Department of Industrial Education and Technology

  • Taiwan

Research Output

Conference article

In-situ monitoring of thickness of quartz membrane during batch chemical etching using a novel micromachined acoustic wave sensor

Lee, C. Y., Wu, T. T., Chen, Y. Y., Pao, S. Y., Chen, W. J., Cheng, Y. C., Chang, P. Z., Chen, P. H., Lee, C. K., Dai, C. L., Yang, L. J., Yen, K. S., Xiao, F. Y., Liu, C. W. & Lu, S. S., 2003 Dec 1, In : Proceedings of the Annual IEEE International Frequency Control Symposium. p. 993-1000 8 p.

Research output: Contribution to journalConference article

Investigation on Optimization of Baking in Sole Bonding Process

Chen, D. C., Jin, H. W. & Su, J. Z., 2019 Oct 24, In : IOP Conference Series: Materials Science and Engineering. 644, 1, 012002.

Research output: Contribution to journalConference article

Open Access

Measuring the quality of financial electronic payment system: Combined with fuzzy AHP and fuzzy TOPSIS

Chen, L. R., Liu, K. H., Lai, F. P., Chang, S. S. & Lee, K. Y., 2017, In : Proceedings of the International Conference on Electronic Business (ICEB). 2017-December, p. 146-160 15 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Multi-stage forging on torx-pin screw with high torque

Tzou, G. Y., Chen, D. C. & Lin, S. H., 2017 Aug 4, In : MATEC Web of Conferences. 119, 01048.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Real time monitoring of thickness of silicon membrane during wet etching using a novel surface acoustic wave sensor

Lee, C. Y., Wu, T. T., Chen, Y. Y., Cheng, Y. C., Chen, W. J., Pao, S. Y., Chang, P. Z., Chen, P. H., Yen, K. H. & Xiao, F. Y., 2004 Dec 2, In : Proceedings of SPIE - The International Society for Optical Engineering. 5455, p. 319-330 12 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Robust H control for uncertain nonlinear stochastic neutral systems with state delays

Tsai, J. S. H., Lu, C. Y. & Su, T. J., 2003 Nov 24, In : Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. 4, p. 3164-3169 6 p.

Research output: Contribution to journalConference article

6 Citations (Scopus)

Robust stabilization of uncertain discrete time systems with state delay

Tsai, J. S. H., Lu, C. Y., Su, T. J. & Jong, G. J., 2002 Jan 1, In : Proceedings of the American Control Conference. 3, p. 2404-2405 2 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Robust stabilization of uncertain stochastic neutral systems with multiple delays

Lu, C. Y., Tsai, J. S. H. & Su, T. J., 2002 Jan 1, In : Proceedings of the American Control Conference. 3, p. 2044-2045 2 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Robust stabilization of uncertain stochastic time-delay systems - An LMI-based approach

Su, T. J., Tsai, J. S. H., Lu, C. Y. & Jong, G. J., 2002 Dec 1, In : Proceedings of the IEEE Conference on Decision and Control. 1, p. 668-669 2 p.

Research output: Contribution to journalConference article

Simulation analysis of turbine blade in 3D printing aquarium

Chen, D. C., Lai, B. Y. & Gao, F. Y., 2017 Sep 21, In : MATEC Web of Conferences. 123, 00008.

Research output: Contribution to journalConference article

Study of extrusion processes of CPU heat sink using finite element method

Chen, D-C., Yu, M. Z., Chen, Y. J. & Lin, Y. J., 2008 Jan 1, In : Steel Research International. 79, 2, p. 719-725 7 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Study of Storage Shelves Deformation Using Finite Element Analysis during Seismic

Chen, D. C. & Kuo, T. Y., 2018 Apr 23, In : MATEC Web of Conferences. 167, 03008.

Research output: Contribution to journalConference article

The effectiveness and impact of intellectual property rights: The case of digital content industry of taiwan

Lo, C. C. & Lo, C. C., 2015 Jan 1, In : Springer Proceedings in Business and Economics. 9, p. 201-215 15 p.

Research output: Contribution to journalConference article

The effect of creative instruction on academic performance for mould manufacturing courses

Chen, D. C., Lai, B. Y., Lee, C. Y. & Lai, G. Y., 2012 Jul 27, In : IEEE Global Engineering Education Conference, EDUCON. 6201085.

Research output: Contribution to journalConference article

1 Citation (Scopus)

The market and fabrication of Ultra-High Performance lamps (UHP)

Lee, Y. P., Huang, C. K., Huang, C-K., Chen, Y. J. & Chen, L., 2005 Dec 1, In : Series on Energy and Power Systems. p. 345-348 4 p., 465-807.

Research output: Contribution to journalConference article

3 Citations (Scopus)

Topology optimization for micro rotational mirror design and safe manufacturing

Chen, T-M., Liu, Z., Korvinke, J. G., Kraussel, S. & Wallrabe, U., 2009 Jun 1, In : Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS). p. 1019-1022 4 p., 4805559.

Research output: Contribution to journalConference article

5 Citations (Scopus)
Conference contribution

12° design rule for single crystal silicon curved beam compliant mechanisms with large deformation

Chen, T. M., Krausse, S., Korvink, J. G. & Wallrabe, U., 2010 Jun 1, MEMS 2010 - The 23rd IEEE International Conference on Micro Electro Mechanical Systems, Technical Digest. p. 552-555 4 p. 5442442. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

3D animated facial expression and autism in Taiwan

Cheng, Y. & Ling, S., 2008 Sep 22, Proceedings - The 8th IEEE International Conference on Advanced Learning Technologies, ICALT 2008. p. 17-19 3 p. 4561615. (Proceedings - The 8th IEEE International Conference on Advanced Learning Technologies, ICALT 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

3D Quasi-dynamic load contact analysis of conjugate spur gear

Wu, J. S. S., Hsu, P. J., Hung, J. P. & Lai, Y-L., 2013 Oct 29, Engineering Decisions for Manufacturing Systems. p. 213-219 7 p. (Applied Mechanics and Materials; vol. 404).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A boundary element application of plastic hinges development in a circular Ring

Young, L. J., Hsu, P. L., Yeh, S. S. & Cheng, Y., 2011 Nov 1, Frontiers of Green Building, Materials and Civil Engineering. p. 4476-4482 7 p. (Applied Mechanics and Materials; vol. 71-78).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

ACIA - A course design approach to game design theory

Wu, C. T., Chung, S. M. & Chang, S-S., 2011 Sep 26, Edutainment Technologies: Educational Games and Virtual Reality/Augmented Reality Applications - 6th International Conference on E-learning and Games, Edutainment 2011, Proceedings. p. 195-203 9 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6872 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A current regulated switching strategy with auto-restarting ability during power grid interruptions for matrix converter

Chen, D., Liu, T. H., Yao, K. & Lee, Y. S., 2009 Sep 28, 2009 4th IEEE Conference on Industrial Electronics and Applications, ICIEA 2009. p. 2367-2372 6 p. 5138623

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Adaptive backstepping controller design for a matrix converter based PMSM drive system

Chen, D. F., Liu, T. H. & Hung, C. K., 2002 Jan 1, IEEE ICIT 2002 - 2002 IEEE International Conference on Industrial Technology: "Productivity Reincarnation Through Robotics and Automation". Institute of Electrical and Electronics Engineers Inc., p. 258-263 6 p. 1189902. (Proceedings of the IEEE International Conference on Industrial Technology; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Adaptive control design of band-pass digital filters by poleplacement approach

Yao, K., 2008 Sep 30, 3rd International Conference on Innovative Computing Information and Control, ICICIC'08. 4603349. (3rd International Conference on Innovative Computing Information and Control, ICICIC'08).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A dynamical modulation strategy of the virtual DC-link voltage for matrix converters under input voltage unbalance

Chen, D. & Yao, K., 2006 Dec 1, 2006 1st IEEE Conference on Industrial Electronics and Applications. 4025817

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

A fast image encryption by Bit-Chaotic-Shuffle based on chaotic systems

Huang, C-K., Nien, H. H., Hsu, S. L. & Tu, S. S., 2012 Jan 25, Advanced Research on Engineering Materials, Energy, Management and Control. p. 761-764 4 p. (Advanced Materials Research; vol. 424-425).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A fast way to design adaptive digital high-pass filters

Yao, K. C., Liao, C. W. & Chen, D. F., 2007 Jan 1, Second International Conference on Innovative Computing, Information and Control, ICICIC 2007. IEEE Computer Society, 4427717. (Second International Conference on Innovative Computing, Information and Control, ICICIC 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A fault-tolerant modulation method to counteract the double open-switch fault in matrix converter drive systems without redundant power devices

Chen, D., Nguyen-Duy, K., Liu, T. H. & Andersen, M. A. E., 2012 Dec 1, 10th International Power and Energy Conference, IPEC 2012. p. 65-70 6 p. 6523240. (10th International Power and Energy Conference, IPEC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

A finite element investigation into the changing channel angular extrusion of brass alloy

Chen, D. G., Wang, J. C. & Tzou, G. Y., 2008 Jan 1, Advanced Manufacture: Focusing on New and Emerging Technologies - Selected, peer Reviewed Papers from the 2007 International Conference on Advanced Manufacture. Trans Tech Publications Ltd, p. 90-95 6 p. (Materials Science Forum; vol. 594).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Alliance partners diversity for open innovation: The role of network position and external knowledge acquisition

Wang, C. H., Chang, C. H., Lo, C. C. & Yin, S. H., 2015 Sep 21, PICMET 2015 - Portland International Center for Management of Engineering and Technology: Management of the Technology Age, Proceedings. Daim, T. U., Kozanoglu, D. C., Kocaoglu, D. F., Anderson, T. R., Perman, G. & Niwa, K. (eds.). Portland State University, p. 662-671 10 p. 7273121. (Portland International Conference on Management of Engineering and Technology; vol. 2015-September).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A load transfer scheme of radial distribution feeders considering distributed generation

Yang, W. C. & Huang, W-T., 2010 Sep 2, 2010 IEEE Conference on Cybernetics and Intelligent Systems, CIS 2010. p. 243-248 6 p. 5518551. (2010 IEEE Conference on Cybernetics and Intelligent Systems, CIS 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Analysis of forging forming of 6061 aluminum alloy bicycle pedal

Chen, D. C., Shiu, J. R., Nian, F. L. & Chen, M. R., 2013 Jan 24, Frontiers of Manufacturing and Design Science III. PART 1 ed. p. 31-35 5 p. (Applied Mechanics and Materials; vol. 271, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Analysis of insulating object plastic injection forming of bicycle dynamo hub power connector

Chen, D-C., Jao, C. H. & Huang, C. K., 2014 Jan 1, Metal Forming 2014. Fratini, L. & Micari, F. (eds.). Trans Tech Publications Ltd, p. 791-797 7 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of interconnected distribution feeders under unbalanced operation conditions using OrCAD PSpice

Yang, W. C., Huang, W-T. & Gu, Y. D., 2006 Dec 1, 2006 IEEE Conference on Cybernetics and Intelligent Systems. 4017883. (2006 IEEE Conference on Cybernetics and Intelligent Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Analysis of nonlinear dynamic behavior of micro circular plate actuator using hybrid numerical method

Liu, C-C., 2012 Dec 1, ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers. p. 7402-7409 8 p. (ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of porous beams during H-profiled rolling forming using the finite element method

Chen, D. C. & Chen, C. F., 2007 Dec 1, Computational Plasticity - Fundamentals and Applications, COMPLAS IX. PART 2 ed. p. 761-765 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of wear behaviour of sintering carbide against dlc coated and nitriding steel

Chen, T. M., Lin, Y. C. & Chen, J. N., 2012 Nov 26, Advanced Manufacturing Focusing on Multi-Disciplinary Technologies. p. 60-67 8 p. (Advanced Materials Research; vol. 579).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An analysis of the function and training strategies of teaching assistants at technological and vocational colleges in Taiwan

Liao, C. W., Tien, L. C. & Lin, S. Y., 2011 Sep 8, Advances in Computer Science, Environment, Ecoinformatics, and Education - International Conference, CSEE 2011, Proceedings. PART 5 ed. p. 320-328 9 p. (Communications in Computer and Information Science; vol. 218 CCIS, no. PART 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An area-decomposition method for a nesting system

Lai, Y. L., Chen, J. H. & Luo, T. L., 2009 Nov 16, 2009 WRI World Congress on Computer Science and Information Engineering, CSIE 2009. Vol. 5. p. 392-396 5 p. 5170565

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A new approach to determine the critical path in stochastic activity network

Chu, E. M., Chang, K. Y., Lu, C-Y., Hsu, C. H., Liu, C. H. & Hsiao, Y. C., 2014 Jan 1, Proceedings - 2014 International Symposium on Computer, Consumer and Control, IS3C 2014. IEEE Computer Society, p. 1123-1128 6 p. 6846084. (Proceedings - 2014 International Symposium on Computer, Consumer and Control, IS3C 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A new delay-dependent approach to robust stability for uncertain hybrid bidirectional associative memory neural networks with time-varying delays

Lu, C-Y., Su, T. J. & Shyr, W-J., 2006 Dec 1, First International Conference on Innovative Computing, Information and Control 2006, ICICIC'06. p. 591-594 4 p. 1691869. (First International Conference on Innovative Computing, Information and Control 2006, ICICIC'06).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A new pixel-chaotic-shuffle method for image encryption

Nien, H. H., Changchien, S. K., Wu, S. Y. & Huang, C-K., 2008 Dec 1, 2008 10th International Conference on Control, Automation, Robotics and Vision, ICARCV 2008. p. 883-887 5 p. 4795634

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

An investigation into optimized Ti-6Al-4V titanium alloy equal channel angular extrusion process

Chen, D-C., Li, Y. J. & Tzou, G. Y., 2014 Jan 1, Applied Science and Precision Engineering Innovation. p. 181-186 6 p. (Applied Mechanics and Materials; vol. 479-480).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

An investigation of business and management cluster's students' motivation of taking technician certification at vocational high schools in central Taiwan

Liao, C-W., Lin, S. Y., Chen, H. L. & Lai, C. J., 2013 Jan 1, 7th International Conference on Knowledge Management in Organizations: Service andCloud Computing. Springer Verlag, p. 275-281 7 p. (Advances in Intelligent Systems and Computing; vol. 172 AISC).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An iteration method to sub-optimal output feedback computer control of decentralized singularly-perturbed systems

Yao, K. C., 2007 Jan 1, Second International Conference on Innovative Computing, Information and Control, ICICIC 2007. IEEE Computer Society, 4427747. (Second International Conference on Innovative Computing, Information and Control, ICICIC 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An optimal designed RCD snubber for DC-DC converters

Huang, C. K., Nien, H. H., Changchien, S. K., Chan, C. H. & Chen, C. K., 2008, 2008 10th International Conference on Control, Automation, Robotics and Vision, ICARCV 2008. p. 2202-2207 6 p. 4795873. (2008 10th International Conference on Control, Automation, Robotics and Vision, ICARCV 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)

A novel mobile IP registration scheme for hierarchical mobility management

Yang, C. C., Li, J. W. & Chang, T-Y., 2003 Jan 1, Proceedings - 2003 International Conference on Parallel Processing Workshops, ICPPW 2003. Huang, C-H. & Ramanujam, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 367-374 8 p. 1240391. (Proceedings of the International Conference on Parallel Processing Workshops; vol. 2003-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

A novel sliding-mode controller design for a matrix converter drive system

Chen, D. F. & Yao, K. C., 2009 Nov 27, Proceedings - 2009 9th International Conference on Hybrid Intelligent Systems, HIS 2009. p. 134-137 4 p. 5254550. (Proceedings - 2009 9th International Conference on Hybrid Intelligent Systems, HIS 2009; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

A novel strategy of a matrix converter-PMSM drive system during lightning protection interval

Liu, T. H. & Chen, D., 2011 Dec 1, 2011 7th Asia-Pacific International Conference on Lightning, APL2011. p. 30-35 6 p. 6111068. (2011 7th Asia-Pacific International Conference on Lightning, APL2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution