hierarchy process
Wear of materials
Cutting tools
Signal to noise ratio

Strengthen entrepreneurial capacity in entrepreneurial competitions

Chen, S. C., Hsiao, H. C., Chang, J. C., Chou, C. M. & Chen, D. C., 2018 Jan 1, Proceedings of the 15th International Conference on Cognition and Exploratory Learning in the Digital Age, CELDA 2018. Sampson, D. G., Sampson, D. G., Isaias, P., Ifenthaler, D., Ifenthaler, D. & Rodrigues, L. (eds.). IADIS Press, p. 363-366 4 p. (Proceedings of the 15th International Conference on Cognition and Exploratory Learning in the Digital Age, CELDA 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

entrepreneurship
Students
student
learning
Taiwan
1 Citation (Scopus)

Study of membrane restrictors in hydrostatic bearing

Chen, D. C., Chen, M. F., Pan, C. H. & Pan, J. Y., 2018 Sep 1, In : Advances in Mechanical Engineering. 10, 9

Research output: Contribution to journalArticle

Hydrostatic bearings
Membranes
Diaphragms
Bearings (structural)
Feedback

Study of Storage Shelves Deformation Using Finite Element Analysis during Seismic

Chen, D. C. & Kuo, T. Y., 2018 Apr 23, In : MATEC Web of Conferences. 167, 03008.

Research output: Contribution to journalConference article

Finite element method
Earthquakes
Warehouses
Industry
2017
5 Citations (Scopus)

A block-based division reversible data hiding method in encrypted images

Liu, W. L., Leng, H. S., Huang, C. K. & Chen, D. C., 2017 Dec 1, In : Symmetry. 9, 12, 308.

Research output: Contribution to journalArticle

Data Hiding
division
Division
Pixels
Digital storage

Diamond shape division reversible data hiding in encrypted images

Huang, C. K., Chen, D. C., Liu, W. L. & Huang, S. C., 2017 Dec 1, In : ICIC Express Letters, Part B: Applications. 8, 12, p. 1559-1566 8 p.

Research output: Contribution to journalArticle

Diamonds
Pixels
Statistical methods

Multi-stage forging on torx-pin screw with high torque

Tzou, G. Y., Chen, D. C. & Lin, S. H., 2017 Aug 4, In : MATEC Web of Conferences. 119, 01048.

Research output: Contribution to journalConference article

Forging
Torque
Finite element method
Needles
Friction

Optimum design of Si-Cr alloy springs for seismic vibration isolator

Chen, D. C., Kao, S. H., Chen, L. R., Wang, S. J., Chen, C. Y. & Huang, C. K., 2017 Jan 1, Advances in Engineering Plasticity and its Application XIII. Yoshida, F. & Hamasaki, H. (eds.). Trans Tech Publications Ltd, p. 700-705 6 p. (Key Engineering Materials; vol. 725 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stress analysis
Wire
Optimum design

Simulation analysis of turbine blade in 3D printing aquarium

Chen, D. C., Lai, B. Y. & Gao, F. Y., 2017 Sep 21, In : MATEC Web of Conferences. 123, 00008.

Research output: Contribution to journalConference article

Turbomachine blades
Printing
Turbines
Stress analysis
Product design
Aluminum alloys
Abrasion
Thread cutting
Cutting fluids
Cutting tools

Using AHP to critical thinking develop in precision measurement of vocational college students

Chen, D. C., You, C. S., Gao, F. Y. & Lai, B. Y., 2017 Jan 1, Emerging Technologies for Education - 1st International Symposium, SETE 2016 Held in Conjunction with ICWL 2016, Revised Selected Papers. Gennari, R., Cao, Y., Huang, Y-M., Wu, W. & Xie, H. (eds.). Springer Verlag, p. 117-122 6 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10108 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Critical Thinking
Analytic hierarchy process
Analytic Hierarchy Process
Students
Content Analysis

Using AHP to project-based learning develop in machinery manufacturing of technology universities students

Chen, D. C., You, C. S. & Huang, Y. C., 2017 Jan 1, Emerging Technologies for Education - 2nd International Symposium, SETE 2017, Held in Conjunction with ICWL 2017, Revised Selected Papers. Huang, T-C., Lau, R., Huang, Y-M., Spaniol, M. & Yuen, C-H. (eds.). Springer Verlag, p. 154-160 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10676 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Project-based Learning
Analytic hierarchy process
Analytic Hierarchy Process
Machinery
Manufacturing

Vibration characteristics and modal analysis of a grinding machine

Chen, D. C., Chen, M. F., Kang, J. H. & Lai, C. C., 2017 Dec 1, In : Journal of Vibroengineering. 19, 8, p. 6288-6300 13 p.

Research output: Contribution to journalArticle

Grinding machines
Modal analysis
Finite element method
Spectrum analyzers
Machine design
3 Citations (Scopus)

Warpage Analysis of a Plastic Spur Gear Injection Molding

Chen, D. C., Huang, C. K. & Lin, J. W., 2017 Oct 2, In : Smart Science. 5, 4, p. 206-213 8 p.

Research output: Contribution to journalArticle

Spur gears
Injection Molding
Injection molding
Plastics
Trace
2016

Enhancement of extrusion die learning based on a simulation analysis

Chen, D. C., You, C. S. & Liu, K. H., 2016 Jan 1, In : World Transactions on Engineering and Technology Education. 14, 2, p. 282-287 6 p.

Research output: Contribution to journalArticle

Extrusion dies
Students
simulation
learning
student
2 Citations (Scopus)

Finite element analysis of chip breaker geometry in turning process

Chen, D-C., You, C. S. & Kao, S. H., 2016 Jul 1, In : Advances in Mechanical Engineering. 8, 7, p. 1-10 10 p.

Research output: Contribution to journalArticle

Wear of materials
Cutting tools
Finite element method
Geometry
Aluminum alloys

Study of piezoelectric materials combined with electromagnetic design for bicycle harvesting system

Chen, D. C., Kao, S. H. & Huang, C. K., 2016 Apr, In : Advances in Mechanical Engineering. 8, 4, p. 1-11 11 p.

Research output: Contribution to journalArticle

Bicycles
Piezoelectric materials
Energy harvesting
Electric coils
Magnetoelectric effects
3 Citations (Scopus)

Study on wire rod drawing process using the rotating die

Tzou, G. Y., Chen, D-C. & Lin, S. H., 2016 Jan 1, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 63-67 5 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wire
Finite element method
Friction
Angular velocity

整合QFD, TRIZ及田口法研發破壞性創新之自行車鏈輪製程設計

Translated title of the contribution: Conforms with QFD, TRIZ and bicycle of chain wheel process Taguchi multi-class research and development destructiveness innovation designsChen, D-C., You, C. S., Ni, C. H. & Yu, M. J., 2016 Jan 1, In : International Journal of Systematic Innovation. 4, 1, p. 1-15 15 p.

Research output: Contribution to journalArticle

Bicycles
Wheels
Innovation
Product development
Taguchi methods
2015
1 Citation (Scopus)
Stainless Steel
Lasers
Stainless steel
Solar cells
Scanning
Bicycles
Aluminum alloys
Friction
Metal forming
Aluminum

Finite element analysis of advanced bicycle precision brake disk forming technology

Chen, D. C., Kang, J. H. & Lai, C. C., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 12004. (MATEC Web of Conferences; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Brakes
Finite element method
Modal analysis
Braking
1 Citation (Scopus)

Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy

Chen, D. C. & You, C. S., 2015 Jan 1, In : Strength of Materials. 47, 1, p. 122-127 6 p.

Research output: Contribution to journalArticle

Aluminum alloys
Ductile fracture
Finite element method
Stamping
Forging

Investigation into bicycle front fork forming process of simulation and experiment

Chen, D. C. & Ku, W. H., 2015 Jan 1, Advances in Engineering Plasticity XII. Trans Tech Publications Ltd, Vol. 626. p. 199-204 6 p. (Key Engineering Materials; vol. 626).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Forging
Experiments
Taguchi methods
Titanium alloys
Forging
Friction
Finite element method
Torque
Shear stress

Study of 6061 aluminum alloy milling using four- blade face cutter

Chen, D-C., You, C. S., Tu, C. A. & Ni, C. H., 2015 Jan 1, Materials and Technologies in Precision Machinery. Tzou, G-Y. (ed.). Trans Tech Publications Ltd, p. 62-68 7 p. (Key Engineering Materials; vol. 661).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Milling cutters
Aluminum alloys
Finite element method
Aluminum
Wear of materials
2014
11 Citations (Scopus)

Analysis and experiment of 7075 aluminum alloy tensile test

Chen, D. C., You, C. S. & Gao, F. Y., 2014 Jan 1, In : Procedia Engineering. 81, p. 1252-1258 7 p.

Research output: Contribution to journalConference article

Ductile fracture
Aluminum alloys
Experiments
Stamping
Aluminum

Analysis of insulating object plastic injection forming of bicycle dynamo hub power connector

Chen, D-C., Jao, C. H. & Huang, C. K., 2014 Jan 1, Metal Forming 2014. Fratini, L. & Micari, F. (eds.). Trans Tech Publications Ltd, p. 791-797 7 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Plastics
Global warming
Industry
Welds
2 Citations (Scopus)

An investigation into optimized Ti-6Al-4V titanium alloy equal channel angular extrusion process

Chen, D-C., Li, Y. J. & Tzou, G. Y., 2014 Jan 1, Applied Science and Precision Engineering Innovation. p. 181-186 6 p. (Applied Mechanics and Materials; vol. 479-480).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium alloys
Extrusion
Plastic deformation
Taguchi methods
Processing
3 Citations (Scopus)

An investigation into the shape rolling of sectioned sheets with internal voids using the finite element method

Chen, D-C., 2014 Jan 1, In : Procedia Engineering. 79, p. 173-178 6 p.

Research output: Contribution to journalConference article

Analytical models
Plastic deformation
Plastics
Finite element method
Defects

Finite element analysis and mold design of forging process of highway bicycle pedal

Chen, D. C., Chen, W. J., Hong, T. L., Chen, S. H., Lin, Y. X. & Tsai, M. J., 2014 Jan 7, Advances in Materials and Processing Technologies XV. p. 63-69 7 p. (Materials Science Forum; vol. 773-774).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

pedals
bicycle
Bicycles
forging
Forging
3 Citations (Scopus)

Optimal Process Conditions for the Manufacture of Aluminum Alloy Bicycle Pedals

Chen, D-C., Lin, J. G., Ku, W. H. & Shiu, J. R., 2014 Jan 1, In : Advances in Mechanical Engineering. 2014, 601253.

Research output: Contribution to journalArticle

Bicycles
Aluminum alloys
Forging
Taguchi methods
Software packages

The identification of nonlinear systems using C(t) - K (t) plane coordinates

Chen, M. F., Chen, D. C., Yang, C. H. & Tseng, S. F., 2014, In : Mathematical Problems in Engineering. 2014, 497872.

Research output: Contribution to journalArticle

Cartesian plane
Nonlinear systems
Identification (control systems)
Bearings (structural)
Nonlinear Systems
1 Citation (Scopus)

Thermal Effect on a CIGS Thin-Film Solar Cell P2 Layer by Using a UV Laser

Chen, D. C., Chen, M. F. & Chen, M. R., 2014 Jan 1, In : Advances in Mechanical Engineering. 2014, 723136.

Research output: Contribution to journalArticle

Ultraviolet lasers
Thermal effects
Lasers
Electrodes
Solar cells
2013
2 Citations (Scopus)

Analysis of forging forming of 6061 aluminum alloy bicycle pedal

Chen, D. C., Shiu, J. R., Nian, F. L. & Chen, M. R., 2013 Jan 24, Frontiers of Manufacturing and Design Science III. PART 1 ed. p. 31-35 5 p. (Applied Mechanics and Materials; vol. 271, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Forging
Aluminum alloys
Taguchi methods
Sports
4 Citations (Scopus)
Analysis of variance (ANOVA)
Extrusion
Bending (forming)
Taguchi methods
Particle swarm optimization (PSO)

Design and surface roughness analysis of thin-sheet plastic injection forming

Chen, D-C., Pan, J. Y., Gao, J. W. & Chen, W-J., 2013 Aug 8, Intelligent Technologies and Engineering Systems. p. 743-753 11 p. (Lecture Notes in Electrical Engineering; vol. 234 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic sheets
Surface roughness
Plastics
Plastics molding
Plastic products
1 Citation (Scopus)

Effect of Electrode Route Motion on Electrode Wear in EDM Machining of Mold Steel

Chen, D. C., Wang, Y. K. & Lin, G. F., 2013 Oct, In : Arabian Journal for Science and Engineering. 38, 10, p. 2793-2800 8 p.

Research output: Contribution to journalArticle

Electric discharge machining
Machining
Wear of materials
Electrodes
Steel
1 Citation (Scopus)

Optimization analysis of A7075 bicycle stem forging process

Chen, D-C., Shiu, J. R. & Lin, J. G., 2013 Jul 29, The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales. p. 227-233 7 p. (Key Engineering Materials; vol. 554-557).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bicycles
Forging
Taguchi methods
Stress analysis
Structural analysis