Department of Industrial Education and Technology

  • Taiwan

Research Output

Optimal controller design for a matrix converter based surface mounted PMSM drive system

Chen, D. F. & Liu, T. H., 2003 Jul 1, In : IEEE Transactions on Power Electronics. 18, 4, p. 1034-1046 13 p.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Optimal design of DC-DC converter with LC snubber by hybrid method

Chen, C. K., Huang, C. K., Nien, H. H., Changchien, S. K., Chan, C. H. & Wu, S. Y., 2008 Sep 30, 3rd International Conference on Innovative Computing Information and Control, ICICIC'08. 4603355. (3rd International Conference on Innovative Computing Information and Control, ICICIC'08).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Optimal design of lossless passive snubber for DC/DC converters

Huang, C-K., Chen, C. T., Nien, H. H., Changchien, S. K. & Shieh, H. W., 2006 Dec 1, First International Conference on Innovative Computing, Information and Control 2006, ICICIC'06. p. 599-602 4 p. 1691871. (First International Conference on Innovative Computing, Information and Control 2006, ICICIC'06).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimal design using clonal selection algorithm

Su, Y. H., Shyr, W. J. & Su, T. J., 2005 Dec 1, Knowledge-Based Intelligent Information and Engineering Systems - 9th International Conference, KES 2005, Proceedings. p. 604-610 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 3681 LNAI).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Optimal pattern radiation design of linear adaptive array antenna using Amplitude-Phase Perturbations based on particle swarm optimization

Hsu, C. H., Chen, C. H., Shyr, W. J., Kuo, K. H., Lin, T. C. & Chung, Y. N., 2011 Apr 1, In : ICIC Express Letters, Part B: Applications. 2, 2, p. 481-486 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Optimal planning of a load transfer substation pair between two normally closed-loop feeders considering minimization of system power losses using a genetic algorithm

Huang, W-T., Yao, K., Chen, S. T., Nien, H. H., Lin, D. C. & Huang, P. T., 2010 Dec 1, Proceedings - 4th International Conference on Genetic and Evolutionary Computing, ICGEC 2010. p. 453-456 4 p. 5715467. (Proceedings - 4th International Conference on Genetic and Evolutionary Computing, ICGEC 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimal planning of energy conservation for vocational high schools in Taiwan

Liao, C. W., Yao, K. C. & Chin, D. F., 2007 Jan 1, Second International Conference on Innovative Computing, Information and Control, ICICIC 2007. IEEE Computer Society, 4427741. (Second International Conference on Innovative Computing, Information and Control, ICICIC 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
1 Citation (Scopus)

Optimal Process Conditions for the Manufacture of Aluminum Alloy Bicycle Pedals

Chen, D-C., Lin, J. G., Ku, W. H. & Shiu, J. R., 2014 Jan 1, In : Advances in Mechanical Engineering. 2014, 601253.

Research output: Contribution to journalArticle

3 Citations (Scopus)
13 Citations (Scopus)

Optimal radiation pattern design of adaptive linear phased array antenna using memetic algorithms

Hsu, C. H., Shyr, W-J., Kuo, K. H. & Chou, P. H., 2008 Sep 1, In : International Journal of Innovative Computing, Information and Control. 4, 9, p. 2391-2403 13 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Optimization analysis of A7075 bicycle stem forging process

Chen, D-C., Shiu, J. R. & Lin, J. G., 2013 Jul 29, The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales. p. 227-233 7 p. (Key Engineering Materials; vol. 554-557).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Optimization design of a gating system for sand casting aluminium A356 using a Taguchi method and multi-objective culture-based QPSO algorithm

Chen, W. J., Lin, C. X., Chen, Y. T. & Lin, J. R., 2016 Apr, In : Advances in Mechanical Engineering. 8, 4, p. 1-14 14 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Optimization design of improving signal integrity for enhancing differential-mode transmission lines

Chen, W. J. & Wu, M. H., 2012 Feb 2, Advances in Electronic Engineering, Communication and Management Vol. 2 - Proceedings of 2011 International Conference on Electronic Engineering, Communication and Management, EECM 2011. p. 243-248 6 p. (Lecture Notes in Electrical Engineering; vol. 140 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimization design of parameters with hybrid particle swarm optimization algorithm in multi-hole extrusion process

Chen, W-J., Chen, D-C., Su, W. C. & Nian, F. L., 2012 Feb 2, Advances in Electronic Engineering, Communication and Management Vol. 2 - Proceedings of 2011 International Conference on Electronic Engineering, Communication and Management, EECM 2011. p. 279-284 6 p. (Lecture Notes in Electrical Engineering; vol. 140 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Optimization of the parameters for the rotary diamond dressing of grinding wheels

Liu, C. C., Chen, D. C. & Kuo, T. Y., 2019 Jan 1, In : Smart Science. 7, 3, p. 184-188 5 p.

Research output: Contribution to journalArticle

Open Access

Optimization of the singular configuration for a novel five axis machine tool

Lai, Y. L., Liao, C. C., Chan, H. Y., Ke, K. H. & Huang, H. Z., 2016 Jan 1, In : Journal of Technology. 31, 1, p. 27-33 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Optimization Path programming using improved multigroup ant colony algorithms

Chen, W-J., Jheng, L. J., Chen, Y. T. & Chen, D., 2013 Aug 8, Intelligent Technologies and Engineering Systems. p. 267-275 9 p. (Lecture Notes in Electrical Engineering; vol. 234 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Optimizing beam pattern of linear adaptive phase array antenna based on Particle Swarm Optimization

Hsu, C. H., Chen, C. H., Shyr, W. J., Kuo, K. H., Chung, Y. N. & Lin, T. C., 2010 Dec 1, Proceedings - 4th International Conference on Genetic and Evolutionary Computing, ICGEC 2010. p. 586-589 4 p. 5715500. (Proceedings - 4th International Conference on Genetic and Evolutionary Computing, ICGEC 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Optimizing interference cancellation of adaptive linear array by phase-only perturbations using genetic algorithms

Hsu, C. H., Shyr, W-J. & Kuo, K. H., 2005 Dec 1, Knowledge-Based Intelligent Information and Engineering Systems - 9th International Conference, KES 2005, Proceedings. Vol. 3681 LNAI. p. 561-567 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 3681 LNAI).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Optimizing linear adaptive broadside array antenna by amplitude-position perturbations using memetic algorithms

Hsu, C. H. & Shyr, W. J., 2005 Dec 1, Knowledge-Based Intelligent Information and Engineering Systems - 9th International Conference, KES 2005, Proceedings. Vol. 3681 LNAI. p. 568-574 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 3681 LNAI).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

26 Citations (Scopus)

Optimizing PSNR for image watermarking using summation quantization on DWT coefficients

Yang, C. T., Chu, W. C. C., Huang, H. N., Chen, S. T., Chen, D. F., Lin, C. C. & Chang, C. H., 2015 Sep 21, Proceedings - 2015 IEEE 39th Annual Computer Software and Applications Conference - Stephen S. Yau Academic Symposium, COMPSAC 2015. Huang, G., Chu, W., Hsiung, P-A., Yang, J., Chang, C. K., Ahamed, S. I. & Crnkovic, I. (eds.). IEEE Computer Society, p. 68-74 7 p. 7273294. (Proceedings - International Computer Software and Applications Conference; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Optimum design course supported by AIS algorithm for undergraduate students

Shyr, W. J. & Lu, C. Y., 2006 Dec 1, First International Conference on Innovative Computing, Information and Control 2006, ICICIC'06. p. 583-586 4 p. 1691867. (First International Conference on Innovative Computing, Information and Control 2006, ICICIC'06).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimum design of Si-Cr alloy springs for seismic vibration isolator

Chen, D. C., Kao, S. H., Chen, L. R., Wang, S. J., Chen, C. Y. & Huang, C. K., 2017 Jan 1, Advances in Engineering Plasticity and its Application XIII. Yoshida, F. & Hamasaki, H. (eds.). Trans Tech Publications Ltd, p. 700-705 6 p. (Key Engineering Materials; vol. 725 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Passivity analysis for uncertain time-varying delayed neural networks with neutral type

Liao, C. W. & Lu, C. Y., 2007 Jan 1, Second International Conference on Innovative Computing, Information and Control, ICICIC 2007. IEEE Computer Society, 4427715. (Second International Conference on Innovative Computing, Information and Control, ICICIC 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Password authenticated key exchange and protected password change protocols

Chang, T. Y., Hwang, M. S. & Yang, C. C., 2017 Aug, In : Symmetry. 9, 8, 134.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Patent enforcement strategies in the United States: An integrative framework

Lo, C., Lu, S. Y. & Her Hsieh, W., 2013 Jan 1, In : Journal of Intellectual Property Rights. 18, 1, p. 56-66 11 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

PC-based virtual bode analyzer design and application in automatic measurement of filter manufacturing

Yao, K. C., 2009 Mar 1, In : ICIC Express Letters. 3, 1, p. 33-40 8 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Perspectives of university students on cooperative learning by moodle

Liao, C. W., Chen, F. S. & Chen, T. H., 2011 Jun 1, In : International Journal of Digital Content Technology and its Applications. 5, 6, p. 190-197 8 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Power flow analysis of a grid-connected high-voltage microgrid with various distributed resources

Huang, W-T. & Yang, W. C., 2011 Oct 26, 2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings. p. 1471-1474 4 p. 5987225. (2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Power system fast line flow calculation for security control by sensitivity factor

Chen, S. T., Huang, W. T., Lai, W. T. & Shi, P. H., 2007 Jan 1, Second International Conference on Innovative Computing, Information and Control, ICICIC 2007. IEEE Computer Society, 4427743. (Second International Conference on Innovative Computing, Information and Control, ICICIC 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Predicting safety culture: The roles of employer, operations manager and safety professional

Wu, T. C., Lin, C. H. & Shiau, S. Y., 2010 Oct 1, In : Journal of Safety Research. 41, 5, p. 423-431 9 p.

Research output: Contribution to journalArticle

45 Citations (Scopus)

Prediction of photovoltaic power output for microgrids using back-propagation neural network

Huang, W-T., Yao, K., Luo, H. C., Chen, H. T., Chang, Y. R., Lee, Y. D. & Ho, Y. H., 2019 Mar 1, In : ICIC Express Letters, Part B: Applications. 10, 3, p. 211-218 8 p.

Research output: Contribution to journalArticle

Presenting Safety Topics Using a Graphic Novel, Manga, to Effectively Teach Chemical Safety to Students in Japan, Taiwan, and Thailand

Kumasaki, M., Shoji, T., Wu, T-C., Soontarapa, K., Arai, M., Mizutani, T., Okada, K., Shimizu, Y. & Sugano, Y., 2018 Apr 10, In : Journal of Chemical Education. 95, 4, p. 584-592 9 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Project-based course development for enhancing the skills of photonics device design

Chang, S-H., Chen, M. L., Kuo, Y-K. & Shen, Y. C., 2010 Jan 1.

Research output: Contribution to conferencePaper

Project-based course development for enhancing the skills of photonics device design

Chang, S. H., Chen, M. L., Kuo, Y. K. & Shen, Y. C., 2010 Jan 1.

Research output: Contribution to conferencePaper

11 Citations (Scopus)
36 Citations (Scopus)

Promoting science learning in game-based learning with question prompts and feedback

Law, V. & Chen, C. H., 2016 Dec 1, In : Computers and Education. 103, p. 134-143 10 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Prompting in web-based environments: Supporting self-monitoring and problem solving skills in college students

Kauffman, D. F., Ge, X., Xie, K. & Chen, C. H., 2008 May 14, In : Journal of Educational Computing Research. 38, 2, p. 115-137 23 p.

Research output: Contribution to journalArticle

55 Citations (Scopus)

Providing a laboratory for students everywhere

Shyr, W. J., 2009, In : World Transactions on Engineering and Technology Education. 7, 2, p. 198-203 6 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Quality improvement of on-job-training: Using DEA method

Huang, C. C., Huang, M. R., Chang, S-H. & Chung, R. G., 2010 Sep 3, 3CA 2010 - 2010 International Symposium on Computer, Communication, Control and Automation. p. 455-458 4 p. 5533349. (3CA 2010 - 2010 International Symposium on Computer, Communication, Control and Automation; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Real time monitoring of thickness of silicon membrane during wet etching using a novel surface acoustic wave sensor

Lee, C. Y., Wu, T. T., Chen, Y. Y., Cheng, Y. C., Chen, W. J., Pao, S. Y., Chang, P. Z., Chen, P. H., Yen, K. H. & Xiao, F. Y., 2004 Dec 2, In : Proceedings of SPIE - The International Society for Optical Engineering. 5455, p. 319-330 12 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Reengineering industry-oriented educational programs at senior high schools in Taiwan

Chen, D. F., Liu, H. H., Shyr, W. J., Huang, S. J. & Lu, C. H., 2018 Jan 1, In : Eurasia Journal of Mathematics, Science and Technology Education. 14, 7, p. 2757-2769 13 p.

Research output: Contribution to journalArticle

Research on the Combination of IoT and Assistive Technology Device—Prosthetic Damping Control as an Example

Chou, Y. S. & Chen, D., 2019 Jan 1, Frontier Computing - Theory, Technologies and Applications FC 2018. Hung, J. C., Yen, N. Y. & Hui, L. (eds.). Springer Verlag, p. 1934-1938 5 p. (Lecture Notes in Electrical Engineering; vol. 542).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

RETRACTED ARTICLE: Adult distance education students' perspective on critical success factors of e-learning

Chen, F. S., Liao, C-W. & Chen, T. H., 2009 Jan 1, ETT 2009 - 2009 2nd International Conference on Education Technology and Training. IEEE Computer Society, p. 140-143 4 p. 5381396. (ETT 2009 - 2009 2nd International Conference on Education Technology and Training).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Rigid-plastic finite element analysis of cross wedge rolling

Chen, D-C., You, C. S., Lai, G. N. & Ji, S. C., 2010 Aug 17, PRICM7. p. 1610-1613 4 p. (Materials Science Forum; vol. 654-656).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

32 Citations (Scopus)