Department of Industrial Education and Technology

  • Taiwan

Research Output

2020
Open Access
1 Citation (Scopus)

Development of professional competencies for artificial intelligence in finite element analysis

Chen, D. C., You, C. S. & Su, M. S., 2020 Jan 1, (Accepted/In press) In : Interactive Learning Environments.

Research output: Contribution to journalArticle

Neutral current reduction in three-phase four-wire distribution feeders by optimal phase arrangement based on a full-scale net load model derived from the FTU data

Lee, Y. D., Jiang, J. L., Ho, Y. H., Lin, W. C., Chih, H. C. & Huang, W. T., 2020 Apr, In : Energies. 13, 7, 1844.

Research output: Contribution to journalArticle

Open Access

The influence of performance feedback frequency and affective commitment on the sunk cost effect

Chen, D. F., Chen, P. K., Chung, S. H., Cheng, K. C. & Wu, C. H., 2020 Jan 1, (Accepted/In press) In : Managerial and Decision Economics.

Research output: Contribution to journalArticle

Open Access
2019

A Study Regarding the Gap between the Industry and Academia Expectations for College Student's Employability

Sui, F. M., Chang, J. C., Hsiao, H. C., Chen, S. C. & Chen, D. C., 2019 Jan 9, 2018 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2018. IEEE Computer Society, p. 1573-1577 5 p. 8607269. (IEEE International Conference on Industrial Engineering and Engineering Management; vol. 2019-December).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Augmented Reality Enhanced Ubiquitous-Learning in Museum

Lin, Y. H., Chang, S. H., Huang, T. C., Lin, Y. T. & Chen, Y. J., 2019 Aug, In : International Journal of Information and Education Technology. 9, 8, p. 543-547 5 p.

Research output: Contribution to journalArticle

Open Access

Development of assessment indicators for measuring the student learning effects of artificial intelligence-based robot design

Shyr, W-J., Yang, F. C., Liu, P. W., Hsieh, Y. M., You, C. S. & Chen, D-C., 2019 Jul 1, In : Computer Applications in Engineering Education. 27, 4, p. 863-868 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
6 Citations (Scopus)

Employability Table for Mechanical and Mechanical College Students in Science and Technology Colleges After Graduation: Analysis of Employability of Graduates and Employers

Chen, D. C., Hsiao, H. C., Chang, J. C., Chen, S. C., Gao, Y. C., Guo, J. Y. & Chen, Y. H., 2019 Jan 1, Innovative Technologies and Learning - 2nd International Conference, ICITL 2019, Proceedings. Rønningsbakk, L., Wu, T-T., Sandnes, F. E. & Huang, Y-M. (eds.). Springer, p. 836-846 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11937 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluating thematic-approach teaching of robot design and practice course through psychomotor and affective domains

Yao, K., Wu, T-C., Hsu, L. C. & Huang, W-T., 2019 Jan 1, In : ICIC Express Letters. 13, 1, p. 41-49 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Finite element analysis of deep drawing

Chen, D. C., Cheng-Yu, L. & Lai, Y. Y., 2019 Jan 1, In : Advances in Mechanical Engineering. 11, 9

Research output: Contribution to journalArticle

Open Access

Fluorescent Lamp Effect Correction on Capacitive Touch Panel by Timely Update Predicted Covariance Matrix

Chih, H. C., Huang, W. T. & Yao, K. C., 2019 Jul, In : IEEE Transactions on Industrial Electronics. 66, 7, p. 5508-5515 8 p., 8458358.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Investigation on fracture and conductivity of flex-on-film flexible bonding using anisotropic conductive film considering repeated bending

Lin, C. M., Chen, D. C. & Liu, Y. C., 2019 Aug 1, In : Microsystem Technologies. 25, 8, p. 3017-3026 10 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Investigation on Optimization of Baking in Sole Bonding Process

Chen, D. C., Jin, H. W. & Su, J. Z., 2019 Oct 24, In : IOP Conference Series: Materials Science and Engineering. 644, 1, 012002.

Research output: Contribution to journalConference article

Open Access

Methodology to optimize dead yarn and tufting time for a high performance CNC by heuristic and genetic approach

Lai, Y. L., Shen, P. C., Liao, C. C. & Luo, T. L., 2019 Apr, In : Robotics and Computer-Integrated Manufacturing. 56, p. 157-177 21 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Optimization of the parameters for the rotary diamond dressing of grinding wheels

Liu, C. C., Chen, D. C. & Kuo, T. Y., 2019 Jan 1, In : Smart Science. 7, 3, p. 184-188 5 p.

Research output: Contribution to journalArticle

Open Access

Prediction of photovoltaic power output for microgrids using back-propagation neural network

Huang, W-T., Yao, K., Luo, H. C., Chen, H. T., Chang, Y. R., Lee, Y. D. & Ho, Y. H., 2019 Mar 1, In : ICIC Express Letters, Part B: Applications. 10, 3, p. 211-218 8 p.

Research output: Contribution to journalArticle

Research on the Combination of IoT and Assistive Technology Device—Prosthetic Damping Control as an Example

Chou, Y. S. & Chen, D., 2019 Jan 1, Frontier Computing - Theory, Technologies and Applications FC 2018. Hung, J. C., Yen, N. Y. & Hui, L. (eds.). Springer Verlag, p. 1934-1938 5 p. (Lecture Notes in Electrical Engineering; vol. 542).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Scott Connection Transformer Analysis in the Railway Traction System Using the Simulation Program with Integrated Circuit Emphasis Model

Huang, W. T., Chih, H. C. & Yao, K. C., 2019 Jul, 2019 IEEE 13th International Conference on Power Electronics and Drive Systems, PEDS 2019. Institute of Electrical and Electronics Engineers Inc., 8998760. (Proceedings of the International Conference on Power Electronics and Drive Systems; vol. 2019-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on three-phase power flow approach for unbalanced distribution networks based on circuit models

Chih, H. C., Huang, W. T., Lin, W. C., Yao, K. C., Lee, Y. D., Jiang, J. L. & Lai, H. M., 2019 Oct, In : ICIC Express Letters, Part B: Applications. 10, 10, p. 911-918 8 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
7 Citations (Scopus)

Using deep principal components analysis-based neural networks for fabric pilling classification

Yang, C. S., Lin, C. J. & Chen, W. J., 2019 May, In : Electronics (Switzerland). 8, 5, 474.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)
2 Citations (Scopus)

乾濕機械式板擦機

Chen, T-M., 2019 May 21, Patent No. 1659868

Research output: Patent

靜壓軸承之智慧感測裝置及智慧感測方法

Chen, M-F. & Chen, D-C., 2019 Feb 1, Patent No. I649545

Research output: Patent

2018

A local smoothing interpolation method for short line segments to realize continuous motion of tool axis acceleration

Han, J., Jiang, Y., Tian, X., Chen, F., Lu, C. & Xia, L., 2018 Mar 1, In : International Journal of Advanced Manufacturing Technology. 95, 5-8, p. 1729-1742 14 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Analysis of pull-in characteristics of double-clamped nanobeam incorporating casimir and van der waals effects

Wang, C. C., Lin, C. J., Liu, C. C. & Hsu, C. C., 2018 Jan 1, In : Sensors and Materials. 30, 11, p. 2627-2636 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Application of ductile fracture criterion for tensile test of zirconium alloy 702

Chen, D. C., Chang, D. Y., Chen, F. H. & Kuo, T. Y., 2018 Mar 1, In : Scientia Iranica. 25, 2B, p. 824-829 6 p.

Research output: Contribution to journalArticle

Construction and verification of digital electronics contestants’ indicators for vocational education in Taiwan

Liao, C. W., Chang, T. C., Lin, H. I. & Cheng, P. W., 2018 Aug, In : South African Journal of Education. 38, 3, #1478.

Research output: Contribution to journalArticle

Derivation and application of a new transmission loss formula for power system economic dispatch

Huang, W. T., Yao, K. C., Chen, M. K., Wang, F. Y., Zhu, C. H., Chang, Y. R., Lee, Y. D. & Ho, Y. H., 2018 Feb, In : Energies. 11, 2, en11020417.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Designing an innovative PBL pedagogy to empower language learners

Chen, C. H., Lin, L. F., Wong, L. H., Wu, W. C. V. & Yamamoto, T., 2018 Nov 24, ICCE 2018 - 26th International Conference on Computers in Education, Main Conference Proceedings. Rodrigo, M. M. T., Yang, J-C., Wong, L-H. & Chang, M. (eds.). Asia-Pacific Society for Computers in Education, p. i43-i47 (ICCE 2018 - 26th International Conference on Computers in Education, Main Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Citations (Scopus)

Developing the capability indicators for CNC machine R&D staff in Taiwan

Chen, D. C. & Chen, T. W., 2018 Jan 1, Innovative Technologies and Learning - First International Conference, ICITL 2018, Proceedings. Lin, L., Wu, T-T., Huang, Y-M., Huang, Y-M., Starcic, A. I. & Shadieva, R. (eds.). Springer Verlag, p. 223-230 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11003 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of competences for teppanyaki chefs in food and beverage education

Shyr, W. J., Pan, Y. L., Huang, C. C. & Chang, S. H., 2018 Aug 6, In : British Food Journal. 120, 8, p. 1696-1707 12 p.

Research output: Contribution to journalArticle

Ephemeral-secret-leakage secure ID-based three-party Authenticated Key Agreement Protocol for mobile distributed computing environments

Liu, C. L., Tsai, W. J., Chang, T-Y. & Liu, T. M., 2018 Apr 1, In : Symmetry. 10, 4, 84.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Finite element simulation and analysis of saw cutting

Chen, D. C., Chen, Y. H., You, C. S. & Huang, S. H., 2018 Jul 31, In : MATEC Web of Conferences. 185, 00021.

Research output: Contribution to journalConference article

Open Access

FPGA implementation of a functional neuro-fuzzy network for nonlinear system control

Jhang, J. Y., Tang, K. H., Huang, C. K., Lin, C. J. & Young, K. Y., 2018 Aug 11, In : Electronics (Switzerland). 7, 8, 145.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Generalized optimizations of two-stage forging of micro/meso copper fastener

Lin, S. H., Chai, U. C., Tzou, G. Y. & Chen, D. C., 2018 Jul 31, In : MATEC Web of Conferences. 185, 00002.

Research output: Contribution to journalConference article

Open Access
10 Citations (Scopus)

Improvements of Threshold Signature and Authenticated Encryption for Group Communications

Hwang, M. S., Chang, T. & Yang, C., 2018 Aug 30, In : Journal of Physics: Conference Series. 1069, 1, 012064.

Research output: Contribution to journalConference article

1 Citation (Scopus)
2 Citations (Scopus)

Integration of meta-analysis, analytic hierarchy process, and Taguchi method to examine tool wear

Chen, D. C., You, C. S. & Ting, J. C., 2018 Sep 1, In : Journal of Technology. 33, 3, p. 155-164 10 p.

Research output: Contribution to journalArticle

Inverse kinematics for a novel hybrid parallel–serial five-axis machine tool

Lai, Y. L., Liao, C. C. & Chao, Z. G., 2018 Apr, In : Robotics and Computer-Integrated Manufacturing. 50, p. 63-79 17 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

Investigating mobile emotional learning for children with autistic spectrum disorders

Cheng, Y., Luo, S. Y., Lin, H. C. & Yang, C. S., 2018 Jan 1, In : International Journal of Developmental Disabilities. 64, 1, p. 25-34 10 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2 Citations (Scopus)